Skip to the content
2 layers38.1 × 69.3 mmDataDisplay, the printed circuit board in 3D

This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

Size
38.1 × 69.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
41
Pads
120
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
10 Jan 2020
Updated
19 Oct 2026

Overview

DataDisplay is an open-source printed circuit board by nunosousa, from the nunosousa/TelescopeMirrorTester repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.1 × 69.3 mm with 30 parts on 41 nets.

It is built around the ATMEGA328PB-AU, ST485EBDR and IRM-H638J7/TR2(CLW), with the RC0805FR-0710KL, LQM21FN100M80L and BC847C,215-JSM among its other parts. Its parts include 9 capacitors, 8 resistors, 3 ICs, 2 diodes and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

12

README

README.md

TelescopeMirrorTester

tbd

Parts

30
QtyValueFootprintReferences
510kRResistor_SMD:R_0805_2012MetricR2, R5, R6, R7, R8
3100nCCapacitor_SMD:C_0805_2012MetricC4, C7, C8
210uLInductor_SMD:L_0805_2012MetricL1, L2
213pCCapacitor_SMD:C_0805_2012MetricC1, C6
2BC847Package_TO_SOT_SMD:SOT-23Q1, Q2
10.1uCCapacitor_SMD:C_0805_2012MetricC2
1100kRResistor_SMD:R_0805_2012MetricR4
110uCCapacitor_SMD:CP_Elec_4x5.4C5
1160RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11kRResistor_SMD:R_0805_2012MetricR3
14.7uCCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9
14148Diode_SMD:D_SOD-123D2
14n7CCapacitor_SMD:C_0805_2012MetricC3
1ATmega328PB-APackage_QFP:TQFP-32_7x7mm_P0.8mmU2
1Conn_01x04Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ1
1IRM-H6XXOptoDevice_custom:IRM-H6XXU3
1LCDConnector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ2
1LEDLED_SMD:LED_0805_2012MetricD1
1ST485EPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1SW_PushButton_Switch_SMD:SW_Push_1P1T_XKB_TS-1187ASW1

More from nunosousa/TelescopeMirrorTester

12
  • 4 layers203.5 × 90 mmBDCMotorController, the printed circuit board in 3D

    BDCMotorController

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    323 partsMIT
  • 2 layers150 × 72 mmBDCMotorControlShieldMega, the printed circuit board in 3D

    BDCMotorControlShieldMega

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    279 partsMIT
  • 4 layers100 × 100 mmControllerBoard, the printed circuit board in 3D

    ControllerBoard

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    116 partsMIT
  • 4 layers68.6 × 53.3 mmBDCMotorControlShield, the printed circuit board in 3D

    BDCMotorControlShield

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    98 partsMIT
  • 4 layers110 × 37 mmBDCMotorControlBoard, the printed circuit board in 3D

    BDCMotorControlBoard

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    91 partsMIT
  • 4 layers50 × 25 mmRotationEncoder, the printed circuit board in 3D

    RotationEncoder

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    49 partsMIT
  • 2 layers40 × 50 mmLightSource, the printed circuit board in 3D

    LightSource

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    36 partsMIT
  • 4 layers34.6 × 53.3 mmDataShield, the printed circuit board in 3D

    DataShield

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    33 partsMIT
  • 2 layers100 × 44 mmPowerDeliveryBoard, the printed circuit board in 3D

    PowerDeliveryBoard

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    33 partsMIT
  • 2 layers30 × 30 mmLaserModule, the printed circuit board in 3D

    LaserModule

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    20 partsMIT
  • 4 layers34.6 × 53.3 mmDataShield, the printed circuit board in 3D

    DataShield

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    20 partsMIT
  • 2 layers40 × 50 mmLightSource, the printed circuit board in 3D

    LightSource

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    12 partsMIT

Similar boards

  • 4 layers104 × 64 mmFYDP, the printed circuit board in 3D

    FYDP

    mingzejin11/FYDP

    4B capstone project repository containing PCB design files

    259 parts
  • 6 layers63.5 × 38.5 mmP0004-PCB-001, the printed circuit board in 3D

    P0004-PCB-001

    M0WUT/p0004-pcb-001_lcd-board

    174 parts
  • 4 layers255 × 127 mmSCART switcher, the printed circuit board in 3D

    SCART switcher

    nunosousa/SCART-switcher

    An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

    613 parts
  • 4 layers125.7 × 76.5 mmUGC Main R4K, the printed circuit board in 3D

    UGC Main R4K

    HandHeldLegend/GC-Ultimate

    The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

    168 parts62
  • 4 layers125.7 × 65.9 mmUGC OpenMain, the printed circuit board in 3D

    UGC OpenMain

    HandHeldLegend/Open-GC-Ultimate

    Fully open, bare-bones GC Ultimate PCB made for makers and indies.

    117 parts3AGPL-3.0
  • 4 layers36 × 65 mmUwb beacon, the printed circuit board in 3D

    Uwb beacon

    dan-stefanov/locatof-hw

    Open-source localization project based on UWB Time-of-Flight ranging

    111 partsCERN-OHL-P-2.0
  • 4 layers59 × 101 mmEnku mainboard r0.1, the printed circuit board in 3D

    Enku mainboard r0.1

    aliaksei-lameyka/ENKU-Base-reader

    Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

    127 parts1CERN-OHL-W-2.0

Questions

How big is the DataDisplay PCB?

It measures 38.1 × 69.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DataDisplay use?

30 parts, built around the ATMEGA328PB-AU, ST485EBDR, IRM-H638J7/TR2(CLW) and RC0805FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DataDisplay KiCad files?

From the nunosousa/TelescopeMirrorTester repository on GitHub, at the commit this page was made from: the board is ECAD/DataDisplay/DataDisplay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the DataDisplay design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).