

Linea
A custom EMR tablet!
- Size
- 45 × 80 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 177
- Nets
- 205
- Pads
- 699
- Tracks, vias
- 1,725, 387
- Pours
- 381
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2025
- Updated
- 28 Aug 2026
Overview
Linea is an open-source printed circuit board by notaroomba, from the notaroomba/linea repository on GitHub. It is a 4-layer board of 45 × 80 mm with 177 parts on 205 nets, routed with 1,725 tracks and 387 vias.
It is built around the STM32WB55RGV6, MLPF-WB55-01E3 and COS8054TR, with the FAN48610BUC50X, 74HC4051 and RS3221-3.3YUTDN4 among its other parts. Its parts include 72 capacitors, 45 resistors, 14 ICs, 11 diodes and 7 inductors. It belongs with the STM32 boards of this library.
Main components
12STM32WB55RGV6
QFN-68-EP(8x8)-40℃~+105℃ -96dBm 1.71V~3.6V 2.402GHz~2.48GHz 2.4GHz 2Mbps 4.5mA 5.2mA 6dBm Bluetooth、802.15.4 SPI、USB、UART、ADC、I2C、JTAG、PDM transceiver QFN-68-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsRF Transceiver ICsMLPF-WB55-01E3
SMD-6P,1.6x1mm-40℃~+105℃ 1.1dB 2.4GHz~2.5GHz 50Ω Low Pass SMD-6P,1.6x1mm RF Filters ROHSSTMicroelectronicsRF FiltersCOS8054TR
TSSOP-14-2.25V~2.25V -40℃~+125℃ 100MHz 100mA 125dB 150V/us 1pA 2.5V~5.5V 2.5pA 2.6mA 2uV/℃ 4 5mV 8nV/√Hz@1kHz Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSCOSINEOperational AmplifierFAN48610BUC50X
WLCSP-9(1.2x1.2)-40℃~+85℃@(TA) 1 1.5A 2.5V~4.8V 2MHz~3MHz 5V 85uA Boost Boost Built-in Fixed Yes WLCSP-9(1.2x1.2) DC-DC Converters ROHSonsemiDC-DC Converters74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, MultiplexersRS3221-3.3YUTDN4
UTDFN-1x1-4-40℃~+85℃@(Ta) 1 160mV@(200mA) 1uA 200mA 3.3V 46dB@(217Hz) 7.5V Fixed Over Current Protection、Thermal Shutdown Positive UTDFN-1x1-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJiangsu RUNIC TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LV1T125DCKR-TP
SOT-353-40℃~+125℃ 1 1 1.6V~5.5V 1.6V~5.5V Level translator Power-off protection、Output enable high-impedance Tri-State Unidirectional SOT-353 Translators, Level Shifters ROHSTECH PUBLICTranslators, Level ShiftersUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)BAT54J
SOD-323F1 Independent 200mA 2uA@25V 30V 600mA 800mV@100mA SOD-323F Schottky Diodes ROHSNexperiaSchottky DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsPESD15VL1BA
SOD-323ESD And Surge Protection (TVS/ESD)FUXINSEMI1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
README
README.md
Linea
Project files for a custom EMR tablet from scratch.
Inspired by Project Patchouli.
Key Features • Case & CAD • PCB • BOM • Credits • License
Key Features
- ~500kHz scanning rate
- Large (170x110mm) drawing area
- Bluetooth support (via STM32)
- USB-C for data and charging
Pen(for another version)
Case and CAD
The case includes:
- 3D printed parts: a base and a top cover
- Snap-fit case
Designed in Fusion 360.
PCB
Designed in KiCad. Notable points:
- STM32WB55RGV6TR for bluetooth support
- LiPo battery charging circuit
- USB-C
- 2 ground planes
- FPC touchpad
The PCB has 2 components, the FPC coil grid and the main board.
FPC
Main Board
BOM
| Item | Price (USD) | Source |
|---|---|---|
| FPC Board | 48.67 | JLCPCB |
| Main Board | 207.14 | JLCPCB |
| Test Pen | 12.35 | Aliexpress |
| LiPo 1200mAh | 12.00 | Online Marketplace |
| Subtotal | 280.16 | |
| Shipping | 30.00 | Estimated |
| Total | 310.16 |
Credits
- Project Patchouli
- Flipper Zero
- Check
/referencesfor more information
This project uses:
You may also like...
- Niveles De Niveles – Real-time flood alert app
- ROCKETMEN – Custom flight controller files
- Tamaki – A cute HackPad
License
MIT
notaroomba.dev · GitHub @NotARoomba
Parts
177| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C6, C10, C11, C14, C48, C49, C50, C51, C52, C53, C74 |
| 11 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7, C9, C12, C22, C23, C24, C25, C56, C65, C66, C75 |
| 9 | 10uF | Capacitor_SMD:C_0402_1005Metric | C31, C44, C55, C59, C60, C61, C62, C70, C71 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R34, R36, R40, R41 |
| 7 | 120pF | Capacitor_SMD:C_0402_1005Metric | C29, C30, C32, C33, C35, C36, C72 |
| 7 | BAT54J | Diode_SMD:D_SOD-323F | D5, D6, D7, D8, D9, D10, D11 |
| 6 | 74HC4051 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U7, U8, U9, U10, U11, U12 |
| 5 | 100R | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4, FB5 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R15, R21, R25, R29, R50 |
| 4 | 12K | Resistor_SMD:R_0402_1005Metric | R17, R19, R22, R26 |
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C13, C15, C57, C69 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R27, R30, R35 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C63, C67, C68 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Conn_01x26_MountingPin | Connector_FFC-FPC:Hirose_FH12-26S-0.5SH_1x26-1MP_P0.50mm_Horizontal | J2, J3, J4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3 |
