Skip to the content
PCBKitNew board
BAT54SW on a board, in 3D

BAT54SW

Nexperia

1 Pair Series Connection 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-323 Schottky Diodes ROHS

Extended
DatasheetJLCPCBLCSCnexperia/BAT54SW
Category
Schottky Diodes
Package
SOT-323
Pins
3

Overview

The BAT54SW is a schottky Diode made by Nexperia in a SOT-323 package with 3 pins. 1 Pair Series Connection 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-323 Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Diode:BAT54SW, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-323_SC-70, from KiCad's library), ready for a KiCad board. 2,845 are in stock at JLCPCB (part C78606). 44 open-source boards in 38 repositories on GitHub use it.

Symbol

A1K2COM3
Diode:BAT54SWFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-323_SC-70From KiCad's library

From the datasheet

11
Reverse voltage, most
30 V · max reverse voltage per diode · p. 3
Forward current, most
200 mA · max continuous forward current per diode · p. 3
Works from
-55 °C · min ambient temperature, limiting value · p. 3
Works up to
150 °C · max ambient temperature, limiting value · p. 3
Junction, hottest
150 °C · max junction temperature · p. 3
Junction to air (SOT323)
625 K/W · max in free air, one diode loaded, standard footprint on single-sided FR4 PCB · p. 3
Forward voltage
240 mV · max at IF = 0.1 mA, Tamb = 25 °C, pulse test · p. 4
Forward voltage
320 mV · max at IF = 1 mA, Tamb = 25 °C, pulse test · p. 4
Forward voltage
400 mV · max at IF = 10 mA, Tamb = 25 °C, pulse test · p. 4
Forward voltage
500 mV · max at IF = 30 mA, Tamb = 25 °C, pulse test · p. 4
Forward voltage
800 mV · max at IF = 100 mA, Tamb = 25 °C, pulse test · p. 4

What it is and has

5
Protection
Integrated guard ring for stress protection · p. 1
Forward voltage
Low · p. 1
Capacitance
Low · p. 1
Qualification
AEC-Q101 qualified · p. 1
Package
SOT323 (SC-70), plastic surface-mounted package, 3 leads · p. 2

Specifications

19
ParameterConditionsAs printedPage
reverse voltage VRPer diode; Tamb = 25 °Cmax 30 V1
forward voltage VFPer diode; Tamb = 25 °C; IF = 100 mA; pulse test: tp ≤ 300 us; δ ≤ 0.02max 800 mV1
reverse current IRPer diode; Tamb = 25 °C; VR = 25 V; pulse test: tp ≤ 300 us; δ ≤ 0.02max 2 A1
reverse voltage VRPer diodemax 30 V3
forward current IFPer diodemax 200 mA3
repetitive peak forward current IFRMPer diode; tp ≤ 1 s; δ ≤ 0.5max 300 mA3
non-repetitive peak forward current IFSMPer diode; square wave; tp < 10 ms; Tj = 25 °C before surgemax 600 mA3
total power dissipation PtotPer device; one diode loaded; Tamb ≤ 25 °C; mounted on FR4 PCB, single-sided copper, tin-plated and standard footprintmax 200 mW3
junction temperature TjPer device; one diode loadedmax 150 C3
ambient temperature TambPer device; one diode loadedmin -55 · max 150 C3
storage temperature TstgPer device; one diode loadedmin -65 · max 150 C3
thermal resistance from junction to ambient Rth(j-a)SOT323; per device; one diode loaded; in free air; mounted on FR4 PCB, single-sided copper, tin-plated and standard footprintmax 625 K/W3
forward voltage VFPer diode; Tamb = 25 °C; IF = 0.1 mA; pulse test: tp ≤ 300 us; δ ≤ 0.02max 240 mV4
forward voltage VFPer diode; Tamb = 25 °C; IF = 1 mA; pulse test: tp ≤ 300 us; δ ≤ 0.02max 320 mV4
forward voltage VFPer diode; Tamb = 25 °C; IF = 10 mA; pulse test: tp ≤ 300 us; δ ≤ 0.02max 400 mV4
forward voltage VFPer diode; Tamb = 25 °C; IF = 30 mA; pulse test: tp ≤ 300 us; δ ≤ 0.02max 500 mV4
forward voltage VFPer diode; Tamb = 25 °C; IF = 100 mA; pulse test: tp ≤ 300 us; δ ≤ 0.02max 800 mV4
diode capacitance CdPer diode; Tamb = 25 °C; f = 1 MHz; VR = 1 Vmax 10 pF4
reverse recovery time trrPer diode; Tamb = 25 °C; switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mAmax 5 ns4

