
STM32WB55RGV6
STMicroelectronicsExtended
-40℃~+105℃ -96dBm 1.71V~3.6V 2.402GHz~2.48GHz 2.4GHz 2Mbps 4.5mA 5.2mA 6dBm Bluetooth、802.15.4 SPI、USB、UART、ADC、I2C、JTAG、PDM transceiver QFN-68-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32WB55RGV6
- Category
- RF Transceiver ICs
- Package
- QFN-68-EP(8x8)
- Pins
- 69
- In stock
- 53 at JLCPCB (C401505)
- Used on
- 6 open-source boards
Overview
The STM32WB55RGV6 is a RF Transceiver IC made by STMicroelectronics in a QFN-68-EP(8x8) package with 69 pins. -40℃~+105℃ -96dBm 1.71V~3.6V 2.402GHz~2.48GHz 2.4GHz 2Mbps 4.5mA 5.2mA 6dBm Bluetooth、802.15.4 SPI、USB、UART、ADC、I2C、JTAG、PDM transceiver QFN-68-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32WB:STM32WB55RGVx, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm, from KiCad's library), ready for a KiCad board. 53 are in stock at JLCPCB (part C401505). 6 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
20- Supply, least
- 1.71 V · VDD, recommended operating min · p. 76
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 76
- Supply, absolute maximum
- 4 V · VDDX, external main supply absolute max · p. 74
- Supply, least
- 1.62 V · VDDA, ADC or COMP used, recommended operating min · p. 76
- Supply, least
- 2.4 V · VDDA, VREFBUF used, recommended operating min · p. 76
- Supply, least
- 1.55 V · VBAT, recommended operating min · p. 76
- Supply, least
- 3 V · VDDUSB, USB used, recommended operating min · p. 77
- Works up to
- 85 °C · suffix 6, maximum power dissipation, ambient max · p. 77
- Works up to
- 105 °C · suffix 6, low-power dissipation subject to TJmax, ambient max · p. 77
- Junction, hottest
- 105 °C · suffix 6, operating junction temperature max · p. 77
- Junction, hottest
- 130 °C · absolute maximum junction temperature · p. 75
- Takes working
- 5 mA · typical MCU Run at 64 MHz, SMPS on, 25 °C, VDD = 3.3 V, peripherals disabled · p. 89
- Takes working
- 4.5 mA · typical BLE receive, SMPS on, VFBSMPS = 1.4 V, VDD = 3.3 V · p. 82
- Takes at most
- 12.7 mA · typical BLE transmit at maximum output power, SMPS bypass, VDD = 3.3 V · p. 82
- Takes asleep
- 13 nA · typical Shutdown, RTC disabled, backup registers retained, VDD = 1.8 V, 25 °C · p. 101
- A pin gives at most
- 20 mA · absolute max current sunk by any I/O and control pin except FT_f · p. 75
- Junction to air (VFQFPN68 - 8 mm x 8 mm)
- 47 K/W · junction-to-ambient thermal resistance · p. 164
- Data rate, most
- 2 Mbit/s · BLE on-air data rate max · p. 77
- Takes asleep
- 370 nA · IDD, Standby, RTC disabled, BLE disabled, no independent watchdog, VDD = 3.0 V, 25 °C, typical · p. 99
- Takes asleep
- 37 nA · IDD, Shutdown, backup registers retained, RTC disabled, VDD = 3.0 V, 25 °C, typical · p. 101
What it is and has
23- Radio frequency
- 2.4 GHz · p. 1
- Radio protocols
- Bluetooth 5, IEEE 802.15.4-2011 PHY and MAC, Thread, ZigBee 3.0 · p. 1
- Maximum programmable RF output power
- +6 dBm · p. 1
- RF output power step
- 1 dB · p. 1
- Balun
- Integrated · p. 1
- Radio data rate
- 2 Mbps supported · p. 1
- Radio processor
- Dedicated Arm 32-bit Cortex M0+ for real-time radio layer · p. 1
- Core
- Arm 32-bit Cortex-M4 with FPU · p. 1
- Maximum CPU frequency
- 64 MHz · p. 1
- Core capabilities
- MPU, 80 DMIPS, DSP instructions · p. 1
- 802.15.4 MAC
- Dedicated hardware MAC · p. 23
- 802.15.4 RX FIFO
- 256 bytes; up to 8 frames · p. 23
- 802.15.4 TX FIFO
- 128 bytes with retention · p. 23
- 802.15.4 acknowledgment
- Automatic frame acknowledgment with programmable delay · p. 23
- 802.15.4 channel access
- Full CSMA-CA support · p. 23
- Power modes
- Eight low-power modes · p. 28
- Brown-out reset
- Integrated; active in all modes except Shutdown · p. 28
- USB clock
- 48 MHz internal RC oscillator for crystal-less USB · p. 38
- Core
- 32-bit Arm Cortex-M4 with FPU · p. 1
- Wireless connectivity
- Bluetooth 5 and 802.15.4 radio solution · p. 1
- Integrated balun
- Integrated balun to reduce BOM · p. 1
- SMPS
- High efficiency embedded SMPS · p. 1
- RF output power
- Programmable up to +6 dBm · p. 1
Specifications
331| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDDX - VSS | including VDD, VDDA, VDDUSB, VLCD, VDDRF, VDDSMPS, VBAT; absolute maximum ratings | min -0.3 · max 4 V | 74 |
| Input voltage on TT_xx pins VIN | absolute maximum; minimum VSS-0.3 | max 4 V | 74 |
| Input voltage on any other pin VIN | absolute maximum; minimum VSS-0.3 | max 4 V | 74 |
| Variations between different VDDX power pins of the same domain |∆VDDx| | absolute maximum ratings | max 50 mV | 75 |
| Variations between all the different ground pins |VSSx-VSS| | absolute maximum ratings; includes VREF- pin | max 50 mV | 75 |
| Total current into sum of all VDD power lines (source) ∑IVDD | absolute maximum ratings | max 130 mA | 75 |
