2 layers55 × 100 mm
2 layers100 × 70.9 mm
LineFollowerRCX
Artrobots-Inteli/RCX1- Size
- 100 × 70.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 40
- Pads
- 83
- Tracks, vias
- 132, 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 May 2024
- Updated
- 12 Oct 2024
Overview
LineFollowerRCX is an open-source printed circuit board by Artrobots-Inteli, from the Artrobots-Inteli/RCX repository on GitHub. It is a 2-layer board of 100 × 70.9 mm with 13 parts on 40 nets, routed with 132 tracks and 8 vias.
It is built around the ROB-14450 and EG1213. Its parts include 8 connectors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdRCX
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Motor 1 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A2 |
| 1 | Conector sensor lateral Direita | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J8 |
| 1 | Conector sensor lateral Esquerda | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7 |
| 1 | Conn_01x11_Pin | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J1 |
| 1 | EG1213 | EG1213:SW_EG1213 | S1 |
| 1 | Entrada bateria | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | Bateria1 |
| 1 | GND pinos | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J10 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | Modulo bluetooth | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | ROB-14450 | ROB_14450:MODULE_ROB-14450 | U1 |
| 1 | VCC pinos | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J9 |
Questions
How big is the LineFollowerRCX PCB?
It measures 100 × 70.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LineFollowerRCX use?
13 parts, built around the ROB-14450 and EG1213. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LineFollowerRCX KiCad files?
From the Artrobots-Inteli/RCX repository on GitHub, at the commit this page was made from: the board is KicadProject/LineFollower Project - RCX/LineFollowerRCX/LineFollowerRCX.kicad_pcb and its schematic KicadProject/LineFollower Project - RCX/LineFollowerRCX/LineFollowerRCX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LineFollowerRCX design in my own project?
Its repository states no licence, so its author keeps all rights: ask Artrobots-Inteli before reusing the design.
Similar boards
- 2 layers99.9 × 43.2 mm
- 2 layers54.8 × 54.7 mm
- 2 layers104.1 × 67.1 mm
BarometricPressureSensor
cdennis3223/BarometerArray
Capstone Project in collaboration with Sam Bower, Utilizing ESP32 controlled devices to measure fast changing barometric pressure in an arrayed pattern with time correlated data.
44 parts1 - 2 layers63.5 × 22.9 mm
9v battery to usb
lalmiAhmed/9v_battery_to_usb
pcb design fork for the cold power usb charger
12 parts1 - 2 layers104.1 × 168.4 mm
- 2 layers140 × 64.8 mm
Console hardware
ECE411-Practicum-Group11/ECE411-PracticumProject-G11
Fall 2022 ECE 411 Practicum Project for Group 11
68 partsCC0-1.0 - 2 layers80.8 × 55.4 mm
Apple-68k FujiNet Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
28 parts142