4 layers203.5 × 90 mm
BDCMotorController
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
323 partsMIT
2 layers30 × 30 mm
LaserModule
nunosousa/TelescopeMirrorTesterThis is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
- Size
- 30 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 13
- Pads
- 50
- Tracks, vias
- 118, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Jan 2020
- Updated
- 19 Oct 2026
Overview
LaserModule is an open-source printed circuit board by nunosousa, from the nunosousa/TelescopeMirrorTester repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 30 mm with 20 parts on 13 nets, routed with 118 tracks and 9 vias.
It is built around the ZXMP6A17GTA. Its parts include 5 resistors, 2 capacitors, 2 ICs, 1 transistor and 1 connector.
Main components
1README
README.mdTelescopeMirrorTester
tbd
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | 100pC | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 10kR | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 12R | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R1 |
| 1 | 1nC | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 20kR | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 30kR | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 4kR | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | AD8601 | Package_TO_SOT_SMD:TSOT-23-5 | U2 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
| 1 | MCP4716 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | SLD3134VL | OptoDevice_Custom:LaserDiode_TO18-D5.6-3 | LD1 |
| 1 | ZXMP6A17G | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
More from nunosousa/TelescopeMirrorTester
12- 2 layers150 × 72 mm
BDCMotorControlShieldMega
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
279 partsMIT - 4 layers100 × 100 mm
ControllerBoard
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
116 partsMIT - 4 layers68.6 × 53.3 mm
BDCMotorControlShield
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
98 partsMIT - 4 layers110 × 37 mm
BDCMotorControlBoard
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
91 partsMIT - 4 layers50 × 25 mm
RotationEncoder
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
49 partsMIT - 2 layers40 × 50 mm
LightSource
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
36 partsMIT - 4 layers34.6 × 53.3 mm
DataShield
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
33 partsMIT - 2 layers100 × 44 mm
PowerDeliveryBoard
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
33 partsMIT - 2 layers38.1 × 69.3 mm
DataDisplay
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
30 partsMIT - 4 layers34.6 × 53.3 mm
DataShield
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
20 partsMIT - 2 layers40 × 50 mm
LightSource
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
12 partsMIT
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the LaserModule PCB?
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LaserModule use?
20 parts, built around the ZXMP6A17GTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LaserModule KiCad files?
From the nunosousa/TelescopeMirrorTester repository on GitHub, at the commit this page was made from: the board is _Deprecated/ECAD/LaserModule/LaserModule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LaserModule design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).