| Total current out of sum of all VSS ground lines (sink) ∑IVSS | absolute maximum ratings | max 130 mA | 75 |
| Maximum current into each VDD power pin (source) IVDD(PIN) | absolute maximum ratings | max 100 mA | 75 |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | absolute maximum ratings | max 100 mA | 75 |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | absolute maximum ratings | max 20 mA | 75 |
| Output current sunk by any FT_f pin IIO(PIN) | absolute maximum ratings | max 20 mA | 75 |
| Output current sourced by any I/O and control pin IIO(PIN) | absolute maximum ratings | max 20 mA | 75 |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | absolute maximum ratings; footnote 2 | max 100 mA | 75 |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | absolute maximum ratings; footnote 2 | max 100 mA | 75 |
| Injected current on FT_xxx, TT_xx, RST and B pins, except PB0 and PB1 IINJ(PIN) | absolute maximum ratings; negative injection limit | max -5 mA | 75 |
| Injected current on FT_xxx, TT_xx, RST and B pins, except PB0 and PB1 IINJ(PIN) | absolute maximum ratings; positive injection limit | max 0 mA | 75 |
| Injected current on PB0 and PB1 IINJ(PIN) | absolute maximum ratings; negative injection limit | max -5 mA | 75 |
| Injected current on PB0 and PB1 IINJ(PIN) | absolute maximum ratings; positive injection limit | max 0 mA | 75 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | absolute sum of negative injected currents; instantaneous values | max 25 mA | 75 |
| Storage temperature range TSTG | absolute maximum ratings | min -65 · max 150 °C | 75 |
| Maximum junction temperature TJ | absolute maximum ratings | max 130 °C | 75 |
| Core current consumption ICORE | VBAT = 1.8 V, VDD = 0 V | typ 0.002 uA | 76 |
| Core current consumption ICORE | Shutdown; VDD = 1.8 V | typ 0.013 uA | 76 |
| Core current consumption ICORE | Standby; VDD = 1.8 V; 32 KB RAM retention | typ 0.32 uA | 76 |
| Core current consumption ICORE | Stop2 | typ 1.85 uA | 76 |
| Core current consumption ICORE | Sleep; 16 MHz | typ 740 uA | 76 |
| Core current consumption ICORE | LP run; 2 MHz | typ 320 uA | 76 |
| Core current consumption ICORE | Run; 64 MHz | typ 5000 uA | 76 |
| Peripheral current consumption IPERI | BLE; Radio RX | typ 4500 uA | 76 |
| Peripheral current consumption IPERI | BLE; Radio TX 0 dBm output power | typ 5200 uA | 76 |
| Peripheral current consumption IPERI | BLE advertising; Tx = 0 dBm; period 1.28 s; 31 Bytes; 3 channels | typ 13 uA | 76 |
| Peripheral current consumption IPERI | BLE advertising; Tx = 0 dBm; 6 Bytes; period 300 ms; 3 channels | typ 32 uA | 76 |
| Peripheral current consumption IPERI | LP timers | typ 6 uA | 76 |
| Peripheral current consumption IPERI | LPUART | typ 7.7 uA | 76 |
| Peripheral current consumption IPERI | RTC | typ 2.5 uA | 76 |
| Internal AHB clock frequency fHCLK | min 0 · max 64 MHz | 76 | |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 64 MHz | 76 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 64 MHz | 76 | |
| Standard operating voltage VDD | When RESET is released functionality is guaranteed down to VBOR0 Min. | min 1.71 · max 3.6 V | 76 |
| Analog supply voltage VDDA | ADC or COMP used; shared maximum 3.6 V | min 1.62 V | 76 |
| Analog supply voltage VDDA | VREFBUF used; shared maximum 3.6 V | min 2.4 V | 76 |
| Analog supply voltage VDDA | shared maximum for all listed conditions | max 3.6 V | 76 |
| Backup operating voltage VBAT | min 1.55 · max 3.6 V | 76 | |
| SMPS Feedback voltage VFBSMPS | min 1.4 · max 3.6 V | 77 | |
| Minimum RF voltage VDDRF | min 1.71 · max 3.6 V | 77 | |
| USB supply voltage VDDUSB | USB used | min 3 · max 3.6 V | 77 |
| USB supply voltage VDDUSB | USB not used | min 0 · max 3.6 V | 77 |
| I/O input voltage VIN | TT_xx I/O; maximum VDD + 0.3 V | min -0.3 V | 77 |
| I/O input voltage VIN | All I/O except TT_xx; maximum min (min (VDD, VDDA, VDDUSB, VLCD) + 3.6 V, 5.5 V); footnotes 2 and 3 | min -0.3 V | 77 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation; shared minimum −40 °C | max 85 °C | 77 |
| Ambient temperature for the suffix 6 version TA | Low-power dissipation; shared minimum −40 °C; TJ must not exceed TJmax | max 105 °C | 77 |
| Junction temperature range TJ | Suffix 6 version; shared minimum −40 °C | max 105 °C | 77 |
| Frequency operating range Fop | 1 Mbps unless otherwise specified | min 2402 · max 2480 MHz | 77 |
| Crystal frequency Fxtal | 1 Mbps unless otherwise specified | typ 32 MHz | 77 |
| Delta frequency ∆F | 1 Mbps unless otherwise specified | typ 250 KHz | 77 |
| On Air data rate Rgfsk | typ 1 · max 2 Mbps | 77 | |
| RF channel spacing PLLres | 1 Mbps unless otherwise specified | typ 2 MHz | 77 |
