

TR Module 10GHz
AERIS-10 Fractal Antenna 32x16
- Size
- 35 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 68
- Pads
- 346
- Tracks, vias
- 759, 202
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Mar 2026
- Updated
- 13 Apr 2026
Overview
TR Module 10GHz is an open-source printed circuit board by oi8509701-ui, from the oi8509701-ui/radar-system repository on GitHub. It is a 4-layer board of 35 × 70 mm with 45 parts on 68 nets, routed with 759 tracks and 202 vias.
It is built around the SN74HC595D and SN74LVTH573PW. Its parts include 16 capacitors, 16 ICs, 8 resistors, 2 inductors and 1 diode. It belongs with the radio and wireless boards of this library.
Main components
2SN74HC595D
SOIC-16-40℃~+85℃ 1 26ns@6V,50pF 29MHz 2V~6V 6mA 74HC 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSTexas InstrumentsShift RegistersSN74LVTH573PW
TSSOP-20-40℃~+85℃ 0.7ns 1.5ns 190uA 2.7V~3.6V 32mA 4.5ns 64mA 74LVTH 8 D Latch Tri-State TSSOP-20 Latches ROHSTexas InstrumentsLatches
README
README.mdX-Band T/R Module (10 GHz) with Fractal Antenna
High-performance single-channel Transmit/Receive (T/R) module for X-band phased array systems (~10–10.5 GHz), featuring integrated beamforming and a compact fractal antenna.
High-performance single-channel Transmit/Receive (T/R) module for X-band phased array systems (~10–10.5 GHz), featuring integrated beamforming and a compact fractal antenna.
⸻
Overview
This project implements a single RF front-end module (tile) designed for scalable phased array systems.
Key features:
• X-band operation (~10–10.5 GHz)
• Integrated PA + LNA + T/R switch (QPM1002)
• Beamforming support (phase + amplitude control)
• Compact fractal antenna (14×14 mm)
• Designed for array scaling (e.g., 256+ elements)
• Optimized for automated routing (Freerouting)⸻
Architecture
RF IN → Phase Shifter → Attenuator → TXIN → [QPM1002] → ANT → Antenna ▲ RF OUT ← Phase Shifter ← Attenuator ← RXOUT ┘
QPM1002 Internal Structure:
• TX path: PA (~35 dBm pulsed)
• RX path: LNA (~2.2 dB NF, ~25 dB gain)
• Internal T/R switch
• Built-in power detector (VDET)⸻
Power Architecture
Rail Voltage Purpose TX_VD +25V Power Amplifier RX_VD +10V LNA VDD_LOGIC +5V Digital logic VDD_IO +3.3V Control interface VG -2.5V GaN gate bias
Converters:
• LM5156 (SEPIC) → 25V
• LM5017 → 10V / 5V
• Charge pump → -2.5V⸻
RF Components
Component Function Notes
QPM1002 T/R front-end Core RF IC TGP2109 Phase shifter (6-bit) 8–12 GHz PE43705 Attenuator (6-bit) 0.5–12 GHz
⸻
PCB
• Substrate: Rogers 4350B
• Stackup: 4 layers (RF + GND + PWR + CTRL)
• Controlled impedance (50 Ω)
• Dense via stitching for RF grounding
• Optimized for high-frequency layout⸻
Thermal Design
Per module dissipation:
Block Power PA ~8 W DC-DC ~5.5 W Beamforming ~1.3 W Other ~1 W
Total: ~16 W per module
For 256 modules:
• Total ≈ 4 kW
• Requires liquid cooling⸻
Control Interface
• SPI (phase + attenuation control)
• GPIO (TX/RX switching)
• I²C (temperature sensors)Logic:
• SN74HC595 (shift register)
• SN74LVTH573 (latch)⸻
Monitoring
• 4× TMP117 temperature sensors:
• RF front-end
• Power stage
• Beamforming chain
