

Stair lights
- Size
- 61.5 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 119
- Pads
- 327
- Tracks, vias
- 382, 55
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Oct 2025
- Updated
- 21 Oct 2025
Overview
Stair lights is an open-source printed circuit board by ogruendel, from the ogruendel/stair-lights repository on GitHub. It is a 2-layer board of 61.5 × 100.3 mm with 80 parts on 119 nets, routed with 382 tracks and 55 vias.
It is built around the NRF52840-QIAA-R, TPS63802DLAR and DW01A, with the TP4056-MS, FRC0603J221 TS and 2302V among its other parts. Its parts include 26 resistors, 18 capacitors, 16 transistors, 5 connectors and 4 ICs. It belongs with the nRF52 and nRF5x boards of this library.
Main components
12NRF52840-QIAA-R
AQFN-73-EP(7x7)-95dBm 1.7V~5.5V 2.4GHz 2.4GHz~2.4835GHz 2Mbps 4.82mA 6.26mA 8dBm SPI、USB、UART、ADC、I2S、PWM ZigBee、Bluetooth、LoRa、ISM transceiver AQFN-73-EP(7x7) RF Transceiver ICs ROHSNORDICRF Transceiver ICsTPS63802DLAR
VSON-10(2x3)-40℃~+125℃@(TJ) 1 1.3V~5.5V 1.4MHz、1.6MHz、2.1MHz 1.8V~5.2V 11uA 2A Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-10(2x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDW01A
SOT23-6-40℃~+85℃ 1 1.5V~10V 2.5V 4.3V 700nA Lithium Battery Protection IC Support SOT23-6 Battery Management ROHSHLBattery ManagementTP4056-MS
SOP-8-EP-40℃~+85℃ 1 1A 4.2V 4.2V~5.5V 70uA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout Lithium Battery Support SOP-8-EP Battery Management ROHSMSKSEMIBattery ManagementFRC0603J221 TS
0603-55℃~+155℃ 100mW 220Ω 75V Thick Film Resistor ±100ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSFOJANChip Resistor - Surface Mount2302V
SOT-23-55℃~+150℃ 1 N-channel 184pF 20V 28pF 3A 400mV 43mΩ 850mW SOT-23 MOSFETs ROHSHLMOSFETsCGA0402X7R104K160GT
0402100nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSHREMultilayer Ceramic Capacitors MLCC - SMD/SMTCL05A475MP5NRN
040210V 4.7uF X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCGA0603X5R106K100JT
060310V 10uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSHREMultilayer Ceramic Capacitors MLCC - SMD/SMTCGA0402C0G120J500GT
04020402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSHREMultilayer Ceramic Capacitors MLCC - SMD/SMTCL10A105KO8NNN
060316V 1uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0603WAJ0512
0603-55℃~+155℃ 100mW 5.1kΩ 75V Thick Film Resistor ±100ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 220R | Resistor_SMD:R_0603_1608Metric | R3, R4, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 +1 |
| 14 | 2302V | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C11, C12, C13, C18 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C8, C9, C14 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C10 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | |||
| 1 | #RST | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | 0.47uH | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | 0.5pF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 0.8pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 18650 | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 2M | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4.7nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 511k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 91k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | Antenna_Chip | Inductor_SMD:L_1206_3216Metric | AE1 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J3 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J4 |
| 1 | Conn_01x15 | Connector_JST:JST_XH_S15B-XH-A_1x15_P2.50mm_Horizontal | J5 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6 | Q2 |
| 1 | LED_GREEN | Custom:LED_1.7x1.1mm | D2 |
| 1 | LED_RED | Custom:LED_1.7x1.1mm | D1 |
| 1 | SI2301-ZE | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SWDCLK | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U2 |
| 1 | TPS63802DLAR | Custom:VSON-10 | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | nRF52840 | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U1 |
Similar boards
- 8 layers120 × 100 mm

- 2 layers251.6 × 177.8 mm

MelbourneTrainTracker
itsmevjnk/MelbourneTrainTracker
Melbourne Train Tracker project repository (SIT210, T1/2025)
1,071 parts40 - 4 layers42 × 65 mm

Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT - 4 layers76.1 × 70.7 mm

Usb sp dev
Ismael034/usbsp
Have you ever tried to plug a USB device into a computer that has USB restrictions enabled? It's frustrating, isn't it? You can't use your USB devices, and you have no way to bypass the restrictions.
79 parts2MIT - 4 layers

- 2 layers31.2 × 17.1 mm

Knox Key Kicad
Kingdragoncat/Knox-Key
Knox Key is a high-performance, open-source hardware authenticator designed for secure digital identity and cryptographic operations.
29 parts5 - 2 layers26.3 × 17.1 mm

Kryptonite
samienr/kryptonite
affordable open source USB-C security key using STM32F072CBU6 and ATECC608A
27 parts2MIT - 4 layers42 × 100 mm

LockBox
researchanddesire/assembly-docs
RAD unified assembly docs — ohai.researchanddesire.com
81 parts
Questions
How big is the Stair lights PCB?
It measures 61.5 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stair lights use?
80 parts, built around the NRF52840-QIAA-R, TPS63802DLAR, DW01A and TP4056-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stair lights KiCad files?
From the ogruendel/stair-lights repository on GitHub, at the commit this page was made from: the board is hardware/stair-lights/stair-lights.kicad_pcb and its schematic hardware/stair-lights/led-switches.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stair lights design in my own project?
Its repository states no licence, so its author keeps all rights: ask ogruendel before reusing the design.