

Relay ctrl compressor cabinet
- Size
- 81.9 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 46
- Pads
- 106
- Tracks, vias
- 123, 7
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Aug 2019
- Updated
- 15 Jul 2025
Overview
Relay ctrl compressor cabinet is an open-source printed circuit board by ograsdijk, from the ograsdijk/CeNTREX-pcb repository on GitHub. It is a 2-layer board of 81.9 × 52.1 mm with 19 parts on 46 nets, routed with 123 tracks and 7 vias.
It is built around the TLP222AF. Its parts include 7 connectors, 6 ICs, 4 resistors and 2 capacitors. It belongs with the home automation and IoT boards of this library.
Main components
1README
README.mdCeNTREX-pcb
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | TLP222A | Package_DIP:DIP-4_W7.62mm | U3, U4, U5, U6 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J7 |
| 2 | DB15_Male_MountingHoles | Connector_Dsub:DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1, J2 |
| 1 | 0.1muF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 0.33muF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 4504 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | RJ45_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J3 |
More from ograsdijk/CeNTREX-pcb
12- 2 layers221 × 74.4 mm

- 2 layers221 × 74.4 mm

- 2 layers273.1 × 39.1 mm

- 2 layers55.6 × 80 mm

- 2 layers128.5 × 137.9 mm

- 2 layers128.5 × 137.9 mm

- 2 layers95.3 × 99.1 mm

- 2 layers128.8 × 137.9 mm

- 2 layers

- 2 layers62.5 × 42.7 mm

- 2 layers62.5 × 39.9 mm

- 2 layers96.3 × 94.7 mm

Similar boards
- 2 layers68 × 86.9 mm

NBoxRpi
trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.
95 parts5CC-BY-SA-4.0 - 2 layers100.3 × 99.3 mm

Miatuino
Maverick765/miatuino
まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。
121 parts1GPL-2.0 - 4 layers85 × 45 mm

Poc 4cell
cajt/poc-scp-ft-4s-bms-app
Proof of concept fault tolerant SCP with a BMS Application.
85 partsBSD-2-Clause - 2 layers81.3 × 63.5 mm

- 2 layers21 × 37.3 mm

- 2 layers113.5 × 70.5 mm

- 2 layers71.5 × 50.6 mm

- 2 layers93.2 × 117 mm

Questions
How big is the Relay ctrl compressor cabinet PCB?
It measures 81.9 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay ctrl compressor cabinet use?
19 parts, built around the TLP222AF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay ctrl compressor cabinet KiCad files?
From the ograsdijk/CeNTREX-pcb repository on GitHub, at the commit this page was made from: the board is interlock/relay_ctrl_compressor_cabinet/relay_ctrl_compressor_cabinet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay ctrl compressor cabinet design in my own project?
Its repository states no licence, so its author keeps all rights: ask ograsdijk before reusing the design.