| Intermodulation P_IMD | |f2-f1| = 6 MHz; Bluetooth® Low Energy: -50 dBm; ideal TX | typ -29 dBm | 82 |
| Intermodulation P_IMD | |f2-f1| = 8 MHz; Bluetooth® Low Energy: -50 dBm; ideal TX | typ -30 dBm | 82 |
| Intermodulation P_IMD | |f2-f1| = 10 MHz; Bluetooth® Low Energy: -50 dBm; ideal TX | typ -29 dBm | 82 |
| Out of band blocking P_OBB | 30 to 2000 MHz; Bluetooth® Low Energy: -30 dBm; ideal TX | typ -3 dBm | 82 |
| Out of band blocking P_OBB | 2003 to 2399 MHz; Bluetooth® Low Energy: -35 dBm; ideal TX | typ -9 dBm | 82 |
| Out of band blocking P_OBB | 2484 to 2997 MHz; Bluetooth® Low Energy: -35 dBm; ideal TX | typ -3 dBm | 82 |
| TX maximum output power consumption (SMPS Bypass) Itxmax | VDD = 3.3 V | typ 12.7 mA | 82 |
| TX maximum output power consumption (SMPS On, VFBSMPS = 1.7 V) Itxmax | VDD = 3.3 V | typ 7.8 mA | 82 |
| TX 0 dBm output power consumption (SMPS Bypass) Itx0dbm | VDD = 3.3 V | typ 8.8 mA | 82 |
| TX 0 dBm output power consumption (SMPS On, VFBSMPS = 1.4 V) Itx0dbm | VDD = 3.3 V | typ 5.2 mA | 82 |
| Rx consumption (SMPS Bypass) Irxlo | VDD = 3.3 V | typ 7.9 mA | 82 |
| Rx consumption (SMPS On, VFBSMPS = 1.4 V) Irxlo | VDD = 3.3 V | typ 4.5 mA | 82 |
| Frequency operating range Fop | min 2405 · max 2480 MHz | 82 | |
| Crystal frequency Fxtal | typ 32 MHz | 82 | |
| Delta frequency ∆F | typ 5 MHz | 82 | |
| On Air data rate Roqpsk | typ 250 Kbps | 82 | |
| RF channel spacing PLLres | typ 5 MHz | 82 | |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz; 25 °C; all peripherals disabled; HSI16 | typ 1.9 · max 2.4 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz; 55 °C; all peripherals disabled; HSI16 | typ 1.9 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz; 85 °C; all peripherals disabled; HSI16 | typ 2 · max 2.52 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz; 105 °C; all peripherals disabled; HSI16 | typ 2.2 · max 2.96 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 2 MHz; 25 °C; all peripherals disabled; HSI16 | typ 0.96 · max 1.25 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 2 MHz; 55 °C; all peripherals disabled; HSI16 | typ 0.985 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 2 MHz; 85 °C; all peripherals disabled; HSI16 | typ 1.1 · max 1.57 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 2; 2 MHz; 105 °C; all peripherals disabled; HSI16 | typ 1.25 · max 2.05 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz; 25 °C; all peripherals disabled; HSI16 + PLL ON | typ 8.15 · max 9.3 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz; 55 °C; all peripherals disabled; HSI16 + PLL ON | typ 8.25 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz; 85 °C; all peripherals disabled; HSI16 + PLL ON | typ 8.4 · max 9.6 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz; 105 °C; all peripherals disabled; HSI16 + PLL ON | typ 8.6 · max 10.02 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 32 MHz; 25 °C; all peripherals disabled; HSE | typ 4.2 · max 4.25 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 32 MHz; 55 °C; all peripherals disabled; HSE | typ 4.25 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 32 MHz; 85 °C; all peripherals disabled; HSE | typ 4.4 · max 4.63 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 32 MHz; 105 °C; all peripherals disabled; HSE | typ 4.65 · max 5.17 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 16 MHz; 25 °C; all peripherals disabled; HSI16 | typ 2.25 · max 2.65 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 16 MHz; 55 °C; all peripherals disabled; HSI16 | typ 2.3 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 16 MHz; 85 °C; all peripherals disabled; HSI16 | typ 2.4 · max 2.91 mA | 89 |
| Supply current in Run mode IDD(Run) | Range 1; 16 MHz; 105 °C; all peripherals disabled; HSI16 | typ 2.65 · max 3.52 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 64 MHz; 25 °C; all peripherals disabled | typ 5 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 64 MHz; 55 °C; all peripherals disabled | typ 5 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 64 MHz; 85 °C; all peripherals disabled | typ 5.1 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 64 MHz; 105 °C; all peripherals disabled | typ 5.2 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 32 MHz; 25 °C; all peripherals disabled | typ 3.15 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 32 MHz; 55 °C; all peripherals disabled | typ 3.15 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 32 MHz; 85 °C; all peripherals disabled | typ 3.25 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 32 MHz; 105 °C; all peripherals disabled | typ 3.35 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 16 MHz; 25 °C; all peripherals disabled | typ 2.3 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 16 MHz; 55 °C; all peripherals disabled | typ 2.3 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 16 MHz; 85 °C; all peripherals disabled | typ 2.35 mA | 89 |
