
Pcb schematic main HCU
HydrogreenPollub/legacy-pcb-hydrogen-cylinder
PCB for Ecson motor driver

Files and documentation for the Biohand project.
Biohand main board is an open-source printed circuit board by MartinBloedorn, from the MartinBloedorn/biohand repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 42.5 × 57.8 mm with 64 parts on 104 nets, routed with 951 tracks and 25 vias.
It is built around the DRV8801PWP and LD1117S33TR(MS). Its parts include 20 resistors, 14 capacitors, 13 connectors, 7 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Files and documentation for the Biohand project.
You can follow the development of the prototype in my personal page or in Hackday.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistors_SMD:R_0805_HandSoldering | R3, R4, R8, R9, R10, R11, R12, R13, R15, R16 |
| 6 | C | Capacitors_SMD:C_0805_HandSoldering | C3, C6, C8, C9, C10, C15 |
| 5 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C4, C7, C11, C12, C16 |
| 5 | 1k | Resistors_SMD:R_0805_HandSoldering | R2, R5, R6, R7, R14 |
| 5 | DRV8801 | Housings_SSOP:SSOP-16_5.3x6.2mm_Pitch0.65mm | U3, U4, U5, U6, U7 |
| 2 | 470r | Resistors_SMD:R_0805_HandSoldering | R18, R19 |
| 2 | D | Diodes_ThroughHole:Diode_DO-201AD_Horizontal_RM15 | D1, D2 |
| 2 | LED | LEDs:LED-0805 | D3, D4 |
| 1 | 0r | Resistors_SMD:R_0805_HandSoldering | R20 |
| 1 | 100k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 10k | Resistors_SMD:R_0805_HandSoldering | R17 |
| 1 | 10uF | Capacitors_SMD:c_elec_5x5.3 | C2 |
| 1 | 10uF | Capacitors_SMD:c_elec_4x5.3 | C5 |
| 1 | 10uF | Capacitors_Elko_ThroughHole:Elko_vert_11x5mm_RM2 | C1 |
| 1 | 1pin | Connect:1pin | |
| 1 | CONN_BATT | Wire_Connections_Bridges:WireConnection_1mmDrill | BATT |
| 1 | CONN_DRV0 | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | CONN_DRV1 | Pin_Headers:Pin_Header_Straight_1x02 | P4 |
| 1 | CONN_DRV2 | Pin_Headers:Pin_Header_Straight_1x02 | P6 |
| 1 | CONN_DRV3 | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | CONN_DRV4 | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
| 1 | CONN_POT0 | Pin_Headers:Pin_Header_Angled_1x03 | P7 |
| 1 | CONN_POT1 | Pin_Headers:Pin_Header_Angled_1x03 | P8 |
| 1 | CONN_POT2 | Pin_Headers:Pin_Header_Angled_1x03 | P9 |
| 1 | CONN_POT3 | Pin_Headers:Pin_Header_Angled_1x03 | P10 |
| 1 | CONN_POT4 | Pin_Headers:Pin_Header_Angled_1x03 | P11 |
| 1 | CONN_SERVO | Pin_Headers:Pin_Header_Straight_1x03 | P12 |
| 1 | CONN_SWD | Pin_Headers:Pin_Header_Angled_1x05 | SWD |
| 1 | CONN_UART1 | Pin_Headers:Pin_Header_Angled_1x04 | P15 |
| 1 | CONN_UART2 | Pin_Headers:Pin_Header_Angled_1x04 | P14 |
| 1 | LD1117S33TR | SMD_Packages:SOT-223 | U1 |
| 1 | MPU6050-BrOut | biohand_fp:MPU6050-BrOut | IMU |
| 1 | STM32F103 | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U2 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | Symbol_OSHW-Logo_SilkScreen | Symbols:Symbol_OSHW-Logo_SilkScreen |

HydrogreenPollub/legacy-pcb-hydrogen-cylinder
PCB for Ecson motor driver


nibble-arts/railway-can
A system to control analogue model railways combining the advantages of analogue and digital.

RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters

X-Green/24to12-BrushedMotorDriverPCB
Use DRV8801 to drive 12V 1A BDC Motor



It measures 42.5 × 57.8 mm and has 2 copper layers, 1.6 mm thick.
64 parts, built around the DRV8801PWP and LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MartinBloedorn/biohand repository on GitHub, at the commit this page was made from: the board is electrical/biohand_main_board/biohand_main_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).