

Split-40-final
Split 40% Bluetooth Keyboard
- Size
- 130.1 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 56
- Pads
- 462
- Tracks, vias
- 1,118, 44
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Oct 2023
- Updated
- 15 Oct 2023
Overview
Split-40-final is an open-source printed circuit board by nshie, from the nshie/CopyPaste repository on GitHub. It is a 2-layer board of 130.1 × 78 mm with 80 parts on 56 nets, routed with 1,118 tracks and 44 vias.
It is built around the WS2812B. Its parts include 6 capacitors, 6 diodes, 3 switches, 1 resistor and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdCopyPaste
Split 40% Bluetooth Keyboard
Motivation
I wanted a portable, light keyboard to bring to class, with stenography (chording) and bluetooth capabilities.
Design
- symmetrical design so both sides of the PCB can be soldered to get the left and right halves
- JLCPCB minimum order quantity is 5, so might as well use 2/5 instead of buying 2 different PCBs and using 2/10
- choc low profile switches for portability
- nice!nano for easy hand soldering (as opposed to soldering my own MCUs)
- thumb switches as close together as possible for chording
- rotary encoder for alt-tab on the left, volume on the right
- ports for oled display (not recommended because of battery drain)
- mounting holes for acrylic screen protector
- pads for ws2812b leds (not recommended because of battery drain)

Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | D | keyboard_parts:D_axial_silkless | D_A1, D_B1, D_C1, D_CAPS1, D_D1, D_E1, D_F1, D_G1, D_INNER1, D_OUTER1, D_Q1, D_R1, D_S1, D_SHIFT1, D_T1, D_TAB1 +6 |
| 22 | KEYSW | keyswitches:SW_PG1350_reversible_outlined_silkless | K_A1, K_B1, K_C1, K_CAPS1, K_D1, K_E1, K_F1, K_G1, K_INNER1, K_OUTER1, K_Q1, K_R1, K_S1, K_SHIFT1, K_T1, K_TAB1 +6 |
| 8 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP_B_GND1, JP_B_SCL1, JP_B_SDA1, JP_B_VCC1, JP_F_GND1, JP_F_SCL1, JP_F_SDA1, JP_F_VCC1 |
| 7 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | Hole1, Hole2, Hole3, Hole4, Hole5, Hole6, Hole7 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_Reversible | C1, C2, C3, C4, C5, C6 |
| 6 | WS2812B | WS2812B:WS2812B_data-bridgeable_Reversible | D1, D2, D3, D4, D5, D6 |
| 2 | , | ||
| 1 | 10k | Resistors_SMD:R_0805_2012Metric | R1 |
| 1 | Rotary_Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC12E_Vertical_H20mm | SW3 |
| 1 | SSD1306_OLED_Display | KiCad-SSD1306-0.91-OLED-4pin-128x32:SSD1306-0.91-OLED-4pin-128x32 | L1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | SW_SPDT | Button_Switch_THT:EG1206A_SPDT_Slide_Switch | SW2 |
| 1 | THT-pad | general:THT-pad | BATT |
| 1 | nice_nano | nice-nano-kicad:nice_nano | U1 |
More from nshie/CopyPaste
3- 2 layers130.2 × 78.1 mm

- 2 layers130.2 × 78.1 mm

- 2 layers

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm

- 2 layers95.3 × 161.9 mm

- 2 layers42.8 × 28.8 mm

MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm

- 2 layers285.5 × 95 mm

- 2 layers177.7 × 144.5 mm

Questions
How big is the Split-40-final PCB?
It measures 130.1 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Split-40-final use?
80 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Split-40-final KiCad files?
From the nshie/CopyPaste repository on GitHub, at the commit this page was made from: the board is Kicad/split-40-final.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Split-40-final design in my own project?
Its repository states no licence, so its author keeps all rights: ask nshie before reusing the design.