

Quiver
Diana Dot project.
- Size
- 68.2 × 73.5 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 61
- Nets
- 73
- Pads
- 215
- Tracks, vias
- 233, 327
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Jan 2023
- Updated
- 27 Nov 2023
Overview
Quiver is an open-source printed circuit board by neoxelox, from the neoxelox/diana repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 68.2 × 73.5 mm with 61 parts on 73 nets, routed with 233 tracks and 327 vias.
It is built around the ESP32-S3-WROOM-2-N32R8V, QAM-RX10-433 and QAM-TX2-433, with the DS3231SN#T&R, LDL1117S33R and USBLC6-2SC6 among its other parts. Its parts include 19 resistors, 12 capacitors, 4 ICs, 4 transistors and 4 inductors. It belongs with the radio and wireless and home automation and IoT boards and the ESP32 boards of this library.
Main components
10ESP32-S3-WROOM-2-N32R8V
SMD-41P2.4GHz 20.5dBm ESP32-S3R8V Chip UART、SPI、I2C、I2S、USB SMD-41P WiFi Modules ROHSEspressif SystemsWiFi ModulesQAM-RX10-433
SIP-4RF ModulesRF SolutionsQAM-TX2-433
DIP-4RF ModulesRF SolutionsDS3231SN#T&R
SOIC-16-300mil-40℃~+85℃ 0.84uA 2.3V~5.5V 200uA Built-in I2C Temperature compensation、Programmable clock output、Alarm function Yes SOIC-16-300mil Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksLDL1117S33R
SOT-223-4-40℃~+125℃@(Tj) 1 1.2A 18V 3.3V 500uA 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Over Current Protection、Thermal Shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BC847B
SOT-23-65℃~+150℃ 1 NPN 100MHz 100mA 200 200mV 250mW 45V 5uA 6V NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedMF-MSMF075/24-2
1812-40℃~+85℃ 110mΩ 24V 3.2mm 40A 450mΩ 5.4mm 800mW 1812 Resettable Fuses ROHSBournsResettable FusesUSB4085-GF-A
插件-40℃~+85℃ 1 48V 5A Black Female Right Angle Type-C USB 2.0 插件 USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mddiana
Diana Dot project.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C12 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R9, R12, R13, R14 |
| 4 | BC847B | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 3 | 0R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C11 |
| 3 | 330R | Resistor_SMD:R_0805_2012Metric | R17, R18, R19 |
| 3 | 5K1 | Resistor_SMD:R_0805_2012Metric | R4, R5, R10 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R6, R11 |
| 2 | 12nH | Inductor_SMD:L_0805_2012Metric | L1, L3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C9 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 6.8nH | Inductor_SMD:L_0805_2012Metric | L2, L4 |
| 2 | KMR421G-LFS | Switch_KMR:KMR421G-LFS | SW1, SW2 |
| 2 | XDCR_W3127 | CU_Antenna:W3127 | AE1, AE2 |
| 1 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | CLX6F-FKC | LED_CREE:CLX6F-FKC | D3 |
| 1 | DS3231SN | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U4 |
| 1 | ESP32-S3-WROOM-2-N32R8V | RF_Espressif:ESP32-S3-WROOM-2 | U3 |
| 1 | G*** | kibuzzard-6373EBEE | kibuzzard-6373EBEE |
| 1 | G*** | kibuzzard-6373EB20 | kibuzzard-6373EB20 |
| 1 | G*** | kibuzzard-6373EA89 | kibuzzard-6373EA89 |
| 1 | LDL1117S33R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LOGO | CU_Image:logo | G*** |
| 1 | MF-MSMF075/24 | CU_Polyfuse:MF-MSMF075-24 | F1 |
| 1 | MP008293 | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | QAM-RX10 | RF_Quasar:QAM-RX10 | RF2 |
| 1 | QAM-TX2 | RF_Quasar:QAM-TX2 | RF1 |
| 1 | USB4085 | Connector_GCT:GCT_USB4085 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
More from neoxelox/diana
2- 2 layers30 × 8.5 mm

- 2 layers11.6 × 13 mm

Similar boards
- 2 layers

RC KiCAD
dev-campusfab/FabRice
Documentation et code source de FabRice, le robot Autonome.
62 parts4MIT - 4 layers89 × 57 mm

- 2 layers100 × 55 mm

- 2 layers30.5 × 20.3 mm

- 2 layers145 × 75 mm

- 2 layers134 × 88 mm

Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 2 layers120 × 103.9 mm

Remote omnidirection droid v0.1
eloicote/remote_omnidirectional_droid
ESP32 based freemoving drone with a camera for FPV which utilizes three omniwheels in a delta formation to move freely in 3 dimensions
85 partsGPL-3.0 - 4 layers150 × 100 mm

Power profiler carrier
Guiimartinho/open-power-profiler
Open-source PPK2-class power profiler built on the Raspberry Pi Pico 2: 100 kSPS, 100 nA to 1 A auto-ranging, source meter and ampere meter modes, USB stream.
425 partsMIT
Questions
How big is the Quiver PCB?
It measures 68.2 × 73.5 mm and has 2 copper layers, 1.69 mm thick.
What parts does the Quiver use?
61 parts, built around the ESP32-S3-WROOM-2-N32R8V, QAM-RX10-433, QAM-TX2-433 and DS3231SN#T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quiver KiCad files?
From the neoxelox/diana repository on GitHub, at the commit this page was made from: the board is res/kcd/quiver/quiver.kicad_pcb and its schematic res/kcd/custom/quasar/projects/QAM-RX10/QAM-RX10.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quiver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).