

MinSysSTM32
- Size
- 53.7 × 60.1 mm
- Copper layers
- 2
- Thickness
- 1.56 mm
- Parts
- 55
- Nets
- 80
- Pads
- 225
- Tracks, vias
- 466, 81
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Dec 2025
- Updated
- 16 Dec 2025
Overview
MinSysSTM32 is an open-source printed circuit board by NinoBramantara, from the NinoBramantara/STM32F401-Minimum-System repository on GitHub. It is a 2-layer board of 53.7 × 60.1 mm with 55 parts on 80 nets, routed with 466 tracks and 81 vias.
It is built around the MAX485ED, AP63205WU and AMS1117-3.3. Its parts include 21 capacitors, 13 connectors, 6 resistors, 5 ICs and 1 diode. It belongs with the STM32 boards of this library.
Main components
3MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsAP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C7, C14, C15, C17, C18, C19, C20 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6 |
| 2 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S_Pad1.58x1.35mm_HandSolder | C9, C10 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C11, C12 |
| 2 | 16p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C13 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 12C0 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J11 |
| 1 | 12C1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J12 |
| 1 | 12C2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13 |
| 1 | 12C3 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J14 |
| 1 | 2u2 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 470u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C21 |
| 1 | 4u7 | Inductor_SMD:L_Changjiang_FNR5045S | L1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | CMPS | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | DEBUG | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | DXL | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | SERVO | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J9 |
| 1 | STM32F401RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U6 |
| 1 | USC1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | USC2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | USC3 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | USC4 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | VIN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
The 51 most common of 55 parts.
Similar boards
- 4 layers96 × 172 mm

- 2 layers81.3 × 72.9 mm

- 2 layers82.8 × 42.3 mm

TBP
AAPythonCode/TBP
It's summer break, and I want to create something cool! Since I play tennis on a daily basis, I thought of creating something related to it.
33 partsCC0-1.0 - 2 layers94.1 × 63.5 mm

GarageOpener
AshiqAshref/Garage-Door-Opener
Universal Garage Door using BLE (Bluetooth Low Power) running on ESP32 with highest security possible.
42 partsMIT - 4 layers100 × 50 mm

- 4 layers54.5 × 40.8 mm

- 2 layers120 × 102.5 mm

Dsug cctv BOARD
LucasLHenry/spelltwister
This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.
251 partsMIT - 2 layers69.9 × 120.5 mm

Questions
How big is the MinSysSTM32 PCB?
It measures 53.7 × 60.1 mm and has 2 copper layers, 1.56 mm thick.
What parts does the MinSysSTM32 use?
55 parts, built around the MAX485ED, AP63205WU and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MinSysSTM32 KiCad files?
From the NinoBramantara/STM32F401-Minimum-System repository on GitHub, at the commit this page was made from: the board is MinSysSTM32.kicad_pcb and its schematic MinSysSTM32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MinSysSTM32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask NinoBramantara before reusing the design.