
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A Mechanical Keyboard PCB design supported by QMK
AbacusPCB is an open-source printed circuit board by nickolaij, from the nickolaij/Abacus_Rev2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 265.1 × 76.2 mm with 140 parts on 89 nets, routed with 504 tracks and 45 vias.
It is built around the WS2812B. Its parts include 46 switches, 45 diodes, 17 capacitors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
A 45% mechanical keyboard that includes an encoder volume/scroll wheel and RGB lighting.
This keyboard is powered by QMK, visit the QMK Repository to see all the amazing keyboards supported by them.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | D | AbacusPCB:Diode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 38 | KEYSW | MX_Alps_Hybrid:MX-1U-NoLED | K1, K2, K10, K11, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K26, K27 +22 |
| 17 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17 +1 |
| 17 | WS2812B | AbacusPCB:WS2812_Hand_Solder | W1, W2, W3, W4, W5, W6, W7, W8, W10, W11, W12, W13, W14, W15, W16, W17 +1 |
| 13 | MH | AbacusPCB:M3 Hole | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13 |
| 2 | KEYSW | MX_Alps_Hybrid:MX-1.25U-NoLED | K13, K37 |
| 2 | KEYSW | MX_Alps_Hybrid:MX-1.75U-NoLED | K12, K25 |
| 2 | KEYSW | MX_Alps_Hybrid:MX-2.75U-ReversedStabilizers-NoLED | K40, K41 |
| 1 | Elite-C_Pro-Micro | AbacusPCB:Elite-C Pro-Micro | U1 |
| 1 | KEYSW | MX_Alps_Hybrid:MX-1.5U-NoLED | K24 |
| 1 | LOGO | AbacusPCB:art | G*** |
| 1 | Rotary_Encoder_Switch | AbacusPCB:Encoder | SW1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 265.1 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
140 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nickolaij/Abacus_Rev2 repository on GitHub, at the commit this page was made from: the board is AbacusPCB/AbacusPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).