

Essai opt
- Size
- 41.5 × 44.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 74
- Pads
- 196
- Tracks, vias
- 268, 39
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Aug 2026
- Updated
- 19 Aug 2026
Overview
Essai opt is an open-source printed circuit board by NABL-A, from the NABL-A/Projet-Kicad repository on GitHub. It is a 2-layer board of 41.5 × 44.5 mm with 26 parts on 74 nets, routed with 268 tracks and 39 vias.
It is built around the ESP32-C6-MINI-1U-H4, AP2112K-3.3 and CD74HC4067SM96, with the MAX-M10S among its other parts. Its parts include 9 resistors, 6 capacitors, 4 connectors, 1 IC and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-C6-MINI-1U-H4
SMD,13.2x12.5mm-105.5dBm -40℃~+105℃ 2.4GHz 20.5dBm 382mA 3V~3.6V 73mA ESP32-C6FH4 Integrated Bluetooth function、Integrated Zigbee function、Support USB interface UART、SDIO、SPI、I2C、GPIO、USB SMD,13.2x12.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedCD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersMAX-M10S
LCC-18_10.1X9.7LCC-18_10.1X9.7 New Arrivals ROHSu-bloxUncategorised
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R8, R9 |
| 3 | 33 | Resistor_SMD:R_0603_1608Metric | R5, R6, R7 |
| 2 | 1 | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 4,7u | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 2,7k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | Regulator1 |
| 1 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | MUX1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x20 | Connector_FFC-FPC:JUSHUO_AFA07-S20FCA-00_1x20-1MP_P1.0mm_Horizontal | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | ESP32-C6-MINI-1/U | PCM_Espressif:ESP32-C6-MINI-1 | U2 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LED | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | GPS1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | Recharge1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_124019772112A | J4 |
Similar boards
- 2 layers61 × 61 mm

- 2 layers55 × 35 mm

Pb esp32c6-cape
anujdeshpande/pocketbeagle-esp32c6
PocketBeagle cape with ESP32-C6-MINI-1U (IPEX) — KiCad 10 design, works on PB1 and PB2.
32 parts1CERN-OHL-P-2.0 - 2 layers38.1 × 43.1 mm

In13-nixie device
nonik0/in13-nixie-device
This Nixie project is a continutation of the same spirit of most of my earlier Nixie projects: take an existing Nixie device, house it in a clean, well-built metal case, and maybe do a few addtions or modifications…
33 parts1 - 4 layers50 × 50 mm

- 4 layers25 × 54 mm

- 4 layers49.3 × 45.4 mm

- 2 layers31.6 × 36.8 mm

- 4 layers96.8 × 51 mm

Pocketmuseum edu v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
114 parts1
Questions
How big is the Essai opt PCB?
It measures 41.5 × 44.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Essai opt use?
26 parts, built around the ESP32-C6-MINI-1U-H4, AP2112K-3.3, CD74HC4067SM96 and MAX-M10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Essai opt KiCad files?
From the NABL-A/Projet-Kicad repository on GitHub, at the commit this page was made from: the board is essai_opt/essai_opt.kicad_pcb and its schematic essai_opt/.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Essai opt design in my own project?
Its repository states no licence, so its author keeps all rights: ask NABL-A before reusing the design.