2 layers120 × 100 mm
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT
2 layers62.5 × 50.5 mm
TurroBOT
NatuRosen/TurroBOT- Size
- 62.5 × 50.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 38
- Pads
- 81
- Tracks, vias
- 160, 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Dec 2024
- Updated
- 6 Dec 2024
Overview
TurroBOT is an open-source printed circuit board by NatuRosen, from the NatuRosen/TurroBOT repository on GitHub. It is a 2-layer board of 62.5 × 50.5 mm with 12 parts on 38 nets, routed with 160 tracks and 6 vias.
It is built around the ROB-14450. Its parts include 4 connectors, 2 ICs, 2 diodes, 2 switches and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Motor2 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J4, J6 |
| 1 | 180 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.00mm:PinHeader_1x10_P2.00mm_Vertical | J3 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | ROB-14450 | ROB-14450:MODULE_ROB-14450 | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW2 |
| 1 | YAAJ_DCDC_StepUp_SX1308 | KiCad:YAAJ_DCDC_StepUp_SX1308 | U1 |
| 1 | molex macho 2P | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J5 |
Questions
How big is the TurroBOT PCB?
It measures 62.5 × 50.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TurroBOT use?
12 parts, built around the ROB-14450. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TurroBOT KiCad files?
From the NatuRosen/TurroBOT repository on GitHub, at the commit this page was made from: the board is TurroBOT/TurroBOT.kicad_pcb and its schematic TurroBOT/TurroBOT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TurroBOT design in my own project?
Its repository states no licence, so its author keeps all rights: ask NatuRosen before reusing the design.
Similar boards
- 2 layers102.6 × 82 mm
Fun
bonavirak/Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM).
38 parts11MIT - 2 layers42 × 42 mm
ControllerBoardSingle v1
0x23/BallJointEmbossingMachine
A motorized linear embossing machine designed to precisely press ball joints. It was designed to automate the production of balljoint linkages for the Open-Micro-Manipulator.
20 parts9MIT - 2 layers90 × 102 mm
- 4 layers156.8 × 127 mm
Payload PCB v3.1
team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam
197 parts2BSD-3-Clause - 2 layers100 × 70.9 mm
- 2 layers75.6 × 50.2 mm
- 2 layers87.2 × 93.9 mm