| Supply current in Run mode IDD(Run) | SMPS; Range 1; 16 MHz; 105 °C; all peripherals disabled | typ 2.45 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 2 MHz; 25 °C | typ 0.335 · max 0.48 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 2 MHz; 55 °C | typ 0.36 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 2 MHz; 85 °C | typ 0.47 · max 0.91 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 2 MHz; 105 °C | typ 0.67 · max 1.47 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 1 MHz; 25 °C | typ 0.17 · max 0.27 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 1 MHz; 55 °C | typ 0.21 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 1 MHz; 85 °C | typ 0.325 · max 0.73 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 1 MHz; 105 °C | typ 0.52 · max 1.31 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 400 kHz; 25 °C | typ 0.0815 · max 0.14 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 400 kHz; 55 °C | typ 0.12 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 400 kHz; 85 °C | typ 0.23 · max 0.59 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 400 kHz; 105 °C | typ 0.425 · max 1.18 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 100 kHz; 25 °C | typ 0.0415 · max 0.07 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 100 kHz; 55 °C | typ 0.076 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 100 kHz; 85 °C | typ 0.19 · max 0.55 mA | 89 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI; all peripherals disabled; 100 kHz; 105 °C | typ 0.385 · max 1.14 mA | 89 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD disabled; BLE disabled; VDD = 1.8 V; 25 °C | typ 1.85 · max 4.12 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD disabled; BLE disabled; VDD = 2.4 V; 25 °C | typ 1.85 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD disabled; BLE disabled; VDD = 3.0 V; 25 °C | typ 1.85 · max 4.17 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD disabled; BLE disabled; VDD = 3.6 V; 25 °C | typ 1.95 · max 4.4 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD enabled and clocked by LSI; BLE disabled; VDD = 1.8 V; 25 °C | typ 2 · max 4.3 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD enabled and clocked by LSI; BLE disabled; VDD = 2.4 V; 25 °C | typ 2 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD enabled and clocked by LSI; BLE disabled; VDD = 3.0 V; 25 °C | typ 2.1 · max 4.41 uA | 94 |
| Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) | LCD enabled and clocked by LSI; BLE disabled; VDD = 3.6 V; 25 °C | typ 2.15 · max 4.66 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD disabled; VDD = 1.8 V; 25 °C | typ 2.1 · max 4.5 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD disabled; VDD = 2.4 V; 25 °C | typ 2.25 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD disabled; VDD = 3.0 V; 25 °C | typ 2.3 · max 4.64 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD disabled; VDD = 3.6 V; 25 °C | typ 2.5 · max 5.12 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD enabled; VDD = 1.8 V; 25 °C | typ 2.2 · max 4.57 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD enabled; VDD = 2.4 V; 25 °C | typ 2.35 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD enabled; VDD = 3.0 V; 25 °C | typ 2.45 · max 4.87 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSI; LCD enabled; VDD = 3.6 V; 25 °C | typ 2.6 · max 5.11 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25 °C | typ 2.2 · max 4.29 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °C | typ 2.25 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 25 °C | typ 2.45 · max 4.31 uA | 94 |
| Supply current in Stop 2 mode, RTC enabled, BLE disabled IDD(Stop 2 with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °C | typ 2.55 · max 4.4 uA | 94 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; no independent watchdog; VDD = 1.8 V; 25 °C | typ 0.32 · max 0.828 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; no independent watchdog; VDD = 2.4 V; 25 °C | typ 0.35 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; no independent watchdog; VDD = 3.6 V; 25 °C | typ 0.41 · max 1.04 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; with independent watchdog; VDD = 1.8 V; 25 °C | typ 0.525 · max 1.095 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; with independent watchdog; VDD = 2.4 V; 25 °C | typ 0.595 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; with