Pins, by the datasheet

2
1 anode (diode 1)
Anode of diode 1. · p. 2
2 cathode (diode 2)
Cathode of diode 2. · p. 2

Ordering codes, by the datasheet

1
BAT54SW
SOT323 (SC-70) · Two series-connected diodes; marking code 44*; * identifies manufacturing site · p. 2

Parameters

10
Current - Rectified
200mA
Diode Configuration
1 Pair Series Connection
Junction Temperature(Max)
150℃
Non-Repetitive Peak Forward Surge Current
600mA
Operating Temperature
-55℃~+150℃
Reverse Leakage Current (Ir)
2uA@25V
Thermal Resistance(Junction to Ambient)
625℃/W
Voltage - DC Reverse(Vr)
30V
Voltage - Forward(Vf)
240mV
Voltage - Forward(Vf@If)
800mV@100mA

Order codes

1

Pinout

3
The pins of the BAT54SW
PinNameType
1APassive
2KPassive
3COMPassive

Open-source boards using it

All 44
  • 8 layers100 × 60 mmYAMMU ControlBoard v05, the printed circuit board in 3D

    YAMMU ControlBoard v05

    Zergie/YAMMU

    A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.

    234 parts107GPL-3.0
  • 4 layers481.3 × 23.7 mmFaraday rescue bms, the printed circuit board in 3D

    Faraday rescue bms

    nhallsny/faraday-rescue

    Open source battery for e-bikes made by the now-defunct Faraday Bicycles

    155 parts8CERN-OHL-P-2.0
  • 4 layers129 × 79.5 mmStimjim, the printed circuit board in 3D

    Stimjim

    open-ephys/stimjim

    A precise intra and extracellular electrical stimulator

    236 parts7
  • 2 layers40.1 × 109.9 mmDemiurge, the printed circuit board in 3D

    Demiurge

    AwesomeAudioApparatus/demiurge

    Demiurge is a combination of Hardware and Software for Digital Sound Processing in the Eurorack Modular Synthesizer environment.

    155 parts4Apache-2.0
  • 4 layers100 × 100 mmThree Half Bridges, the printed circuit board in 3D

    Three Half Bridges

    powermax555/Three-Half-Bridges

    Half bridge module for use in larger power conversion and motor control systems

    156 parts3
  • 4 layers69 × 39 mmJPBms2, the printed circuit board in 3D

    JPBms2

    jakepoz/jpbms

    JPBms is a simple BMS for solar charging and balancing a 3-cell lithium ion battery.

    132 parts2
  • 4 layers83 × 121 mmCarrier1 Adalogger M0 2x3pin, the printed circuit board in 3D

    Carrier1 Adalogger M0 2x3pin

    Safecast/bGeigieScint

    The board features an integrated boost converter + linear regulator topology for SiPM bias generation:

    123 parts2
  • 2 layers101.6 × 78.7 mmBADGER v41, the printed circuit board in 3D

    BADGER v41

    wyolum/BADGEr

    EReader badge and shield

    117 parts2

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/nexperia/BAT54SW" title="BAT54SW in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/nexperia/BAT54SW.jpg" alt="BAT54SW" width="1200" height="900">
A picture that opens the part, for a README
[![BAT54SW](https://pcbkit.io/embed/parts/nexperia/BAT54SW.jpg?size=s)](https://pcbkit.io/parts/nexperia/BAT54SW)

Questions

Is there a KiCad symbol and footprint for the BAT54SW?

Yes. The symbol is Diode:BAT54SW and the footprint Package_TO_SOT_SMD:SOT-323_SC-70, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BAT54SW?

SOT-323, with 3 pins. Its footprint is drawn on this page.

Where is the BAT54SW datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the BAT54SW?

JLCPCB lists it as part C78606, with 2,845 in stock; the sellers' links on this page open their listings.

What can replace the BAT54SW?

Parts like it in the library: the BAT54SW by hongjiacheng, the BAT54SW by onsemi, the LBAT54CWT1G by Leshan Radio (LRC) and the LBAT54SWT1G by Leshan Radio (LRC). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BAT54SW?

44 boards in 38 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8