

- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 33
- Nets
- 156
- Pads
- 326
- Tracks, vias
- 541, 74
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Dec 2024
- Updated
- 6 Jul 2025
Overview
Cm4 is an open-source printed circuit board by OE5XRX, from the OE5XRX/RemoteStation repository on GitHub. It is a 4-layer board of 100 × 100 mm with 33 parts on 156 nets, routed with 541 tracks and 74 vias.
It is built around the SN74LV1T34DBV, TF-01A and RT9742GGJ5, with the HR911130A among its other parts. Its parts include 9 resistors, 5 capacitors, 5 connectors, 4 ICs and 2 diodes. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.
Main components
4SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversTF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card ConnectorRT9742GGJ5
TSOT-23-5-40℃~+85℃ 1 1A 2.7V~6V 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHSRichtek TechPower Distribution SwitchesHR911130A
插件0℃~+70℃ 1 Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With Cross Pin With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSHANRUNEthernet Connectors / Modular Connectors (RJ45 RJ11)
README
README.mdRemoteStation
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2k2 | Resistor_SMD:R_0805_2012Metric | R202, R203, R205, R206 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C301, C401, C402 |
| 2 | 100u / 25V | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C101, C201 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R201, R204 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R301, R302 |
| 2 | DF40C-100DS-0.4V_51_ | PRJ:HIROSE_DF40C-100DS-0.4V_51_ | J201, J202 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D201, D202 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102 |
| 2 | TPD4EUSB30 | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U301, U302 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric | R401 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J102 |
| 1 | Conn_02x10_Row_Letter_First | PRJ:PCN10C-20S-2.54DS | J101 |
| 1 | HR911130A | PRJ:HANRUN_HR911130A | J301 |
| 1 | RT9742GGJ5 | Package_TO_SOT_SMD:TSOT-23-5 | U401 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U201 |
| 1 | TF-01A | PRJ:TF-01A | MICRO_SD401 |
The 28 most common of 33 parts.
More from OE5XRX/RemoteStation
4- 4 layers100 × 100 mm

- 4 layers117.4 × 100 mm

- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

Similar boards
- 6 layers100 × 120 mm

Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 4 layers61 × 85.1 mm

- 4 layers220 × 172.8 mm

Hw openmower universal
xtech/hw-openmower-universal
This hardware version is in beta state. Expect for things to not work at the current state!
472 parts20CC-BY-4.0 - 4 layers180 × 170 mm

Hw openmower yardforce
xtech/hw-openmower-yardforce
This repository contains the design files for a custom mainboard specifically designed for converting YardForce mowers to OpenMower
293 parts12CC-BY-4.0 - 6 layers100 × 100 mm

Ai vision
embeddedci-com/pcb-trace-length-analyzer
Two of them, and the difference between them is the point.
370 parts3Apache-2.0 - 4 layers86 × 69 mm

- 6 layers45 × 0 mm

Base board
GeniePod/genie-hardware
GeniePod Home V1 hardware: MVP testing build, wiring, BOM, and planned interface-board/enclosure docs.
222 parts2CERN-OHL-S-2.0 - 4 layers92 × 99.5 mm

Granit
laenzlinger/granit
Custom carrier board for Raspberry Pi CM4/CM5 — minimal offsite backup appliance with JMS578 USB-to-SATA bridge
120 parts2CERN-OHL-P-2.0
Questions
How big is the Cm4 PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Cm4 use?
33 parts, built around the SN74LV1T34DBV, TF-01A, RT9742GGJ5 and HR911130A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cm4 KiCad files?
From the OE5XRX/RemoteStation repository on GitHub, at the commit this page was made from: the board is pcb/cm4/cm4.kicad_pcb and its schematic pcb/bus/bus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cm4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask OE5XRX before reusing the design.