independent watchdog; VDD = 3.0 V; 25 °C | typ 0.67 · max 1.253 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD(Standby) | BLE disabled; with independent watchdog; VDD = 3.6 V; 25 °C | typ 0.77 · max 1.356 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 25 °C | typ 0.6 · max 1.165 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 25 °C | typ 0.705 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 25 °C | typ 0.825 · max 1.463 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.6 V; 25 °C | typ 0.97 · max 1.628 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 25 °C | typ 0.655 · max 1.196 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 25 °C | typ 0.79 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 25 °C | typ 0.915 · max 1.573 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 25 °C | typ 1.05 · max 1.723 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25 °C | typ 0.625 · max 1.061 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °C | typ 0.755 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 25 °C | typ 0.88 · max 1.1 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD(Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °C | typ 1.05 · max 1.171 uA | 99 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V; 25 °C | typ 0.013 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V; 25 °C | typ 0.014 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V; 25 °C | typ 0.037 · max 0.185 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V; 25 °C | typ 0.093 · max 0.247 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25 °C | typ 0.315 · max 0.572 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °C | typ 0.405 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 25 °C | typ 0.535 · max 0.664 uA | 101 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °C | typ 0.72 · max 0.79 uA | 101 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 25 °C | typ 2 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 25 °C | typ 2 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 25 °C | typ 4 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 25 °C | typ 15 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 1.8 V; 25 °C | typ 305 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 25 °C | typ 395 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 25 °C | typ 505 nA | 101 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 25 °C | typ 645 nA | 101 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C; ANSI/ESDA/JEDEC JS-001; Class 2; guaranteed by characterization | max 2000 V | 120 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C; ANSI/ESD STM5.3.1 JS-002; Class C2a; guaranteed by characterization | max 500 V | 120 |
| Thermal resistance junction-ambient ΘJA | VFQFPN68 - 8 mm x 8 mm | typ 47 °C/W | 164 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | BLE disabled; no independent watchdog; VDD = 3.0 V; 25 °C | typ 0.37 · max 0.945 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | BLE disabled; no independent watchdog; VDD = 3.6 V; 25 °C | typ 0.41 · max 1.04 uA | 99 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled BLE disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 25 °C | typ 0.88 · max 1.1 uA | 99 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 25 °C | typ 0.21 uA | 100 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 25 °C | typ 0.245 uA | 100 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 25 °C | typ 0.25 uA | 100 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 25 °C | typ 0.235 uA | 100 |
| Supply current during wakeup from Standby mode IDD (wakeup from Standby) | Wakeup clock HSI16; SMPS OFF; VDD = 3.0 V; 25 °C; code execution from Flash memory | typ 1.73 mA | 100 |
| Bus Matrix | AHB1; Range 1 | typ 2.4 uA/MHz | 104 |
| Bus Matrix | AHB1; Range 2 | typ 2 uA/MHz | 104 |
| Bus Matrix | AHB1; Low-power run and sleep | typ 1.8 uA/MHz | 104 |
| TSC | AHB1; Range 1 | typ 1.25 uA/MHz | 104 |
| TSC | AHB1; Range 2 | typ 1.05 uA/MHz | 104 |
| TSC | AHB1; Low-power run and sleep | typ 1.05 uA/MHz | 104 |
| CRC | AHB1; Range 1 | typ 0.465 uA/MHz | 104 |
| CRC | AHB1; Range 2 | typ 0.375 uA/MHz | 104 |
| CRC | AHB1; Low-power run and sleep | typ 0.38 uA/MHz | 104 |
| DMA1 | AHB1; Range 1 | typ 1.9 uA/MHz | 104 |
| DMA1 | AHB1; Range 2 | typ 1.55 uA/MHz | 104 |
| DMA1 | AHB1; Low-power run and sleep | typ 1.8 uA/MHz | 104 |
| DMA2 | AHB1; Range 1 | typ 2 uA/MHz | 104 |
| DMA2 | AHB1; Range 2 | typ 1.65 uA/MHz | 104 |
| DMA2 | AHB1; Low-power run and sleep | typ 1.8 uA/MHz | 104 |
| DMAMUX | AHB1; Range 1 | typ 4.15 uA/MHz | 104 |
| DMAMUX | AHB1; Range 2 | typ 3.4 uA/MHz | 104 |
