

Air quality
A Home Assistant compatible air quality sensor as a demonstration of the process of PCB design
- Size
- 25 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 43
- Pads
- 129
- Tracks, vias
- 291, 32
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Jan 2022
- Updated
- 12 Mar 2025
Overview
Air quality is an open-source printed circuit board by lcdporto, from the lcdporto/air-quality-sensor repository on GitHub. It is a 2-layer board of 25 × 40 mm with 32 parts on 43 nets, routed with 291 tracks and 32 vias.
It is built around the CH340C, ESP-12F and ME6211A33M3G-N, with the UMH3N among its other parts. Its parts include 11 resistors, 8 capacitors, 5 ICs, 2 connectors and 1 transistor. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Main components
4CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesME6211A33M3G-N
SOT-23-3-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUMH3N
SOT-363-55℃~+150℃ 0.5uA 100 100mA 150mW 2 NPN (Pre-Biased) 250MHz 300mV 50V 5V 6.11kΩ NPN SOT-363 Digital Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Digital Transistors
README
README.mdair-quality-sensor
A Home Assistant compatible device
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7, R8, R9, R10 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C5, C7 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C2, C6, C8 |
| 3 | 5.1k | Resistor_SMD:R_0805_2012Metric | R2, R3, R11 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP-12F | RF_Module:ESP-12E | U3 |
| 1 | HDC1080 | Package_SON:Texas_PWSON-N6 | U4 |
| 1 | LOGO | LOGO | G*** |
| 1 | ME6211A33M3G-N | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | SGP40 | air-quality:DFN-6-1EP_2.44x2.44mm_P0.8mm_EP1.25x1.64mm | U5 |
| 1 | SSD1306 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
The 31 most common of 32 parts.
Similar boards
- 4 layers28 × 100.5 mm

- 2 layers73.5 × 37.5 mm

- 4 layers38.5 × 47 mm

- 2 layers78.9 × 75.2 mm

- 2 layers69.8 × 79.6 mm

- 4 layers38.5 × 48.5 mm

- 2 layers335.7 × 101 mm

Splitkeybaord
garvita4/split-keyboard
This is a custom spli keybaord with the 1.8inch tft diaply and rotatory encoder and also with nfc based lock system with the controlable backlight .
251 parts - 2 layers51.5 × 20 mm

Questions
How big is the Air quality PCB?
It measures 25 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Air quality use?
32 parts, built around the CH340C, ESP-12F, ME6211A33M3G-N and UMH3N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Air quality KiCad files?
From the lcdporto/air-quality-sensor repository on GitHub, at the commit this page was made from: the board is hardware/air-quality.kicad_pcb and its schematic hardware/air-quality.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Air quality design in my own project?
Its repository states no licence, so its author keeps all rights: ask lcdporto before reusing the design.