
Stm32
baszdr/STM32_NEXT_PCB_PROJECT
Designed a compact embedded system integrating USB-C, power management, and RF design into a single 4-layer PCB. Focused on clean layout, strong signal integrity, and practical debugging structure.

STM32 Based wifi bt module PCB
STM32 WB is an open-source printed circuit board by nebasis, from the nebasis/STM32_WB repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 42.3 × 21.5 mm with 41 parts on 53 nets, routed with 304 tracks and 52 vias.
It is built around the MIC5365-3.3YD5-TR and USBLC6-2SC6. Its parts include 19 capacitors, 7 resistors, 4 connectors, 3 inductors and 2 ICs. It belongs with the radio and wireless boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C8, C10, C16, C17 |
| 7 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C7, C9, C11, C12, C13, C18, C19 |
| 3 | 100 | Inductor_SMD:L_0402_1005Metric | R2, R5, R6 |
| 3 | 5k1 | Inductor_SMD:L_0402_1005Metric | R1, R3, R4 |
| 1 | 0p3 | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 0p8 | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 220 | Inductor_SMD:L_0402_1005Metric | R7 |
| 1 | 2n7 | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 32K768 | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y2 |
| 1 | 32MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J4 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
| 1 | LED_SMD_1W_3W_Amber | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
| 1 | LPF | DLF162500LT-5028A1:FLT_2G4-2G5 | FLT1 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:TSOT-23-5 | U2 |
| 1 | STM32WB55CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW1 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | USBLC6-2SC6 | PCM_Package_TO_SOT_SMD_AKL:SOT-23-6 | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |

baszdr/STM32_NEXT_PCB_PROJECT
Designed a compact embedded system integrating USB-C, power management, and RF design into a single 4-layer PCB. Focused on clean layout, strong signal integrity, and practical debugging structure.



OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube

shivamtiwari020505/stm32wb55-ble-dev-board
Custom STM32WB55 development board integrating 2.4GHz BLE 5.x, LPUART, I2C, and UART via RS232/DB9 for PC and industrial machine interfacing. Designed to bridge modern wireless IoT with legacy wired systems.


arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator

ashfaque-ur-rahman/STM32WB-RF-PCB-Design
STM32 microcontroller PCB design with RF capability —4 layer Board —KiCad project based on Phil's Lab tutorial series
It measures 42.3 × 21.5 mm and has 4 copper layers, 1.58 mm thick.
41 parts, built around the MIC5365-3.3YD5-TR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nebasis/STM32_WB repository on GitHub, at the commit this page was made from: the board is STM32_WB.kicad_pcb and its schematic STM32_WB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).