
SCAN
jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.

Bettery is an open-source printed circuit board by nkulis, from the nkulis/bettery repository on GitHub, published under the MIT licence. It is a 2-layer board of 72.2 × 45.2 mm with 86 parts on 96 nets, routed with 447 tracks and 72 vias.
It is built around the L9961, BAT54SWFILMY and CSD17581Q3A, with the CSD17575Q3 and SS54 among its other parts. Its parts include 5 transistors, 5 connectors, 4 diodes, 3 ICs and 2 capacitors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10u | Capacitor_SMD:C_0603_1608Metric | C_B1, C_B3, C4, C5, C6, C7, C8, C9, C10 |
| 5 | 10.5k | Resistor_SMD:R_0603_1608Metric | R_PROG1, R_TS1, R_TS2, R1, R2 |
| 5 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C_ISENSE_1, C_ISENSE_CM1, C_ISENSE_CM2, C_VREG1, C3 |
| 4 | 39 | Resistor_SMD:R_0603_1608Metric | R_LPF1, R_LPF2, R_LPF3, R_LPF4 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R_FLT_UP1, R_FLTS_UP1, R_SCL_UP1, R_SDA_UP1 |
| 3 | 2.2k | Resistor_SMD:R_0603_1608Metric | R_LED1, R_LED2, R_LED3 |
| 3 | 470n | Capacitor_SMD:C_0603_1608Metric | C_LPF1, C_LPF2, C_LPF3 |
| 3 | 6m | bettery:R_Shunt_Vishay_WSHP2818 | R_SHUNT1, R_SHUNT2, R_SHUNT3 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D_LED1, D_LED2, D_LED3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R_RDY1, R_SENSE1 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C_NSHIP1, C_WAKEUP1 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R_FIL1, R_FUSE1 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R_ISENSE1, R_ISENSE2 |
| 2 | 2M | Resistor_SMD:R_0603_1608Metric | R_CHG1, R_DCHG1 |
| 2 | 4.7n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 6.8n | Capacitor_SMD:C_0603_1608Metric | C_CP_1, C_CP_2 |
| 2 | BAT54SWFILMY | Package_TO_SOT_SMD:SOT-323_SC-70 | D1, D3 |
| 2 | CSD17581Q3A | Package_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q4, Q5 |
| 2 | MountingHole_Pad | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | H1, H2 |
| 2 | WMB014N06LG4 | bettery:WMB014N06LG4-PDFN5060-8L | Q1, Q2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R_NSHIP_PD1 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C_RDY1 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C_FILL1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R_WAKEUP1 |
| 1 | 1u | Inductor_SMD:L_Sumida_CDMC6D28_7.25x6.5mm | L_B2 |
| 1 | 1u | Inductor_SMD:L_0805_2012Metric | L_B1 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C_B2 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C_ISENSE_2 |
| 1 | 294 | Resistor_SMD:R_0603_1608Metric | R_ACDRV1 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R_PU1 |
| 1 | 68n | Capacitor_SMD:C_0603_1608Metric | C_CP1 |
| 1 | BQ25798 | Package_DFN_QFN:Texas_RQM0029A_VQFN-29_4x4mm_P0.4mm | U3 |
| 1 | BZT52C12T-7 | Diode_SMD:D_SOD-523 | D4 |
| 1 | CONN12_RAHUC31_SWC | bettery:CONN12_RAHUC31_SWC | J5 |
| 1 | CSD17575Q3 | Package_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q3 |
| 1 | Conn_01x10_Socket | bettery:1674231_SMD | J2 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | bettery:WR-WST-REDFIT-IDC-6pin | J4 |
| 1 | L9961 | Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U1 |
| 1 | SS54 | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | STM32G070KBTx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | ~ | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | ~ | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
The 83 most common of 86 parts.

jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.




dmcke5/MiniPC_BMS
An all in one power managment solution for powering mini pc's with batteries!

garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220

Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

LUntiedt/Smart_IOT_PowerBank_PCB
A bidirectional USB-C Power Delivery (PD) power bank built around a software-defined PD stack and an I²C buck-boost charger. This repository holds the KiCad hardware design (schematic, layout, BOM, fabrication outputs).
It measures 72.2 × 45.2 mm and has 2 copper layers, 1.6 mm thick.
86 parts, built around the L9961, BAT54SWFILMY, CSD17581Q3A and CSD17575Q3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nkulis/bettery repository on GitHub, at the commit this page was made from: the board is bettery/bettery.kicad_pcb and its schematic bettery/bettery.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).