• PCB ambient⸻
Power Sequencing
Power-Up:
1. Apply VG (-2.5V)
2. Disable TX/RX
3. Enable RX_VD (10V)
4. Enable TX_VD (25V)
5. Enable TX/RXPower-Down:
1. Disable TX/RX
2. Disable TX_VD
3. Disable RXParts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 |
| 5 | 100nF | C_0402_1005Metric | C21, C22, C23, C24, C25 |
| 1 | 22uH | L_0805_2012Metric | L2 |
| 1 | ACT43750 | TR_Module_Lib:QFN-24_4x4mm_P0.5mm | U4 |
| 1 | Card Edge 40-pin | J1 | |
| 1 | EMI | L_0805_2012Metric | L1 |
| 1 | FB10V_h | R_0402_1005Metric | R1 |
| 1 | FB10V_l | R_0402_1005Metric | R2 |
| 1 | FB5V_h | R_0402_1005Metric | R3 |
| 1 | FB5V_l | R_0402_1005Metric | R4 |
| 1 | FBSEP_h | R_0402_1005Metric | R5 |
| 1 | FBSEP_l | R_0402_1005Metric | R6 |
| 1 | LDO 3.3V | SOT-223-3_TabPin2 | U5 |
| 1 | LM5017 10V | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LM5017 5V | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LM5156 SEPIC | Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm | U1 |
| 1 | MOSFET | SOT-23 | Q1 |
| 1 | QPC0045 RX | TR_Module_Lib:QFN-16_3x3mm_P0.5mm | U10 |
| 1 | QPC0045 TX | TR_Module_Lib:QFN-16_3x3mm_P0.5mm | U9 |
| 1 | QPM1002 | TR_Module_Lib:QFN-24_4x4mm_P0.5mm | U6 |
| 1 | SCL_PU | R_0402_1005Metric | R8 |
| 1 | SDA_PU | R_0402_1005Metric | R7 |
| 1 | SN74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U11 |
| 1 | SN74LVTH573 | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U12 |
| 1 | TGP2109 RX | TR_Module_Lib:QFN-24_4x4mm_P0.5mm | U8 |
| 1 | TGP2109 TX | TR_Module_Lib:QFN-24_4x4mm_P0.5mm | U7 |
| 1 | TMP117 PCB | Package_BGA:Texas_DSBGA-6_0.9x1.4mm_Layout2x3_P0.5mm | U16 |
| 1 | TMP117 PS | Package_BGA:Texas_DSBGA-6_0.9x1.4mm_Layout2x3_P0.5mm | U15 |
| 1 | TMP117 QPM1002 | Package_BGA:Texas_DSBGA-6_0.9x1.4mm_Layout2x3_P0.5mm | U13 |
| 1 | TMP117 SEPIC | Package_BGA:Texas_DSBGA-6_0.9x1.4mm_Layout2x3_P0.5mm | U14 |
| 1 | TVS | D_SMA | D1 |
Similar boards
- 2 layers76.2 × 113 mm

- 2 layers93.1 × 158.3 mm

- 4 layers200 × 130 mm

PicoAWG
Alberta2514640/EIT-Machine
Arbitrary Waveform Generator for the Raspberry Pi Pico 16 Channels
370 parts1 - 2 layers58.4 × 141 mm

Segment Display Board
FRC-1721/AccidentCounter
A digital sign hung in the build space advertising days without incident
94 parts1 - 4 layers79.5 × 94.4 mm

HV ERT sensor
richgumy/black_sensor
A sensor developed using solely a carbon black silicone elastomer composite and the driving electronics.
127 parts1 - 4 layers458.2 × 164 mm

- 2 layers300 × 200 mm

- 2 layers72.5 × 61.5 mm

Questions
How big is the TR Module 10GHz PCB?
It measures 35 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TR Module 10GHz use?
45 parts, built around the SN74HC595D and SN74LVTH573PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TR Module 10GHz KiCad files?
From the oi8509701-ui/radar-system repository on GitHub, at the commit this page was made from: the board is TR_Module_10GHz.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TR Module 10GHz design in my own project?
Its repository states no licence, so its author keeps all rights: ask oi8509701-ui before reusing the design.