
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
Ethersweep is an open-source printed circuit board by Neumi, from the Neumi/ethersweep repository on GitHub. It is a 4-layer board of 38 × 38 mm with 24 parts on 31 nets, routed with 154 tracks and 13 vias.
It is built around the TJA1051T/3/1 and R1M. Its parts include 6 connectors, 5 resistors, 4 capacitors, 2 ICs and 1 switch. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Current development files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H5, H6, H7, H8 |
| 2 | C100nF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | C22pF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | Conn_01x03_Male | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J4, J5 |
| 2 | R10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J8 |
| 1 | CAN_BUS | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J10 |
| 1 | CAN_TERMINATION | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J7 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | MCP2515-xST | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | R10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | R120 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | R1M | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-3000P | SW1 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

TheUnproductive/FrameworkHDMICaptureCard
This Project aims to bring a native HDMI Capture Card to the Framework architecture.

Asapgiri/kbb-keyboard
Keep in mind, that first the Atmega32u4 will need a bootloader, witch is programmed trough the bootloader pins. We had to program it with an Esp32-C3-mini, witches Arduino ISA codes I will upload here under the folder…


AlisonTristao/KynoWave
Dispositivo IoT para monitoramento do nivel de ruído em ambientes (2º lugar na maratona de inovação 2026/1 - Arena Ação Junior)

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

augustinzaininger/photocatalysisManagement
PCB Layouts, firmware and software for management of photocatalysis experimental system consisting of MFCs, Solenoid Valves etc

It measures 38 × 38 mm and has 4 copper layers, 1.6 mm thick.
24 parts, built around the TJA1051T/3/1 and R1M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Neumi/ethersweep repository on GitHub, at the commit this page was made from: the board is electronic_design/development/ethersweep407_CAN/ethersweep.kicad_pcb and its schematic electronic_design/development/ethersweep402/ethersweep.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Neumi before reusing the design.