
Biohand main board
MartinBloedorn/biohand
Files and documentation for the Biohand project.

A system to control analogue model railways combining the advantages of analogue and digital.
Railway can is an open-source printed circuit board by nibble-arts, from the nibble-arts/railway-can repository on GitHub. It is a 2-layer board of 30 × 30 mm with 3 parts on 71 nets.
It is built around the ESP32-PICO-V3-02, MCP2551-I/SN-HG and DRV8801PWP. It belongs with the ESP32 and RISC-V boards of this library.
Die Schaltungen und Platinen werden mit KiCAD entwickelt und stehen hier zur Verfügung.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | DRV8801PWP | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias | U3 |
| 1 | ESP32-PICO-V3-02 | ESP32-Pico:ESP32-PICO-V3-02 | U1 |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

MartinBloedorn/biohand
Files and documentation for the Biohand project.

HydrogreenPollub/legacy-pcb-hydrogen-cylinder
PCB for Ecson motor driver


RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters

X-Green/24to12-BrushedMotorDriverPCB
Use DRV8801 to drive 12V 1A BDC Motor


Neurallabware/Airscope_toolbox
A 1-gram wireless mesoscope for cortex-wide, single-cell-resolution imaging during unrestricted behaviour

It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
3 parts, built around the ESP32-PICO-V3-02, MCP2551-I/SN-HG and DRV8801PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nibble-arts/railway-can repository on GitHub, at the commit this page was made from: the board is hardware/pcb/Railway-CAN.kicad_pcb and its schematic hardware/pcb/Railway-CAN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nibble-arts before reusing the design.