4 layers38.5 × 47 mm
4 layers38.5 × 48.5 mm
PY32 Devboard
Asurant/Starboard- Size
- 38.5 × 48.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 37
- Pads
- 116
- Tracks, vias
- 263, 22
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Aug 2026
- Updated
- 10 Sep 2026
Overview
PY32 Devboard is an open-source printed circuit board by Asurant, from the Asurant/Starboard repository on GitHub. It is a 4-layer board of 38.5 × 48.5 mm with 24 parts on 37 nets, routed with 263 tracks and 22 vias.
It is built around the PY32F002BF15P6TR, CH340N and ME6211A33M3G-N. Its parts include 8 capacitors, 5 resistors, 3 ICs and 2 connectors. It belongs with the microcontroller boards boards of this library.
Main components
3
PY32F002BF15P6TR
TSSOP-20Microcontrollers (MCU/MPU/SOC)PUYA
CH340N
SOP-8-20℃~+70℃ 1 2Mbps 3.3V、5V USB 2.0 USB to serial SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ME6211A33M3G-N
SOT-23-3-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdStarboard
The Starboard is a 4 layer USB C devboard that I made using a PY32 chip. It has two 9-pin headers, each offering VBUS, +3.3V, and GND along with 4 IO pins, NRST, and BOOT. Along with this it offers the ability to use a microSD to store code for the devboard. Currently I have not made the physical pcb for this. Currently only the files exist.
| Top View | Bottom View |
|---|---|
Schematic
PCB
BOM
(Please note prices take into factor the minimum buy amounts for each part)
1 PCB
| Part | Quantity | Price | LCSC Number |
|---|---|---|---|
| Capacitors (1uF) | 4 | $0.42 | C116352 |
| Capacitors (100nF) | 4 | $0.13 | C344180 |
| Micro SD Slot | 1 | $0.63 | C393941 |
| 1x09 Pin Header | 2 | $0.46 | C492408 |
| Resistor (5.1k) | 2 | $0.22 | C2930296 |
| Resistor (10k) | 3 | $0.17 | C54921249 |
| Tactile Switch | 4 | $0.53 | C720477 |
| CH340N | 1 | $0.68 | C2977777 |
| ME6211A33M3G-N | 1 | $0.63 | C168807 |
| PY32F002BF15P6TR | 1 | $0.93 | C22438998 |
| USB C | 1 | $1.41 | C2765186 |
| PCB | 5 | $7.00 | |
| Total Without Shipping | $13.21 | ||
| Shipping | $19.20 | ||
| Total With Shipping | $32.40 |
5 PCBs
| Part | Quantity | Price | LCSC Number |
|---|---|---|---|
| Capacitors (1uF) | 20 | $0.42 | C116352 |
| Capacitors (100nF) | 20 | $0.13 | C344180 |
| Micro SD Slot | 5 | $0.63 | C393941 |
| 1x09 Pin Header | 10 | $0.46 | C492408 |
| Resistor (5.1k) | 10 | $0.22 | C2930296 |
| Resistor (10k) | 15 | $0.17 | C54921249 |
| Tactile Switch | 20 | $1.06 | C720477 |
| CH340N | 5 | $3.39 | C2977777 |
| ME6211A33M3G-N | 5 | $0.63 | C168807 |
| PY32F002BF15P6TR | 5 | $0.93 | C22438998 |
| USB C | 5 | $1.41 | C2765186 |
| PCB | 5 | $7.00 | |
| Total Without Shipping | $16.45 | ||
| Shipping | $19.20 | ||
| Total With Shipping | $35.65 |
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C6, C7, C9 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C8 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R7, R8 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J5, J6 |
| 1 | BOOT | easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | BOOT |
| 1 | CH340N | Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ME6211A33M3G-N | easyeda2kicad:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | PB0 | easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | PB4 |
| 1 | PB1 | easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | PB3 |
| 1 | PY32F002BF15P6TR | easyeda2kicad:TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U3 |
| 1 | RESET | easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | NRST |
| 1 | TF PUSH | easyeda2kicad:TF-SMD_TF-PUSH | Card1 |
| 1 | TYPE-C 16PIN 2MD | easyeda2kicad:USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB1 |
Similar boards
- 2 layers78.9 × 75.2 mm
- 2 layers69.8 × 79.6 mm
- 2 layers25 × 40 mm
Air quality
lcdporto/air-quality-sensor
A Home Assistant compatible air quality sensor as a demonstration of the process of PCB design
32 parts1 - 2 layers335.7 × 101 mm
Splitkeybaord
garvita4/split-keyboard
This is a custom spli keybaord with the 1.8inch tft diaply and rotatory encoder and also with nfc based lock system with the controlable backlight .
251 parts - 4 layers28 × 100.5 mm
- 2 layers51.5 × 20 mm
- 2 layers50.5 × 94.7 mm
SwordOfSecretsUSBProd
gili-yankovitch/SwordOfSecrets
To solve the challenge you will need to discover a series of flags, hidden inside the sword. Each one will help you unlock the next step in the challenge, to finally reveal the ultimate secret the sword holds.
16 parts47MIT
Questions
How big is the PY32 Devboard PCB?
It measures 38.5 × 48.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PY32 Devboard use?
24 parts, built around the PY32F002BF15P6TR, CH340N and ME6211A33M3G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PY32 Devboard KiCad files?
From the Asurant/Starboard repository on GitHub, at the commit this page was made from: the board is src/kicad/PY32_Devboard.kicad_pcb and its schematic src/kicad/PY32_Devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PY32 Devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Asurant before reusing the design.