
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
Texas InstrumentsExtended
-40℃~+125℃ 1.7A 2.3A 25ns 25ns 6 6V~60V Half-Bridge、Three Phase MOSFET Under Voltage Protection、Over Voltage Protection、Over Current Protection、Overtemperature protection (OTP) HTSSOP-56-EP-6mm Gate Drivers ROHS
The DRV8301DCA is a brushless DC (BLDC) Motor Driver made by Texas Instruments in a HTSSOP-56-EP-6mm package with 57 pins. -40℃~+125℃ 1.7A 2.3A 25ns 25ns 6 6V~60V Half-Bridge、Three Phase MOSFET Under Voltage Protection、Over Voltage Protection、Over Current Protection、Overtemperature protection (OTP) HTSSOP-56-EP-6mm Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:DRV8301DCA, from CERN's library) and its footprint (ICs And Semiconductors SMD:SOP50P810X120-57N-R361X635, from CERN's library), ready for a KiCad board. 25 are in stock at JLCPCB (part C92113). 11 open-source boards in 9 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | RT_CLK | Input |
| 2 | COMP | Output |
| 3 | VSENSE | Input/output |
| 4 | PWRGD | Output |
| 5 | nOCTW | Output |
| 6 | nFAULT | Output |
| 7 | DTC | Input |
| 8 | nSCS | Input |
| 9 | SDI | Input |
| 10 | SDO | Output |
| 11 | SCLK | Input |
| 12 | DC_CAL | Input |
| 13 | GVDD | Power in |
| 14 | CP1 | Power in |
| 15 | CP2 | Power in |
| 16 | EN_GATE | Input |
| 17 | INH_A | Input |
| 18 | INL_A | Input |
| 19 | INH_B | Input |
| 20 | INL_B | Input |
| 21 | INH_C | Input |
| 22 | INL_C | Input |
| 23 | DVDD | Power in |
| 24 | REF | Input |
| 25 | SO1 | Output |
| 26 | SO2 | Output |
| 27 | AVDD | Power in |
| 28 | AGND | Power in |
| 29 | PVDD1 | Power in |
| 30 | SP2 | Input |
| 31 | SN2 | Input |
| 32 | SP1 | Input |
| 33 | SN1 | Input |
| 34 | SL_C | Input |
| 35 | GL_C | Output |
| 36 | SH_C | Input |
| 37 | GH_C | Output |
| 38 | BST_C | Power in |
| 39 | SL_B | Input |
| 40 | GL_B | Output |
| 41 | SH_B | Input |
| 42 | GH_B | Output |
| 43 | BST_B | Power in |
| 44 | SL_A | Input |
| 45 | GL_A | Output |
| 46 | SH_A | Input |
| 47 | GH_A | Output |
| 48 | BST_A | Power in |
| 49 | VDD_SPI | Input |
| 50 | PH | Output |
| 51 | PH | Output |
| 52 | BST_BK | Power in |
| 53 | PVDD2 | Power in |
| 54 | PVDD2 | Power in |
| 55 | EN_BUCK | Input |
| 56 | SS_TR | Input |
| 57 | GND | Power in |

shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6


duwogus7650-ctrl/board-design
OpenRobot SPN-MC(=VESCular6, VESC6 파생) 동등 기능의 QDD용 원형 모터 컨트롤러를 오픈소스 VESC6를 베이스로 신규 설계하는 프로젝트.

duwogus7650-ctrl/Controller-Board-Design
QDD용 Ø52 원형 VESC6 파생 모터 컨트롤러 설계 (DRV8323RS 60V급)



bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.
Yes. The symbol is Analog & Interface:DRV8301DCA and the footprint ICs And Semiconductors SMD:SOP50P810X120-57N-R361X635, both drawn on this page. PCBKit places them on a board for you when you design with it.
HTSSOP-56-EP-6mm, with 57 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C92113, with 25 in stock; the sellers' links on this page open their listings.
11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.