Skip to the content
4 layers24pin module, the printed circuit board in 3D

ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

Copper layers
4
Thickness
1.6 mm
Parts
69
Nets
85
Pads
346
Tracks, vias
28, 0
Pours
5
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 May 2026
Updated
6 Nov 2026

Overview

24pin module is an open-source printed circuit board by nathanfraske, from the nathanfraske/CEC-Platform repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board with 69 parts on 85 nets, routed with 28 tracks and 0 vias.

It is built around the ESP32-C6-MINI-1-N4, TJA1051T/3 and INA238AIDGSR, with the INA181A2IDBVR(LX), LP5907MFX-3.3 and TPS2121RUXR among its other parts. Its parts include 19 capacitors, 12 resistors, 12 ICs, 5 connectors and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.

Main components

12

README

beta/hub-standard-rev2/candidate/README.md

candidate/: the current best diagnostic board for this module

ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

<board>-candidate.kicad_pcb (+ its .kicad_pro / .kicad_dru sidecars) is a COPY of the best board the wave has ever published for this module, with candidate.json recording where it came from and how it graded. Open it to see the real current state of the layout without digging through build/fresh-wave-*/.

IMPORTANT: candidate/ is a diagnostic-reference channel, not a release-acceptance channel. A routed board remains here when its route gate fails so reviewers can see and improve the best failure. candidate.json therefore records candidate_role: diagnostic-reference, release_accepted: false, and the distinct route_gate_passed result. Only the aggregate release pipeline may accept a board.

RULES the wave enforces on every publish:

  • SCHEMATIC FRESHNESS outranks score: a winner matching more of the CURRENT component signatures replaces the reference even on a worse score, and a staler board never replaces a fresher one. The signature covers value, footprint, and numbered-pad nets. schematic_match and schematic_exact in candidate.json record the result. A board that grades well but predates a schematic or footprint change is the worse reference;
  • otherwise it replaces this file only when the new winner BEATS the recorded sort_key (lower is better -- the same ranking the wave itself uses);
  • a board satisfying the CURRENT segmented-mezzanine geometry replaces one that violates it, independent of route score; an obsolete mechanical datum is stale in the same way an obsolete component signature is stale;
  • a routed winner always beats a placement-only one, and a placement-only winner NEVER overwrites a routed reference;
  • exactly one .kicad_pcb lives here -- stale board files are pruned.

candidate.json is also refreshable without publishing a board. Consumers that use a candidate as a placement oracle or materialization template MUST require schematic_exact: true after a current refresh. A stale candidate remains useful for historical outline, connector, mount, and copper review, but it is not a component-inventory or pin/net authority.

This is a REFERENCE, not the board of record: it is machine-written, so never hand-edit it (edits are silently overwritten by the next better wave). The authoritative schematic + the module's own project files stay in the parent directory.

Parts

69
QtyValueFootprintReferences
13100nFcec-Capacitor_SMD:C_0402_1005MetricC3, C4, C5, C8, C10, C11, C12, C13, C60, C65V1, C75V1, C612V1, C712V1
4INA238cec-Package_SO:VSSOP-10_3x3mm_P0.5mmU10, U11, U12, U13
4XFCN T34069cec-Connector_Screw:XFCN_T34069_THT_M3_40ATB1, TB2, TB4, TB5
310kΩcec-Resistor_SMD:R_0402_1005MetricR2, R51, R60
310uFcec-Capacitor_SMD:C_0805_2012MetricC6, C7, C9
32.2kΩcec-Resistor_SMD:R_0402_1005MetricR1, R3, R4
32mΩcec-Resistor_SMD:R_2512_6332MetricRS1, RS2, RS3
20Ωcec-Resistor_SMD:R_0402_1005MetricR_BYP_H1, R_BYP_L1
2100kΩcec-Resistor_SMD:R_0402_1005MetricR7, R52
21uFcec-Capacitor_SMD:C_0603_1608MetricC1, C2
25.1kΩcec-Resistor_SMD:R_0402_1005MetricR8, R9
2INA181A2IDBVRcec-Package_TO_SOT_SMD:SOT-23-6U65V1, U612V1
2PESD5V0S1BAcec-Diode_SMD:D_SOD-323D1, D7
2TLV7011DBVRcec-Package_TO_SOT_SMD:SOT-23-5U75V1, U712V1
2TTR32100127-0600cec-Connector_Screw:XFCN_TTR32100127-0600_THT_M3_60ATB6, TB9
10R (FB position, populate on EMC evidence)cec-Capacitor_SMD:C_0805_2012MetricFB2
120kΩcec-Resistor_SMD:R_0402_1005MetricR50
125mΩcec-Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T1.19mmRS4
12u2cec-Capacitor_SMD:C_0402_1005MetricC50
133kΩcec-Resistor_SMD:R_0402_1005MetricR53
1600R@100MHz FB (MPZ2012S601AT000)cec-Capacitor_SMD:C_0805_2012MetricFB1
1ATX-24 PSUcec-Connector_Molex:Molex_Mini-Fit_Jr_5569-24A1_2x12_P4.20mm_HorizontalJ3
1BOOTcec-Button_Switch_SMD:TS-1088-AR02016SW1
1ESP32-C6-MINI-1-N4cec-RF_Module:ESP32-C6-MINI-1U1
1LP5907MFX-3.3cec-Package_TO_SOT_SMD:SOT-23-5U3
1RESETcec-Button_Switch_SMD:TS-1088-AR02016SW2
1SS34cec-Diode_SMD:D_SMAD2
1SSQ-102-03-G-Dcec-Connector_PinSocket_2.54mm:Samtec_SSQ-102-03-G-D_2x02_P2.54mm_VerticalJ_SIG1
1TJA1051T/3cec-Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1TO-HUBcec:RJ45_FTP_Shielded_HorizontalJ1
1TO-HUB-PWRcec-Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ2
1TO-HUB-STACKcec-Connector_PinHeader_2.00mm:PinHeader_2x08_P2.00mm_VerticalJ6
1TPS2121RUXRcec-Package_DFN_QFN:RUX0012AU5
1USB-C 2.0cec-Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J5
1USBLC6-2SC6cec-Package_TO_SOT_SMD:SOT-23-6D_USB1

