Skip to the content
2 layers100 × 100 mmG1000-partial panel, the printed circuit board in 3D

G1000-partial panel

neilenns/G1000-partial-panel

Example using KiCad 9 template

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
18
Pads
21
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
11 Oct 2025
Updated
24 Oct 2025

Overview

G1000-partial panel is an open-source printed circuit board by neilenns, from the neilenns/G1000-partial-panel repository on GitHub. It is a 2-layer board of 100 × 100 mm with 5 parts on 18 nets.

It is built around the 74HC595D. Its parts include 1 resistor and 1 IC.

Main components

1

README

README.md

G1000-partial-panel

This generated project is ready for use with KiCad 9. It includes the necessary GitHub workflows to create output files for JLCPCB fabrication when a release is created in GitHub. The project is intended to be used with the amazing JLCPCB KiCad library.

It also includes a devcontainer to enable local production of the output files using the same environment as the GitHub workflows. To create the output, run the following command:

bash
mkdir -p release/JLCPCB
kicad-cli jobset run --file jobs.kicad_jobset "G1000-partial-panel.kicad_pro"

Note that the output will not include the post-processing steps done by the GitHub workflow to prepare the BOM and POS files for JLCPCB.

After a release the repo will be updated with top and bottom board images in the docs/ folder. These can be inserted into the README.md if desired.

Variables

The following variables are available for use in the project:

  • VERSION: The version of the project, pulled from the GitHub release version and short SHA hash.
  • DATE: The date of the release in YYYY-MM-DD format.

Parts

5
QtyValueFootprintReferences
3~PCM_JLCPCB:Hole_Tooling_JLCPCBH1, H2, H3
110kΩPCM_JLCPCB:R_0402R1
174HC595DPCM_JLCPCB:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BLU1

Similar boards

  • 2 layers208 × 58 mmPOV LED, the printed circuit board in 3D

    POV LED

    Circuit-Digest/POV-Display

    DIY POV Display Tutorial using ESP32 Arduino

    326 parts34
  • 4 layers84 × 62 mmQuad AMBE3000, the printed circuit board in 3D

    Quad AMBE3000

    m1geo/Quad-AMBE3000

    A PCB for four DVSI AMBE-3000R Vocoders for use with WebSDRs/Audio transcoding

    200 parts19MIT
  • 2 layers75 × 30 mmShift register breakout pcb, the printed circuit board in 3D

    Shift register breakout pcb

    christrotter/shift-register-spi-breakout-pcb

    Simple breakout board that gets you 16 rows and 16 cols for your QMK matrix.

    29 parts13MIT
  • 6 layers499.5 × 326 mmOLD obfuscated DontUse link, the printed circuit board in 3D

    OLD obfuscated DontUse link

    Jeo0/atg-client

    automatic trajectory generator cross-platform client for acoustic volumetric displays (dis our thesis :))

    548 parts3
  • 4 layers92.3 × 99.8 mmBccc sao rp2350a, the printed circuit board in 3D

    Bccc sao rp2350a

    aerospace-venoms/BCCC_Temperature_SAO

    Source files for reconstructing the Beverage Chilling Contraption Contest badge, released at Defcon 2026

    109 parts1
  • 4 layers40.3 × 57.1 mmPrimary Board, the printed circuit board in 3D

    Primary Board

    agonzalez85/Pulse_Oximeter_Project

    Pulse Oximeter Capstone Project

    132 parts1
  • 2 layers350 × 235 mmDogrudan sdr C, the printed circuit board in 3D

    Dogrudan sdr C

    kocer/direct-sampling-sdr

    Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.

    406 parts1
  • 2 layers97.2 × 60 mmRobomas Controller board, the printed circuit board in 3D

    Robomas Controller board

    ar216-2355/Robomas_Controller_board

    stm32 cube ide の G474robomascontroller パッケージ と合わせて使う想定

    125 parts

Questions

How big is the G1000-partial panel PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the G1000-partial panel use?

5 parts, built around the 74HC595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the G1000-partial panel KiCad files?

From the neilenns/G1000-partial-panel repository on GitHub, at the commit this page was made from: the board is projects/G1000-partial-panel/G1000-partial-panel.kicad_pcb and its schematic projects/G1000-partial-panel-2/G1000-partial-panel-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the G1000-partial panel design in my own project?

Its repository states no licence, so its author keeps all rights: ask neilenns before reusing the design.