| 2 | 1.5 | Resistor_SMD:R_0402_1005Metric | R44, R45 |
| 2 | 1.5K | Resistor_SMD:R_0402_1005Metric | R31, R32 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R48, R49 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C40, C41 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R12, R16 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R14, R23 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C37, C38 |
| 2 | 3.3 | Resistor_SMD:R_0402_1005Metric | R46, R47 |
| 2 | 3.6nF | Capacitor_SMD:C_0603_1608Metric | C17, C27 |
| 2 | 3.9nF | Capacitor_SMD:C_0402_1005Metric | C16, C19 |
| 2 | 400 | Resistor_SMD:R_0402_1005Metric | R13, R51 |
| 2 | 470nH | Inductor_SMD:L_0603_1608Metric | L5, L6 |
| 2 | 470pF | Capacitor_SMD:C_0402_1005Metric | C28, C43 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 68nF | Capacitor_SMD:C_0402_1005Metric | C18, C73 |
| 2 | PESD15VL1BA | PCM_Diode_SMD_AKL:D_SOD-323_TVS | D3, D4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 0.3pF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 0.8pF | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 15k | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-523 | D1 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 1uH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C42 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C45 |
| 1 | 2450AT18A100E | linea:ANT-SMD_L3.2-W1.6 | AE1 |
| 1 | 30.1K | Resistor_SMD:R_0402_1005Metric | R38 |
| 1 | 33pF | Capacitor_SMD:C_0402_1005Metric | C39 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 4.7pF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C64 |
| 1 | 470nH | Inductor_SMD:L_Murata_DFE201610P | L9 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C58 |
| 1 | 5.23K | Resistor_SMD:R_0402_1005Metric | R39 |
| 1 | 560 | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 560pF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 60R / Short | Inductor_SMD:L_0603_1608Metric | L7 |
| 1 | BAT54SW | Package_TO_SOT_SMD:SOT-323_SC-70 | D12 |
| 1 | COS8054TR | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | Conn_01x03 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J5 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | EXC14CE900U | linea:FILTER-SMD_4P-L0.9-W0.7-P0.50-BL | L8 |
| 1 | FAN48610BUC50X | linea:WLCSP-9_L1.2-W1.2-R3-C3-P0.40-BL | U15 |
| 1 | FC-12M32.768KHZ7PF20PPM | linea:FC-12M_L2.0-W1.2 | X2 |
| 1 | MLPF-WB55-01E3 | linea:FILTER-SMD_6P-L1.6-W1.0-P0.50-BL | FL2 |
| 1 | RS3221-3.3YUTDN4 | linea:UTDFN-4_L1.0-W1.0-P0.63-BL-EP-1 | U16 |
| 1 | SKRTLAE010 | linea:KEY-SMD_SKRTLAE010 | SW3 |
| 1 | SN74LV1T125DCKR | linea:SC-70-5_L2.1-W1.3-P0.65-LS2.1-TL | U13 |
| 1 | STM32WB55RGV6 | Package_DFN_QFN:QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm | U1 |
| 1 | TYPE-C 16PIN 2MD(073) | linea:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U14 |
| 1 | WW25WR010FTL | linea:R2512 | R42 |
| 1 | XL7EL89CKI-111YLC-32M | linea:CRYSTAL-SMD_4P-L2.0-W1.6-BL | X1 |
| 1 | ~ | linea:DSBGA-9_L1.7-W1.6-R3-C3-P0.50-BL | U4 |
| 1 | ~ | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | ~ | linea:QFN-24_L4.0-W4.0-P0.50-TL-EP2.7 | U2 |
| 1 | ~ | linea:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q6 |
| 1 | ~ | linea:SOT-363_L2.0-W1.3-P0.65-LS2.1-BL | Q5 |
| 1 | ~ | linea:SOT-523-3_L1.6-W0.8-P1.00-LS1.6-BR | Q4 |
The 176 most common of 177 parts.
More from notaroomba/linea
1- 2 layers194.3 × 134.1 mm

Similar boards
- 4 layers150 × 50 mm

- 4 layers100 × 30 mm

Nrst tracks only
vexpaer/vexpaers_heart
Open-source Holter ECG recorder hardware: ADS1294R, STM32WB55, microSD, BLE and USB-Pogo dock
167 partsCERN-OHL-S-2.0 - 2 layers58 × 58 mm

- 4 layers66 × 25.4 mm

- 2 layers62 × 208.5 mm

Combined
wr/airwriter
Print to vintage Apple printers from modern devices over AirPrint, or from a vintage Mac over AppleTalk.
154 parts7 - 4 layers118 × 100 mm

- 4 layers51 × 44 mm

- 4 layers67.2 × 58.2 mm

Questions
How big is the Linea PCB?
It measures 45 × 80 mm and has 4 copper layers, 1 mm thick.
What parts does the Linea use?
177 parts, built around the STM32WB55RGV6, MLPF-WB55-01E3, COS8054TR and FAN48610BUC50X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Linea KiCad files?
From the notaroomba/linea repository on GitHub, at the commit this page was made from: the board is hardware/board/board.kicad_pcb and its schematic hardware/board/analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Linea design in my own project?
Its repository states no licence, so its author keeps all rights: ask notaroomba before reusing the design.