
Mosfets
abd-alaj/BLDC-motor-custom-inverter
Matlab, Simulink, Hardware and C-code for a custom inverter project.

Constant current LED driver with camera flash sync and over-current protection
Mav led driver is an open-source printed circuit board by LTU-RAI, from the LTU-RAI/mav_led_driver repository on GitHub. It is a 2-layer board of 29 × 15 mm with 49 parts on 31 nets, routed with 310 tracks and 82 vias.
It is built around the L78L33ACUTR, DMN62D0UW-7-HXY and SSM3J351R,LF. Its parts include 19 resistors, 14 capacitors, 6 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
A simple LED driver intended for use on Micro Aerial Vehicles (MAV), where the minimum LED forward voltage should be 20V, and max 50V, by having multiple panels in series. The PCB design is made so it can be used as a module to be soldered on another PCB.
Design specifications:
List of contributors in alphabetical order:
The hardware is OSHW using the Cern-OHL license.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | passive:C_0603 | C103, C104, C105, C106, C107, C108, C109, C111 |
| 6 | 10k | passive:R_0603 | R102, R103, R107, R112, R116, R117 |
| 5 | 33k | passive:R_0603 | R105, R108, R110, R113, R115 |
| 4 | 470 | passive:R_0603 | R101, R109, R114, R118 |
| 4 | Conn_01x01_Male | connectors:pad_3.0x2.0mm_castelated | J101, J102, J104, J105 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C102, C110, C112 |
| 3 | 309k | passive:R_0603 | R104, R106, R111 |
| 2 | 6.8n | passive:C_0603 | C113, C114 |
| 1 | 0.5 | Resistor_SMD:R_1206_3216Metric | R119 |
| 1 | 22u | inductor:ASPI-0630LR | L101 |
| 1 | 3A, 60V | Diode_SMD:D_SMA | D101 |
| 1 | 4.7u | passive:C_0603 | C101 |
| 1 | 8.2V | Diode_SMD:D_SOD-323 | D103 |
| 1 | Conn_01x01_Male | connectors:pad_1.5x2.5mm_castelated | J103 |
| 1 | Conn_01x04_Male | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J106 |
| 1 | DMN62D0UW-7 | sot:SOT-323 | Q101 |
| 1 | L78L33ACUTR | Package_TO_SOT_SMD:SOT-89-3 | U101 |
| 1 | MP3425 | Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm | U102 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | SSM3J351R,LF | sot:SOT-23 | Q102 |
| 1 | STM32F051K4Ux | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U103 |
| 1 | SolderJumper_2_Open | solder_jumpers:solder_jumper_0.7mm | JP101 |

abd-alaj/BLDC-motor-custom-inverter
Matlab, Simulink, Hardware and C-code for a custom inverter project.



jjCSE113NMT/dsp-neutron-spectrometer
A place to keep all our material related to our senior design project.


Talw3g/ctahr_board
New repo for the revB of the "cave" board made on Eagle in 2016 (https://github.com/Talw3g/elec/tree/master/projects/cave).


It measures 29 × 15 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the L78L33ACUTR, DMN62D0UW-7-HXY and SSM3J351R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LTU-RAI/mav_led_driver repository on GitHub, at the commit this page was made from: the board is mav_led_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LTU-RAI before reusing the design.