| DMAMUX | AHB1; Low-power run and sleep | typ 4.45 uA/MHz | 104 |
| All AHB1 Peripherals | Range 1 | typ 12 uA/MHz | 104 |
| All AHB1 Peripherals | Range 2 | typ 10 uA/MHz | 104 |
| All AHB1 Peripherals | Low-power run and sleep | typ 11.5 uA/MHz | 104 |
| AES1 | AHB2; Range 1 | typ 4 uA/MHz | 104 |
| AES1 | AHB2; Range 2 | typ 3.3 uA/MHz | 104 |
| AES1 | AHB2; Low-power run and sleep | typ 3.9 uA/MHz | 104 |
| ADC independent clock domain | AHB2; Range 1 | typ 2.55 uA/MHz | 104 |
| ADC independent clock domain | AHB2; Range 2 | typ 2.1 uA/MHz | 104 |
| ADC independent clock domain | AHB2; Low-power run and sleep | typ 2.1 uA/MHz | 104 |
| ADC clock domain | AHB2; Range 1 | typ 2.25 uA/MHz | 104 |
| ADC clock domain | AHB2; Range 2 | typ 1.9 uA/MHz | 104 |
| ADC clock domain | AHB2; Low-power run and sleep | typ 1.9 uA/MHz | 104 |
| All AHB2 Peripherals | Range 1 | typ 7.45 uA/MHz | 104 |
| All AHB2 Peripherals | Range 2 | typ 6.2 uA/MHz | 104 |
| All AHB2 Peripherals | Low-power run and sleep | typ 6.6 uA/MHz | 104 |
| QSPI | AHB3; Range 1 | typ 7.6 uA/MHz | 104 |
| QSPI | AHB3; Range 2 | typ 6.25 uA/MHz | 104 |
| QSPI | AHB3; Low-power run and sleep | typ 7.1 uA/MHz | 104 |
| TRNG independent clock domain | AHB Shared; Range 1; Range 2 and Low-power run and sleep: N/A | typ 3.8 uA/MHz | 104 |
| TRNG clock domain | AHB Shared; Range 1; Range 2 and Low-power run and sleep: N/A | typ 2 uA/MHz | 104 |
| SRAM2 | AHB Shared; Range 1 | typ 0.17 uA/MHz | 104 |
| SRAM2 | AHB Shared; Range 2 | typ 0.135 uA/MHz | 104 |
| SRAM2 | AHB Shared; Low-power run and sleep | typ 0.135 uA/MHz | 104 |
| FLASH | AHB Shared; Range 1 | typ 8.35 uA/MHz | 104 |
| FLASH | AHB Shared; Range 2 | typ 6.9 uA/MHz | 104 |
| FLASH | AHB Shared; Low-power run and sleep | typ 8.45 uA/MHz | 104 |
| AES2 | AHB Shared; Range 1 | typ 6.95 uA/MHz | 104 |
| AES2 | AHB Shared; Range 2 | typ 5.75 uA/MHz | 104 |
| AES2 | AHB Shared; Low-power run and sleep | typ 7 uA/MHz | 104 |
| PKA | AHB Shared; Range 1 | typ 4.4 uA/MHz | 104 |
| PKA | AHB Shared; Range 2 | typ 3.65 uA/MHz | 104 |
| PKA | AHB Shared; Low-power run and sleep | typ 4.25 uA/MHz | 104 |
| All AHB Shared Peripherals | Range 1 | typ 17.5 uA/MHz | 104 |
| All AHB Shared Peripherals | Range 2 | typ 14.5 uA/MHz | 104 |
| All AHB Shared Peripherals | Low-power run and sleep | typ 16 uA/MHz | 104 |
| Wakeup time from Sleep mode to Run mode tWUSLEEP | - | typ 9 · max 10 No. of CPU cycles | 106 |
| Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEP | Wakeup in Flash with memory in power-down during low-power sleep mode; FPDS = 1 in PWR_CR1; MSI = 2 MHz | typ 9 · max 10 No. of CPU cycles | 106 |
| Wake up time from Stop 0 mode to Run mode in Flash memory tWUSTOP0 | Range 1; Wakeup clock MSI = 32 MHz | typ 2.38 · max 2.96 us | 106 |
| Wake up time from Stop 0 mode to Run mode in Flash memory tWUSTOP0 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 1.69 · max 2 us | 106 |
| Wake up time from Stop 0 mode to Run mode in Flash memory tWUSTOP0 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 1.7 · max 2.01 us | 106 |
| Wake up time from Stop 0 mode to Run mode in Flash memory tWUSTOP0 | Range 2; Wakeup clock MSI = 4 MHz | typ 7.43 · max 8.59 us | 106 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; Wakeup clock MSI = 32 MHz | typ 2.63 · max 3 us | 106 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 1.8 · max 2 us | 106 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 1.82 · max 2.02 us | 106 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; Wakeup clock MSI = 4 MHz | typ 7.58 · max 8.7 us | 106 |
| Wake up time from Stop 1 mode to Run in Flash memory SMPS bypassed tWUSTOP1 | Range 1; Wakeup clock MSI = 32 MHz | typ 4.67 · max 5.56 us | 106 |
| Wake up time from Stop 1 mode to Run in Flash memory SMPS bypassed tWUSTOP1 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 5.09 · max 6.03 us | 106 |
| Wake up time from Stop 1 mode to Run in Flash memory SMPS bypassed tWUSTOP1 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 5.08 · max 6 us | 106 |
| Wake up time from Stop 1 mode to Run in Flash memory SMPS bypassed tWUSTOP1 | Range 2; Wakeup clock MSI = 4 MHz | typ 8.36 · max 9.28 us | 106 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 1; Wakeup clock MSI = 32 MHz | typ 4.88 · max 5.55 us | 106 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 5.29 · max 5.95 us | 106 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 5.28 · max 5.96 us | 106 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 2; Wakeup clock MSI = 4 MHz | typ 8.49 · max 9.3 us | 106 |
| Wake up time from Stop 1 mode to Low-power run mode in Flash memory tWUSTOP1 | Regulator in Low-power mode; LPR = 1 in PWR_CR1; Wakeup clock MSI = 4 MHz | typ 7.96 · max 9.59 us | 106 |
| Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1 | Regulator in Low-power mode; LPR = 1 in PWR_CR1; Wakeup clock MSI = 4 MHz | typ 8 · max 9.47 us | 106 |
| Wake up time from Stop 2 mode to Run mode in Flash memory SMPS bypassed tWUSTOP2 | Range 1; Wakeup clock MSI = 32 MHz; VDD = 3 V; T = 25 °C | typ 5.27 · max 6.07 us | 107 |
| Wake up time from Stop 2 mode to Run mode in Flash memory SMPS bypassed tWUSTOP2 | Range 1; Wakeup clock HSI16 = 16 MHz; VDD = 3 V; T = 25 °C | typ 5.71 · max 6.52 us | 107 |
| Wake up time from Stop 2 mode to Run mode in Flash memory SMPS bypassed tWUSTOP2 | Range 2; Wakeup clock HSI16 = 16 MHz; VDD = 3 V; T = 25 °C | typ 5.72 · max 6.52 us | 107 |
| Wake up time from Stop 2 mode to Run mode in Flash memory SMPS bypassed tWUSTOP2 | Range 2; Wakeup clock MSI = 4 MHz; VDD = 3 V; T = 25 °C | typ 9.1 · max 9.93 us | 107 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 SMPS bypassed tWUSTOP2 | Range 1; Wakeup clock MSI = 32 MHz; VDD = 3 V; T = 25 °C | typ 5.2 · max 5.94 us | 107 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 SMPS bypassed tWUSTOP2 | Range 1; Wakeup clock HSI16 = 16 MHz; VDD = 3 V; T = 25 °C | typ 5.64 · max 6.42 us | 107 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 SMPS bypassed tWUSTOP2 | Range 2; Wakeup clock HSI16 = 16 MHz; VDD = 3 V; T = 25 °C | typ 5.64 · max 6.43 us | 107 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 SMPS bypassed tWUSTOP2 | Range 2; Wakeup clock MSI = 4 MHz; VDD = 3 V; T = 25 °C | typ 9.05 · max 9.85 us | 107 |
| Wakeup time from Standby mode to Run mode SMPS Bypassed tWUSTBY | Range 1; Wakeup clock HSI16 = 16 MHz; VDD = 3 V; T = 25 °C | typ 51 · max 58.1 us | 107 |
| Wakeup time from Low-power run mode to Run mode tWULPRUN | Code run with MSI 2 MHz; VDD = 3 V; T = 25 °C; time until REGLPF flag is cleared in PWR_SR2 | typ 15.33 · max 16.3 us | 107 |
| Regulator transition time from Range 2 to Range 1 or Range 1 to Range 2 tVOST | Code run with HSI16; VDD = 3 V; T = 25 °C; time until VOSF flag is cleared in PWR_SR2 | typ 21.4 · max 28.9 us | 107 |
| Wakeup time needed to calculate the maximum LPUART baud rate allowing to wakeup up from Stop mode when LPUART clock source is HSI16 tWULPUART | Stop mode 0 | max 1.7 us | 107 |
| Wakeup time needed to calculate the maximum LPUART baud rate allowing to wakeup up from Stop mode when LPUART clock source is HSI16 tWULPUART | Stop mode 1/2 | max 8.5 us | 107 |
| Oscillator frequency fNOM | - | typ 32 MHz | 108 |
| Frequency tolerance fTOL | Includes initial accuracy, stability over temperature, aging and frequency pulling due to incorrect load capacitance. | max 20 ppm | 108 |
| Load capacitance CL | - | min 6 · max 8 pF | 108 |
| Equivalent series resistance ESR | - | max 100 Ω | 108 |
| Drive level PD | - | max 100 uW | 108 |
| Startup time for 80% amplitude stabilization tSUA(HSE) | VDDRF stabilized; XOTUNE=000000; -40 to +125 °C range | typ 1000 us | 108 |
| Startup time for XOREADY signal tSUR(HSE) | VDDRF stabilized; XOTUNE=000000; -40 to +125 °C range | typ 250 us | 108 |
| HSE current consumption IDDRF(HSE) | HSEGMC=000, XOTUNE=000000 | typ 50 uA | 108 |
| XOTUNE granularity XOTg(HSE) | Capacitor bank | typ 1 · max 5 ppm | 108 |
| XOTUNE number of tuning bits XOTnb(HSE) | Capacitor bank | typ 6 bit | 108 |
| XOTUNE setting time XOTst(HSE) | Capacitor bank | max 0.1 ms | 108 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 00; Low drive capability | typ 250 nA | 109 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 01; Medium low drive capability | typ 315 nA | 109 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 10; Medium high drive capability | typ 500 nA | 109 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 11; High drive capability | typ 630 nA | 109 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 00; Low drive capability | max 0.5 uA/V | 109 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 01; Medium low drive capability | max 0.75 uA/V | 109 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 10; Medium high drive capability | max 1.7 uA/V | 109 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 11; High drive capability | max 2.7 uA/V | 109 |
