

Slimer
Slime VR MoCap PCB
- Size
- 73.5 × 37.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 67
- Pads
- 208
- Tracks, vias
- 442, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Sep 2024
- Updated
- 21 Sep 2024
Overview
Slimer is an open-source printed circuit board by n3phrite, from the n3phrite/Slimer-MK-I repository on GitHub. It is a 2-layer board of 73.5 × 37.5 mm with 53 parts on 67 nets, routed with 442 tracks and 66 vias.
It is built around the CH340C, ESP-12F and BMI270, with the DW01A, ME6211C50M5G-N and B5819W among its other parts. Its parts include 18 resistors, 10 capacitors, 8 ICs, 6 diodes and 3 switches. It belongs with the ESP8266 boards of this library.
Main components
8CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesBMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementME6211C50M5G-N
SOT-23-5-40℃~+150℃@(Tj) 1 100mV@(100mA)、200mV@(200mA) 30uA 500mA 50uVrms 5V 6V 70dB@(1kHz) Enable、Short Circuit Protection Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)UMH3N
SOT-363-55℃~+150℃ 0.5uA 100 100mA 150mW 2 NPN (Pre-Biased) 250MHz 300mV 50V 5V 6.11kΩ NPN SOT-363 Digital Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Digital Transistors
README
README.mdSlimer MK I
Slime VR MoCap PCB
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C6, C7, C8, C9 |
| 5 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R10, R14, R15 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R11, R21, R23 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C10 |
| 2 | 120k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | GND | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | b5819w | Diode_SMD:D_SOD-123 | D1, D3 |
| 1 | 0.5 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 1.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22 |
| 1 | 12k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | BMI270 | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | Conn_01x04_Socket | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | ESP-12F | RF_Module:ESP-12E | U6 |
| 1 | FLASH | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | ME6211C50M5G-N | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | PMOS | custom:SOT-23 | Q1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | ~ | custom:18605 | U8 |
| 1 | ~ | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm | U4 |
| 1 | ~ | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U7 |
More from n3phrite/Slimer-MK-I
1- 2 layers14 × 18 mm

Similar boards
- 2 layers45 × 59.5 mm

- 2 layers25 × 40 mm

Air quality
lcdporto/air-quality-sensor
A Home Assistant compatible air quality sensor as a demonstration of the process of PCB design
32 parts1 - 2 layers38 × 60 mm

Crossometer mini
fredszaq/crossometer-mini
Design files for crossometer-mini device
63 parts2CERN-OHL-S-2.0 - 2 layers31.9 × 49.9 mm

USBCWrover
sebastius/USBCWrover
Simple ESP32 board with USB C-serial and the Wrover module
23 partsCC0-1.0 - 2 layers44 × 44 mm

Esp32 button
ep-infosec/50_google_makerspace-partsbin
This is a single-button (with some IOs broken out) that can use deep sleep or fully turn off in between uses.
61 partsCC-BY-4.0 - 2 layers33.8 × 46 mm

Watchy
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
63 parts1 - 2 layers70 × 50 mm

Rgbled controller
chof747/rgbled-controller
This is a WiFi enabled RGB LED controller with the following features:
30 partsCC0-1.0 - 2 layers60.9 × 43.5 mm

Wlan thermo front panel
chof747/wlan-thermostat
WLAN Thermostat module to be controlled by Home Assistant via esphome
26 partsCC0-1.0
Questions
How big is the Slimer PCB?
It measures 73.5 × 37.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Slimer use?
53 parts, built around the CH340C, ESP-12F, BMI270 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slimer KiCad files?
From the n3phrite/Slimer-MK-I repository on GitHub, at the commit this page was made from: the board is slimer/slimer.kicad_pcb and its schematic slimer smol/slimer-smol.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slimer design in my own project?
Its repository states no licence, so its author keeps all rights: ask n3phrite before reusing the design.