

Apple pi tv board
- Size
- 61 × 85.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 421
- Pads
- 792
- Tracks, vias
- 1,552, 221
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Jul 2024
- Updated
- 2 Aug 2026
Overview
Apple pi tv board is an open-source printed circuit board by brendena, from the brendena/apple_pi_tv repository on GitHub. It is a 4-layer board of 61 × 85.1 mm with 84 parts on 421 nets, routed with 1,552 tracks and 221 vias.
It is built around the RP2354A, 74LVC1G07 and TPS61232DRC, with the TF-01A, RT9742GGJ5 and IRM-V838M3-C/TR1 among its other parts. Its parts include 32 capacitors, 19 resistors, 11 ICs, 6 connectors and 3 diodes. It belongs with the RP2350 boards of this library.
Main components
9RP2354A
QFN-60(7x7)150MHz 32 Bit ARM Cortex-M33 Built-in+External Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Integrated LDO、Calendar function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-60(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)74LVC1G07
SOT-353-40℃~+105℃ 1 1 1.65V~5.5V 1.6ns@5.5V,50pF 24mA 4uA 74LVC Open-drain Power-off isolation、Level shifting Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, TransceiversTPS61232DRC
VSON-10-EP(3x3)-40℃~+125℃@(TJ) 1 2.1A 2.3V~5.5V 2MHz 35uA 5V Boost Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card ConnectorRT9742GGJ5
TSOT-23-5-40℃~+85℃ 1 1A 2.7V~6V 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHSRichtek TechPower Distribution SwitchesIRM-V838M3-C/TR1
SMD-4P,6.6x3mm-20℃~+85℃ 2.7V~5.5V 20m 320uA 38kHz SMD-4P,6.6x3mm Infrared Remote Receiver (IRM) ROHSEverlight ElectronicsInfrared Remote Receiver (IRM)ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystalsH5007NL
SMD-24P,17.5x12.2mm0℃~+70℃ 1.5kV 12.2mm 17.5mm 1CT:1CT 5.72mm SMD-24P,17.5x12.2mm Pulse Transformers ROHSPulse ElecPulse TransformersHDGC1202WR-S-2P
SMD,P=1.2mm,卧贴-40℃~+105℃ 1 1.2mm 1.4mm 1x2P 2 2A 2P 4.3mm 50V Auxiliary Solder Pin Black Gold Phosphor Bronze Pico-EZmate(MX 1.2) Surface Mount, Right Angle UL94V-0 SMD,P=1.2mm,卧贴 Wire To Board Connector ROHSHDGCWire To Board Connector
README
README.mdapple pi tv
The goal is to make a replacement board for the apple tv using a raspberry pi CM4
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C17, C20, C21, C22, C23, C24, C25, C26, C27, C28 |
| 6 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C3, C8, C10, C11, C18, C19 |
| 4 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C2, C13, C15, C16 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C4, C9, C14 |
| 4 | 220R | Resistor_SMD:R_0402_1005Metric | R2, R8, R18, R19 |
| 4 | 75 | Resistor_SMD:R_0402_1005Metric | R14, R15, R16, R17 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R9, R10 |
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_Pad | H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 12k 1% | Resistor_SMD:R_0402_1005Metric | R1, R6 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C29, C30 |
| 2 | 22u | Capacitor_SMD:C_0402_1005Metric | C32, C33 |
| 2 | DF40C-100DS-0.4V_51_ | Hirose:HIROSE_DF40C-100DS-0.4V_51_ | J4, J6 |
| 2 | LED_Small | LED_SMD:LED_0805_2012Metric | D2, D3 |
| 2 | RT9742GGJ5 | Package_TO_SOT_SMD:SOT-23-5 | U5, U12 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1-WL1, JP2-BT1 |
| 2 | TPD4EUSB30 | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U6, U11 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 10K R | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1uH | MDA4020:MDA4020 | L1 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 3.3u | Inductor_SMD:L_Murata_DFE201610P | L2 |
| 1 | 30pF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 5-1775444-8 | 5-1775444-8:TE_5-1775444-8 | J3 |
| 1 | 74LVC1G07 | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | 8.2nf | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Dev_port | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | Extrst | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | H5007NL | H5007NL:SOIC127P1600X551-24N | T1 |
| 1 | HDGC1202WR-S-2P | HDGC:HDGC1202WR-S-02P | J5 |
| 1 | HDMI/USB | apple_tv_parts:apple_tv_hdmi_usb | U1 |
| 1 | IRM-V838M3-C/TR1 | IRM-V838M3-C-TR1:OPTO-SMD_IRM-V838M3-C-TR1 | U7 |
| 1 | MountingHole | apple_tv_parts:ExtendedMountingHole | H1 |
| 1 | RJ45_Shielded | apple_tv_parts:apple_tv_ethernet | J1 |
| 1 | RP2354A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U4 |
| 1 | RPi_4 | greencharge-footprints:RPI-CM4 | U3 |
| 1 | RUN_PG | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | TF-01A | MicroSD:TF-01A | MICRO_SD1 |
| 1 | TPS61232DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U9 |
| 1 | apple tv tos link | apple_tv_parts:apple_tv_tos_link | U2 |
Similar boards
- 4 layers29.5 × 34.2 mm

- 4 layers160 × 110 mm

- 2 layers65 × 30 mm

Povbot2
wattnotions/povbot2
Look in 3dprint folder to find a 3mf file with the chassis , camera holder and wheels ready to print.
29 parts28 - 2 layers126.8 × 48.3 mm

Dc25badge
Matir/DC25Badge
This is an unofficial badge I made for DEF CON 25. It's a blinding party-style badge with 48 individually addressable RGB LEDs.
101 parts1Apache-2.0 - 4 layers100 × 72 mm

Rtl8367-switch
Deco025/rtl8367-switch
Five-port gigabit unmanaged Ethernet switch based on the Realtek RTL8367RB - 4-layer KiCad 10 design with fabrication outputs
229 partsCERN-OHL-S-2.0 - 4 layers

- 4 layers43.3 × 28.3 mm

- 6 layers120 × 40 mm

CM5CarrierV2
AsadImranRafique/CM5-Carrier-Board-Rev2
Open-source six-layer Raspberry Pi CM4/CM5 carrier board with USB-C, 25 W PoE, M.2 NVMe, microSD, I2S, and expansion-board connectors.
62 parts1Apache-2.0
Questions
How big is the Apple pi tv board PCB?
It measures 61 × 85.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Apple pi tv board use?
84 parts, built around the RP2354A, 74LVC1G07, TPS61232DRC and TF-01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Apple pi tv board KiCad files?
From the brendena/apple_pi_tv repository on GitHub, at the commit this page was made from: the board is board/apple_pi_tv_board.kicad_pcb and its schematic board/HDMI_RJ45_USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Apple pi tv board design in my own project?
Its repository states no licence, so its author keeps all rights: ask brendena before reusing the design.