Skip to the content
123456789101112131415161717171717171717171717171717171717

DRV8801PWP

Texas InstrumentsExtended

-40℃~+85℃ 1 10uA 2.8A 8V~36V Yes HTSSOP-16-EP Brushed DC Motor Drivers ROHS

Part id
ti/DRV8801PWP
Category
Motor Driver ICs
Package
HTSSOP-16-EP
Pins
17
In stock
30,481 at JLCPCB (C41146)
Used on
7 open-source boards

Overview

The DRV8801PWP is a motor Driver IC made by Texas Instruments in a HTSSOP-16-EP package with 17 pins. -40℃~+85℃ 1 10uA 2.8A 8V~36V Yes HTSSOP-16-EP Brushed DC Motor Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8801PWP, from KiCad's library) and its footprint (Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias, from KiCad's library), ready for a KiCad board. 30,481 are in stock at JLCPCB (part C41146). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

1FAULT2MODE13PHASE4GND5SLEEP6ENABLE7OUT+8SENSE9VBB10OUT-11CP112CP214VCP15VPROPI16MODE217GND(PPAD)
Driver_Motor:DRV8801PWPFrom KiCad's library

Footprint

123456789101112131415161717171717171717171717171717171717
Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalViasFrom KiCad's library

Pinout

17
The pins of the DRV8801PWP
PinNameType
1FAULTOpen collector
2MODE1Input
3PHASEInput
4GNDPower in
5SLEEPInput
6ENABLEInput
7OUT+Power out
8SENSEPower out
9VBBPower in
10OUT-Power out
11CP1Power in
12CP2Power in
13GNDPassive
14VCPPower in
15VPROPIOutput
16MODE2Input
17GND(PPAD)Power in

Open-source boards using it

7
  • 2 layers42.5 × 57.8 mmBiohand main board, the printed circuit board in 3D

    Biohand main board

    MartinBloedorn/biohand

    Files and documentation for the Biohand project.

    64 parts3GPL-2.0
  • 2 layers100 × 99.9 mmPcb schematic main HCU, the printed circuit board in 3D

    Pcb schematic main HCU

    HydrogreenPollub/legacy-pcb-hydrogen-cylinder

    PCB for Ecson motor driver

    123 partsMIT
  • 2 layers65 × 30 mmPowerBoard, the printed circuit board in 3D

    PowerBoard

    MartinFeichtinger/rocketpi

    A water rocket controlled by a raspberry pi zero

    29 parts
  • 2 layers30 × 30 mmRailway can, the printed circuit board in 3D

    Railway can

    nibble-arts/railway-can

    A system to control analogue model railways combining the advantages of analogue and digital.

    3 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the DRV8801PWP?

Yes. The symbol is Driver_Motor:DRV8801PWP and the footprint Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8801PWP?

HTSSOP-16-EP, with 17 pins. Its footprint is drawn on this page.

Where is the DRV8801PWP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8801PWP?

JLCPCB lists it as part C41146, with 30,481 in stock; the sellers' links on this page open their listings.

What can replace the DRV8801PWP?

Parts like it in the library: the DRV8800PWP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8801PWP?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.