
LuckyAlbatros
oceanKeebs/KeebPort
KeebPort, a split Keyboard architecture using a single micro controller as a central "port"

KeebPort, a split Keyboard architecture using a single micro controller as a central "port"
Ortho BaseLayout is an open-source printed circuit board by oceanKeebs, from the oceanKeebs/KeebPort repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 269.6 × 123.6 mm with 189 parts on 151 nets.
It is built around the SK6812MINI-E and WS2812B. Its parts include 116 diodes, 55 switches and 6 resistors. It belongs with the keyboards and input boards of this library.
Keeb Port is a split keyboard architecture with a central part housing a micro controller and 6 keys (two keys can be replaced with encoders optionally). Right and left part of the split keyboard do not include a micro controller but an IO expander (MCP23017) processing the key activation information and connected via i2c to the central part. The LED control signal is generated by the micro controller and provided via a separate line to both split keyboard parts. Central and split keyboard parts are connected with TRRRS (5-pin). All layouts share the same firmware.
https://github.com/oceanKeebs/qmk_firmware/tree/master/keyboards/oceankeebs/expanded_split_rp_tps43
without via support: https://github.com/oceanKeebs/KeebPort/blob/main/HexFiles/oceankeebs_expanded_split_rp_tps43_default.uf2
with via support: https://github.com/oceanKeebs/KeebPort/blob/main/HexFiles/oceankeebs_expanded_split_rp_tps43_via.uf2
Central part for all split keyboard layouts housing a PGA2040, a TPS65 touch pad and 6 keys (two keys can be replaced with encoders optionally). Needed for all keyboard layouts of this repository.


https://github.com/oceanKeebs/KeebPort/StlFiles/KeebPort_RP2040
A SplitKb Kyria inspired split keyboard layout with more aggressive stagger and added num row. Per side 31 keys are available.


A Lily58 inspired split keyboard layout with 3 additional columns for arrow keys and/or macros. Per side 33 keys are available.


The template can be used a starting point to design compatible custom layouts.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 55 | D_Small | Keyboard_Components:Diode_SMD_Round_Pads | D0_0, D0_1, D0_2, D0_3, D0_4, D0_5, D0_6, D0_7, D0_8, D0_9, D0_10, D1_0, D1_1, D1_2, D1_3, D1_10 +39 |
| 55 | SK6812MINI | Keyboard_Components:SK6812MiniE_MX_Addon | LED0_0, LED0_1, LED0_2, LED0_3, LED0_4, LED0_5, LED0_6, LED0_7, LED0_8, LED0_9, LED0_10, LED1_0, LED1_1, LED1_2, LED1_3, LED1_10 +39 |
| 55 | SW_Push | Switch_Footprints:MX_lss_100U_doubleSided | SW0_0, SW0_1, SW0_2, SW0_3, SW0_4, SW0_5, SW0_6, SW0_7, SW0_8, SW0_9, SW0_10, SW1_0, SW1_1, SW1_2, SW1_3, SW1_10 +39 |
| 8 | MountingHole | Keyboard_Components:Throughhole_Standoff | H1, H2, H3, H4, H5, H6, H7, H8 |
| 6 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | WS2812B | Keyboard_Components:WS2812B_doublesided | LED1, LED2, LED3, LED4, LED5, LED6 |
| 2 | MCP23017_SP | Keyboard_Components:MCP23017_THTasSMD_Singlesided | U_left_1, U_right_1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP_LED_Ctrl_BypassUG1 |
| 1 | TRRRS_Connector | Keyboard_Components:TRRRS_NBA1-24-001 | TRRRS1 |

oceanKeebs/KeebPort
KeebPort, a split Keyboard architecture using a single micro controller as a central "port"

oceanKeebs/KeebPort
KeebPort, a split Keyboard architecture using a single micro controller as a central "port"

oceanKeebs/KeebPort
KeebPort, a split Keyboard architecture using a single micro controller as a central "port"



joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.


Taro-Hayashi/Handyman
ここの二つのキースイッチは足がPro Microと干渉するので短く切ります。 差し込んだ状態で短く切りましょう。 Choc V2の場合は3本の足を、Choc V1では2本の足と固定用品の一つを短くします。 全てのスイッチをはんだ付けします。



It measures 269.6 × 123.6 mm and has 2 copper layers, 1.6 mm thick.
189 parts, built around the SK6812MINI-E and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oceanKeebs/KeebPort repository on GitHub, at the commit this page was made from: the board is KiCAD/Projects/BaseSplitTemplate/Pcb/Ortho_BaseLayout.kicad_pcb and its schematic KiCAD/Projects/BaseSplitTemplate/Pcb/Ortho_BaseLayout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).