Skip to the content
2 layers100 × 65 mmAstroplant AL, the printed circuit board in 3D

Raw data files for hardware PCB's

Size
100 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
102
Nets
98
Pads
388
Tracks, vias
881, 217
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Sep 2018
Updated
12 May 2024

Overview

Astroplant AL is an open-source printed circuit board by AstroPlant, from the AstroPlant/astroplant-hardware repository on GitHub. It is a 2-layer board of 100 × 65 mm with 102 parts on 98 nets, routed with 881 tracks and 217 vias.

It is built around the STM32WB55RGV6, DEA162450BT-1260B2 and USBLC6-2SC6, with the CRCW06031K00DHEBP, CRCW060310K0DHEAP and VJ0603Y104MXJCW1BC among its other parts. Its parts include 27 resistors, 26 connectors, 21 capacitors, 6 diodes and 5 transistors. It belongs with the STM32 boards of this library.

Main components

12

README

Electronics/PCB/AstroPlant_ExtensionBoard/astroplant-extension-board-mk0-7/README.md

Power supply configuration

You can select different configuration to supply the board, On the 3.3V line: you can choose between power the board with the raspberry or with the onboard 3.3V generator On the 5V line you can choose to power the board through : Raspberry pi, Board 5V input, micro-USB

With the astroplant-kit you need 2 jumper : connect 3.3V with the onboard generator connect 5V to the Board 5V input,

Boot-mode

To program the board you need the microcontroller to enter boot-mode, to do this power the board while pushing Boot button, or reset the board while pushing Boot button, To leave Boot-mode, reset the board with the button, or switch the power Off and On without pushing on boot button

Antenna

Don't place R26 and C6 if you want to use the PCB antenna or Don't place R25 to use the UFL connector with an antenna

To manufacture the PCB you need these files:

  • gerber - track/component placement
  • .drl - drill placement
  • .pos - component placement These file are avaible in the /Outputs directory

The BOM is available in the main folder, as it is not part of the manufacturing files.

If you want to generate new output files, follow these steps:

First you'll need Kicad 7.0: https://www.kicad.org/download/ Then open the project by executing the .kicad_pro file, you will then be able to see the different elements of the project such as the schematic and the pcb, If you want the gerber or drill map, open the pcb editor (.kicad_pcb) and go "File -> Fabrication output ->Gerbers/Drill/Component Placement/BOM". For each file, select the output directory before generating

We'll use the general parameter for output files. For Gerber, select layers: B_Cu,B_Mask,B_Paste,B_Silkscreen,F_Cu,F_Mask,F_Paste,F_Silkscreen,Edge_Cuts and User_Eco2 and leave the other options as they are.

MK07

Specs

  • 5V Input
    • Power RPI
    • Power sensors actuators
  • 24V Input
    • Mosfet Output
    • LEDs connector (not for the moment)
  • 3x Buttons
    • GPIO5
    • GPIO6
    • GPIO7
  • 2x 1-Wire lines (2 connectors)
    • GPIO17 Humidity
    • GPIO4 Water temp
  • CO2 interface (Rx, Tx, 5V, GND)
  • SPI interface (NRF24)
  • I2C
    • 4x 3.3v
    • 2x 5V
  • LEDs panel interface
    • GPIO21 Blue
    • GPIO20 Red
    • GPIO18 Far
  • 3x mosfet output (5V or 24V) 2A
    • GPIO16 Fans
    • GPIO12 Pump
    • GPIO19 Spare
  • Add LED
  • Zigbee/Thread interface
  • Analog to digital converter
    • 2x