| Startup time tSU(LSE) | VDD stabilized | typ 2 s | 109 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C; conforming to ANSI/ESDA/JEDEC JS-001; Class 2 | max 2000 V | 120 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C; conforming to ANSI/ESD STM5.3.1 JS-002; Class C2a | max 500 V | 120 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDD ≥ 2.7 V | max 0.4 V | 124 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDD ≥ 2.7 V | max 0.4 V | 124 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDD ≥ 2.7 V | min 2.4 V | 124 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDD ≥ 2.7 V | max 1.3 V | 124 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA; VDD ≥ 1.62 V | max 0.4 V | 124 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 20 mA; VDD ≥ 2.7 V | max 0.4 V | 124 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 10 mA; VDD ≥ 1.62 V | max 0.4 V | 124 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 2 mA; 1.62 V ≥ VDD ≥ 1.08 V | max 0.4 V | 124 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 5 MHz | 124 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 1.62 V ≤ VDD ≤ 2.7 V | max 1 MHz | 124 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 10 MHz | 124 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 1.62 V ≤ VDD ≤ 2.7 V | max 1.5 MHz | 124 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 25 ns | 124 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 1.62 V ≤ VDD ≤ 2.7 V | max 52 ns | 124 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 17 ns | 124 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 1.62 V ≤ VDD ≤ ≤2.7 V | max 37 ns | 124 |
| LCD external voltage VLCD | max 3.6 V | 144 | |
| LCD internal reference voltage 0 VLCD0 | typ 2.62 V | 144 | |
| LCD internal reference voltage 1 VLCD1 | typ 2.76 V | 144 | |
| LCD internal reference voltage 2 VLCD2 | typ 2.89 V | 144 | |
| LCD internal reference voltage 3 VLCD3 | typ 3.04 V | 144 | |
| LCD internal reference voltage 4 VLCD4 | typ 3.19 V | 144 | |
| LCD internal reference voltage 5 VLCD5 | typ 3.32 V | 144 | |
| LCD internal reference voltage 6 VLCD6 | typ 3.46 V | 144 | |
| LCD internal reference voltage 7 VLCD7 | typ 3.62 V | 144 | |
| VLCD external capacitance Cext | Buffer OFF; BUFEN=0 is LCD_CR register | min 0.2 · max 2 uF | 144 |
| VLCD external capacitance Cext | Buffer ON; BUFEN=1 is LCD_CR register | min 1 · max 2 uF | 144 |
| Supply current from VDD at VDD = 2.2 V ILCD | Buffer OFF; BUFEN=0 is LCD_CR register | typ 3 uA | 144 |
| Supply current from VDD at VDD = 3.0 V ILCD | Buffer OFF; BUFEN=0 is LCD_CR register | typ 1.5 uA | 144 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer OFF; BUFFEN = 0, PON = 0 | typ 0.5 uA | 144 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer ON; BUFFEN = 1, 1/2 Bias | typ 0.6 uA | 144 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer ON; BUFFEN = 1, 1/3 Bias | typ 0.8 uA | 144 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer ON; BUFFEN = 1, 1/4 Bias | typ 1 uA | 144 |
| Total High resistor value for Low drive resistive network RHN | typ 5.5 MΩ | 144 | |
| Total Low resistor value for High drive resistive network RLN | typ 240 kΩ | 144 |
Open-source boards using it
6- 2 layers100 × 65 mm

- 4 layers55.5 × 32 mm

SAFE ROOM
dibreyjonatan/SAFE-ROOM
SAFE ROOM est une dispositif électronique qui permet de connaitre en temps réel, les conditions d'une pièce. A savoir la qualité d'air, la temperature, l'humidité, et la pression.
52 partsGPL-3.0 - 8 layers50 × 50 mm

- 4 layers100 × 30 mm

Nrst tracks only
vexpaer/vexpaers_heart
Open-source Holter ECG recorder hardware: ADS1294R, STM32WB55, microSD, BLE and USB-Pogo dock
167 partsCERN-OHL-S-2.0 - 4 layers45 × 80 mm

- 4 layers100 × 60 mm

Parts like it
3STM32WB55REV6
VFQFPN-68(8x8)-40℃~+105℃ -96dBm 1.71V~3.6V 2.402GHz~2.48GHz 2.4GHz 2Mbps 4.5mA 5.2mA 6dBm SPI、USB、UART、ADC、I2C、JTAG、PDM ZigBee、Bluetooth、802.15.4 transceiver VFQFPN-68(8x8) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsRF Transceiver ICsSTM32WB55RGV7
QFN-68-EP(8x8)-40℃~+105℃ -96dBm 1.71V~3.6V 2.402GHz~2.48GHz 2.4GHz 2Mbps 3.7dBm 4.5mA 5.2mA SPI、USB、UART、ADC、I2C、JTAG、PDM ZigBee、Bluetooth transceiver QFN-68-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsRF Transceiver ICsSTM32WB55RGV6U
VFQFPN-68(8x8)-40℃~+105℃ 1.71V~3.6V 2Mbps 6dBm SPI、USART、USB、UART、ADC、I2C VFQFPN-68(8x8) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsRF Transceiver ICs
Questions
Is there a KiCad symbol and footprint for the STM32WB55RGV6?
Yes. The symbol is MCU_ST_STM32WB:STM32WB55RGVx and the footprint Package_DFN_QFN:QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32WB55RGV6?
QFN-68-EP(8x8), with 69 pins. Its footprint is drawn on this page.
Where is the STM32WB55RGV6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32WB55RGV6?
JLCPCB lists it as part C401505, with 53 in stock; the sellers' links on this page open their listings.
What can replace the STM32WB55RGV6?
Parts like it in the library: the STM32WB55REV6 by STMicroelectronics, the STM32WB55RGV7 by STMicroelectronics and the STM32WB55RGV6U by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32WB55RGV6?
6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.