

VESC-6-MK5
- Size
- 104.8 × 114.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 154
- Nets
- 138
- Pads
- 605
- Tracks, vias
- 1,799, 413
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Dec 2023
- Updated
- 30 Apr 2024
Overview
VESC-6-MK5 is an open-source printed circuit board by nathancritchfield, from the nathancritchfield/senior_project repository on GitHub. It is a 4-layer board of 104.8 × 114.2 mm with 154 parts on 138 nets, routed with 1,799 tracks and 413 vias.
It is built around the DRV8301DCA, BMI160 and TC2117-3.3VEBTR, with the TJA1051TK/3/1 and DMN62D0UW-7-HXY among its other parts. Its parts include 59 capacitors, 47 resistors, 15 ICs, 11 connectors and 9 diodes. It belongs with the STM32 boards of this library.
Main components
5DRV8301DCA
HTSSOP-56-EP-6mm-40℃~+125℃ 1.7A 2.3A 25ns 25ns 6 6V~60V Half-Bridge、Three Phase MOSFET Under Voltage Protection、Over Voltage Protection、Over Current Protection、Overtemperature protection (OTP) HTSSOP-56-EP-6mm Gate Drivers ROHSTexas InstrumentsBrushless DC (BLDC) Motor DriverBMI160
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 10uA 16bit 1KB IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersTC2117-3.3VEBTR
D2PAK-3-40℃~+125℃@(Tj) 1 1.3V@(800mA) 130uA 3.3V 55dB@(1kHz) 6V 800mA Fixed Over Current Protection、Over Temperature Protection Positive D2PAK-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTJA1051TK/3/1
-UncategorisedNXP SemiconductorsDMN62D0UW-7-HXY
SOT-323SOT-323 MOSFETs ROHSHXY MOSFETMOSFETs
Parts
154| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 2.2u | DRV8301_:CAPC1608X90N | C3, C4, C10, C11, C12, C13, C14, C15, C17, C20, C31, C33, C34, C35, C36, C38 +8 |
| 7 | 100n | MCU_:0603_AVX | C7, C28, C49, C55, C57, C58, C59 |
| 7 | 4.7u_100V | DRV8301_:CAPC3216X190N | C27, C37, C39, C40, C41, C43, C44 |
| 6 | 1k | Root_:RESC3216X70N | R5, R7, R35, R36, R37, R38 |
| 6 | 4.7R | DRV8301_:RESC1608X55N | R25, R26, R30, R31, R33, R34 |
| 6 | IRF7749 | Power_:DIRECTFET_L8_INF | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | , , , | ||
| 4 | 10k | DRV8301_:RESC1608X55N | R13, R28, R39, R48 |
| 4 | 15n | DRV8301_:CAPC340180_88N_KEM | C22, C52, C53, C54 |
| 4 | 220R | Root_:RESC3216X75N | R8, R9, R23, R47 |
| 4 | 2k2 | DRV8301_:RESC1608X55N | R16, R18, R20, R22 |
| 4 | D_Schottky | Root_:CFP3_SOD123W_NEX | D4, D7, D8, D9 |
| 3 | 0.0005R | Power_:RES_WSLP2726L5000FEA | R24, R29, R32 |
| 3 | 1n | Power_:CAPC2012X88N | C29, C30, C45 |
| 3 | 220n | DRV8301_:CAPC1608X90N | C23, C24, C25 |
| 3 | 2k2 | Root_:RESC2012X60N | R42, R43, R44 |
| 3 | 39k 60V | DRV8301_:RESC6332X70N | R17, R19, R21 |
| 3 | AD8418 | Power_:SOP65P490X110-8N | U5, U6, U7 |
| 3 | MC74VHC1GT66 | Power_:SC-88A_ONS | U10, U12, U13 |
| 3 | MC74VHC1GT66DF1G | Power_:SC-88A_ONS | U14, U15, U16 |
| 2 | 100u | DRV8301_:CAP_TPS1210_3P5X2P8_AVX | C21, C32 |
| 2 | 15p | MCU_:CAP_0402C_AVX | C2, C8 |
| 2 | 1k PTC | DRV8301_:RESC1608X55N | R45, R46 |
| 2 | 22R | Root_:RESC3216X70N | R2, R3 |
| 2 | 39k | DRV8301_:RESC1608X55N | R15, R41 |
| 2 | 680u_63V | Power_:CAPPRD500W80D1250H3500 | C46, C47 |
| 1 | 0R | DRV8301_:RESC1608X55N | R1 |
| 1 | 100R | Root_:RES_RK73H2A_KOA | R6 |
| 1 | 100n | Power_:CAPC2012X88N | C1 |
| 1 | 120p | DRV8301_:CAP_0603G_AVX | C18 |
| 1 | 15k | DRV8301_:RESC1608X55N | R12 |
| 1 | 18k | DRV8301_:RESC1608X55N | R11 |
| 1 | 220k | DRV8301_:RESC1608X55N | R14 |
| 1 | 22n | DRV8301_:CAPC10555_55N_KEM | C19 |
| 1 | 22u | DRV8301_:IND_BOURNS_SDR0805 | L2 |
| 1 | 3.3k | DRV8301_:RESC1608X55N | R10 |
| 1 | 3.6V | Root_:SOD-882_TOS | D10 |
| 1 | 4.7u_100v | DRV8301_:CAPC3216X190N | C26 |
| 1 | 56k | DRV8301_:RESC1608X55N | R40 |
| 1 | 6.8n | DRV8301_:CAP_C0805C-GEC-DG_KEM | C16 |
| 1 | 8M | MCU_:XTAL_ABM3B-8.000MHZ-10-1-U-T | Y1 |
| 1 | BLUE | Root_:LED_LTST-C191KRKT_LTO | D1 |
| 1 | BMI160 | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U9 |
| 1 | CAN | Root_:JST_B4B-PH-SM4-TB__LF__SN_ | P2 |
| 1 | COMM | Root_:JST_B8B-PH-SM4-TB_LF__SN_ | P5 |
| 1 | DMN62D0UW-7 | DRV8301_:SOT323_DMN62D0UV_DIO | Q7 |
| 1 | DRV8301DCA | DRV8301_:SOP50P810X120-57N | U3 |
| 1 | GND | Power_:8x8mm Solder Pad | P12 |
| 1 | GREEN | Root_:LED_LTST-C191KGKT_LTO | D3 |
| 1 | HALL_ENC | Root_:CONN_S6B-PH-SM4-TBLFSN_JST | P4 |
| 1 | NTC 10K | DRV8301_:RESC1608X55N | R27 |
| 1 | PH_A | Power_:8x8mm Solder Pad | P8 |
| 1 | PH_B | Power_:8x8mm Solder Pad | P9 |
| 1 | PH_C | Power_:8x8mm Solder Pad | P10 |
| 1 | RED | Root_:LED_LTST-C191KRKT_LTO | D2 |
| 1 | SENSOR_VOLTAGE | Root_:SW_PCM12SMTR | U11 |
| 1 | SERVO | Root_:CONN_B3B-PH-SM4-TB_JST | P6 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SUPPLY | Power_:8x8mm Solder Pad | P11 |
| 1 | SWD | Root_:CONN5_4-TBLFSN_JST | P7 |
| 1 | TC2117-3.3VEBTR | DRV8301_:TO254P1491X483-4N | U8 |
| 1 | TJA1051TK-3 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U4 |
| 1 | TVS 5V | DRV8301_:DIOM4325X250N | D5 |
| 1 | USB_OTG | Root_:CONN_S6B-PH-SM4-TBLFSN_JST | P1 |
More from nathancritchfield/senior_project
2- 2 layers70.2 × 46.7 mm