GPIO13 is still not used

Parts

102
QtyValueFootprintReferences
12CRCW06031K00DHEBPResistor_SMD:R_0603_1608MetricR6, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23
11CRCW060310K0DHEAPResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R7, R8, R9, R10, R12, R24
10VJ0603Y104MXJCW1BCCapacitor_SMD:C_0603_1608MetricC1, C2, C5, C9, C10, C11, C12, C14, C17, C18
7B2B-XH-A(LF)(SN) SamacSys_Parts:SHDR2W64P0X250_1X2_740X575X700PJ5, J8, J11, J16, J17, J18, J19
6B4B-XH-A(LF)(SN) SamacSys_Parts:B4BXHALFSNJ22, J23, J24, J25, J26, J27
5430156043726Button_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3, SW4, SW5
5IRLML6344TRPBFPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5
4B3B-XH-A(LF)(SN) SamacSys_Parts:B3BXHALFSNJ3, J4, J7, J9
4GRM1555C1H1R2WA01DSamacSys_Parts:CAPC1005X55NC6, C19, C20, C21
3S1A-13-FDiode_SMD:D_SMAD2, D3, D4
2691102710002SamacSys_Parts:SHDR2W100P0X500_1X2_1000X750X990PJ20, J21
2CRCW04020000Z0EDCResistor_SMD:R_0603_1608MetricR25, R26
2CRCW0603180RFKEAResistor_SMD:R_0603_1608MetricR11, R27
2GRM185R61C105KE44DSamacSys_Parts:CAPC1608X50NC15, C16
2LQG15HS3N6S02DSamacSys_Parts:LQG15WH0N7B02DL1, L3
161300311121Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP5
161300621121SamacSys_Parts:HDRV6W64P254_2X3_762X508X889PJ14
161304021121SamacSys_Parts:HDRV40W64P254X254_2X20_5080X508X869PJ2
1875115150005Capacitor_SMD:CP_Elec_8x6.9C3
1875115652007SamacSys_Parts:CAPAE830X900NC4
1AntennaRF_Antenna:Texas_SWRA117D_2.4GHz_LeftAE1
1B4B-XH-A(LF)(SN)SamacSys_Parts:B4BXHALFSNJ10
1B5B-XH-A(LF)(SN)SamacSys_Parts:SHDR5W64P0X250_1X5_1490X575X700PJ13
1B6B-XH-A(LF)(SN)SamacSys_Parts:SHDR6W64P0X250_1X6_1740X575X700PJ1
1BAT54KFILMSamacSys_Parts:SODFL1608X70ND1
1CONUFL001-SMD-TSamacSys_Parts:CONUFL001-SMDJ12
1DEA162450BT-1260B2SamacSys_Parts:DEA162450BT1295A1FL1
1GRM1555C1HR30WA01DSamacSys_Parts:CAPC1005X55NC7
1GRM1555C1HR80BA01DSamacSys_Parts:CAPC1005X55NC8
1LD39050PU33RSamacSys_Parts:SON95P300X300X100-7N-DPS1
1LOGOressources:rocket_cu2G***
1LQG15HS2N7S02JSamacSys_Parts:LQG15WH0N7B02DL2
1NX2016SA-32M-EXS00A-CS06465SamacSys_Parts:NX2016SA32MEXS00ACS06465Y1
1SML-D12D8WT8LED_SMD:LED_0603_1608MetricD5
1SMLEN3BC8TT86LED_SMD:LED_0603_1608MetricD6
1STM32WB55RGV6Package_DFN_QFN:QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mmU2
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1
1VJ0603Y101KXQPW1BCCapacitor_SMD:C_0603_1608MetricC13
1ZX62D-B-5PA8_30_SamacSys_Parts:ZX62DB5PA830J15

The 101 most common of 102 parts.

More from AstroPlant/astroplant-hardware

1
  • 2 layers100 × 65 mmAstroplant VFR, the printed circuit board in 3D

    Astroplant VFR

    AstroPlant/astroplant-hardware

    Raw data files for hardware PCB's

    62 parts3

Similar boards

  • 4 layers55.5 × 32 mmSAFE ROOM, the printed circuit board in 3D

    SAFE ROOM

    dibreyjonatan/SAFE-ROOM

    SAFE ROOM est une dispositif électronique qui permet de connaitre en temps réel, les conditions d'une pièce. A savoir la qualité d'air, la temperature, l'humidité, et la pression.

    52 partsGPL-3.0
  • 4 layers100 × 30 mmNrst tracks only, the printed circuit board in 3D

    Nrst tracks only

    vexpaer/vexpaers_heart

    Open-source Holter ECG recorder hardware: ADS1294R, STM32WB55, microSD, BLE and USB-Pogo dock

    167 partsCERN-OHL-S-2.0
  • 4 layers58 × 38 mmBlue Pedal, the printed circuit board in 3D

    Blue Pedal

    Arre-Jay/BlueWavePCB

    Untested bluetooth and IMU board with USB input

    80 parts3
  • 4 layers117 × 77 mmProdDeck, the printed circuit board in 3D

    ProdDeck

    arsovskiteodor/A.ProdDeck

    Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator

    69 parts
  • 4 layers30 × 30 mmWearable imu, the printed circuit board in 3D

    Wearable imu

    davispe1/wearable-imu

    Node PCB — revision 1.0. 4-layer board (F.Cu, In1.Cu, In2.Cu, B.Cu).

    72 partsMIT
  • 4 layers48 × 25 mmStm32mc, the printed circuit board in 3D

    Stm32mc

    justinfederico/STM32testPCB

    Custom STM32WB microcontroller to practice my PCB schematic and layout skills. Looking to get it printed soon! Bear in mind that this is an ameuter project, so there will probably be errors aplenty.

    51 parts
  • 4 layers53.5 × 28.8 mmSTM32WB PCB2, the printed circuit board in 3D

    STM32WB PCB2

    NasserTaqi/STM32WB_Bluetooth_PCB

    This project is a PCB built around an STM32WB for RF Bluetooth connection.

    52 parts
  • 4 layers52 × 25 mmFlying byte v1, the printed circuit board in 3D

    Flying byte v1

    PanBabinicz/ghost-feather

    Here: - -n myenv specifies the environment name - python=3.10 installs a specific Python version

    52 parts

Questions

How big is the Astroplant AL PCB?

It measures 100 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Astroplant AL use?

102 parts, built around the STM32WB55RGV6, DEA162450BT-1260B2, USBLC6-2SC6 and CRCW06031K00DHEBP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Astroplant AL KiCad files?

From the AstroPlant/astroplant-hardware repository on GitHub, at the commit this page was made from: the board is Electronics/PCB/AstroPlant_ExtensionBoard/astroplant-extension-board-mk0-7/Astroplant_AL.kicad_pcb and its schematic Electronics/PCB/AstroPlant_ExtensionBoard/astroplant-extension-board-mk0-6-1/Astroplant_VFR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Astroplant AL design in my own project?

Its repository states no licence, so its author keeps all rights: ask AstroPlant before reusing the design.