More from nathanfraske/CEC-Platform

12
  • 6 layers78 × 89.5 mmAtx-24pin rev3, the printed circuit board in 3D

    Atx-24pin rev3

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    129 partsApache-2.0
  • 6 layers84.5 × 72.2 mmHub standard rev2, the printed circuit board in 3D

    Hub standard rev2

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    117 partsApache-2.0
  • 6 layers86 × 74 mmHub standard rev2-candidate, the printed circuit board in 3D

    Hub standard rev2-candidate

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    115 partsApache-2.0
  • 6 layers58 × 72 mm12vhpwr standard, the printed circuit board in 3D

    12vhpwr standard

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    110 partsApache-2.0
  • 4 layers98 × 74 mmHub standard, the printed circuit board in 3D

    Hub standard

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    91 partsApache-2.0
  • 4 layers96 × 40.6 mmEps-8pin candidate, the printed circuit board in 3D

    Eps-8pin candidate

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    77 partsApache-2.0
  • 6 layers86.5 × 47.6 mmPcie-8pin-2port candidate, the printed circuit board in 3D

    Pcie-8pin-2port candidate

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    75 partsApache-2.0
  • 6 layers88 × 40 mmEps-8pin rev3, the printed circuit board in 3D

    Eps-8pin rev3

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    68 partsApache-2.0
  • 4 layers78 × 28.3 mmEps8pin module, the printed circuit board in 3D

    Eps8pin module

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    58 partsApache-2.0
  • 4 layers82.9 × 79 mm24pin module, the printed circuit board in 3D

    24pin module

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    49 partsApache-2.0
  • 4 layers86.4 × 44 mmPcie2-inrow, the printed circuit board in 3D

    Pcie2-inrow

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    48 partsApache-2.0
  • 4 layers59.8 × 21.3 mmAtx24-out db board, the printed circuit board in 3D

    Atx24-out db board

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    8 partsApache-2.0

Similar boards

  • 2 layers77.5 × 100 mmRover pdb, the printed circuit board in 3D

    Rover pdb

    devkyber/PCB

    AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.

    93 parts
  • 2 layers83.3 × 48 mmHaptic wheel pcb, the printed circuit board in 3D

    Haptic wheel pcb

    ianfm/foc-driver-pcb

    BLDC driver aimed at FOC motor control

    55 parts
  • 4 layers55 × 52 mmKali tank sensor v3, the printed circuit board in 3D

    Kali tank sensor v3

    eburi/wireless-tank-sensor

    ESPHome/BTHome based wireless tank sensor.

    22 partsMIT
  • 2 layers75 × 55 mmWellfed bench, the printed circuit board in 3D

    Wellfed bench

    Isaac-Duarte/wellfed

    Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.

    93 parts8MIT
  • 4 layers90 × 60 mmBench psu, the printed circuit board in 3D

    Bench psu

    PaulBichl/VibePCB-bench-psu

    USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.

    206 parts1
  • 2 layers57.5 × 42.8 mmBlack Body Heater Control, the printed circuit board in 3D

    Black Body Heater Control

    DylanLockyer/Black_Body

    Electrical system for black body MKID tester

    52 parts1MIT
  • 6 layers91.6 × 50.6 mmSmokebreak, the printed circuit board in 3D

    Smokebreak

    offgridevices/offgrid-hardware

    Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.

    208 partsCERN-OHL-S-2.0
  • 2 layers64.3 × 24.5 mmIntercom, the printed circuit board in 3D

    Intercom

    tylerreckart/arthur

    A silicon assistant.

    62 parts

Questions

What parts does the 24pin module use?

69 parts, built around the ESP32-C6-MINI-1-N4, TJA1051T/3, INA238AIDGSR and INA181A2IDBVR(LX). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 24pin module KiCad files?

From the nathanfraske/CEC-Platform repository on GitHub, at the commit this page was made from: the board is beta/atx-24pin-rev3/24pin-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 24pin module design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).