- 2 layers38.5 × 35.7 mm

Similar boards
- 4 layers75 × 41 mm

- 4 layers62 × 60 mm

- 4 layers110 × 45 mm

VESC6 OPEN HARDWARE
duwogus7650-ctrl/Controller-Board-Design
QDD용 Ø52 원형 VESC6 파생 모터 컨트롤러 설계 (DRV8323RS 60V급)
131 parts - 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407 - 2 layers29 × 15 mm

Mav led driver
LTU-RAI/mav_led_driver
Constant current LED driver with camera flash sync and over-current protection
49 parts1 - 4 layers85 × 68 mm

- 4 layers34.5 × 56 mm

- 2 layers100 × 60 mm

Cheap focer clone
duwogus7650-ctrl/board-design
OpenRobot SPN-MC(=VESCular6, VESC6 파생) 동등 기능의 QDD용 원형 모터 컨트롤러를 오픈소스 VESC6를 베이스로 신규 설계하는 프로젝트.
36 parts
Questions
How big is the VESC-6-MK5 PCB?
It measures 104.8 × 114.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the VESC-6-MK5 use?
154 parts, built around the DRV8301DCA, BMI160, TC2117-3.3VEBTR and TJA1051TK/3/1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VESC-6-MK5 KiCad files?
From the nathancritchfield/senior_project repository on GitHub, at the commit this page was made from: the board is Hardware/VESC-6-MK5_KiCad/VESC-6-MK5.kicad_pcb and its schematic Hardware/Receiver_KiCad/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VESC-6-MK5 design in my own project?
Its repository states no licence, so its author keeps all rights: ask nathancritchfield before reusing the design.