
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

Motor driver is an open-source printed circuit board by Nero-198, from the Nero-198/IGBT_3phase_Driver repository on GitHub. It is a 2-layer board of 199.4 × 139.7 mm with 86 parts on 59 nets, routed with 353 tracks and 4 vias.
It is built around the TLP250(F) and 74HCT04D. Its parts include 30 resistors, 21 diodes, 18 capacitors, 7 ICs and 6 transistors. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | D | Diode_SMD:D_SMA_Handsoldering | D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 |
| 6 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C5, C6, C9, C10 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R17, R18, R23, R24 |
| 6 | 470u | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C3, C4, C7, C8, C11, C12 |
| 6 | 510 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R13, R14, R19, R20 |
| 6 | 8.2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R15, R16, R21, R22 |
| 6 | D_TVS_20V | Diode_SMD:D_SMA_Handsoldering | D4, D5, D6, D7, D8, D9 |
| 6 | Q_NIGBT_GCE | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | TLP250 | Package_DIP:DIP-8_W7.62mm_LongPads | U4, U5, U6, U7, U8, U9 |
| 6 | X | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13, C14, C15, C16, C17, C18 |
| 6 | X | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26, R27, R28, R29, R30 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Dinkle:TerminalBlock_Dinkle_DT-55-B01X-02_P10.00mm | J1, J3 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Dinkle:TerminalBlock_Dinkle_DT-55-B01X-03_P10.00mm | J2, J8 |
| 1 | 74HCT04 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |

Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

HNadeemTahir/AI_Inverter_Project
NgSpice Digital Twin of a complete off-grid solar power system: H-Bridge inverter (220V/50Hz, PI control, electro-thermal IGBT modeling) and 4kW MPPT boost converter (UC3843 analog control, KCL summing node, gate drive…


Abineshpk007/KICAD-boost-converter-gate-pulse-from-DSP-
This is my PCB, there are many outer like it but this is mine

Andy18650/GB2-2025-team4
GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4

asifahmad-namal2020/PCB_Design_Project
PCB of three phase inverter designed by Engr. Asif Ahmad


Bojtronic/TFG
Trabajo final de graduación para el grado de licenciatura en ingeniería en computadores
It measures 199.4 × 139.7 mm and has 2 copper layers, 1.6 mm thick.
86 parts, built around the TLP250(F) and 74HCT04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nero-198/IGBT_3phase_Driver repository on GitHub, at the commit this page was made from: the board is motor_driver.kicad_pcb and its schematic IGBT_Bridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Nero-198 before reusing the design.