

Espuino pcbs
PCBS for espuino
- Size
- 28 × 100.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 150
- Nets
- 127
- Pads
- 500
- Tracks, vias
- 1,474, 315
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Mar 2024
- Updated
- 23 Mar 2024
Overview
Espuino pcbs is an open-source printed circuit board by orakeldel, from the orakeldel/espuino-pcbs repository on GitHub. It is a 4-layer board of 28 × 100.5 mm with 150 parts on 127 nets, routed with 1,474 tracks and 315 vias.
It is built around the CH340C, ESP32-WROVER-E(4MB) and PAM8302AADCR, with the PAM8908JER, ME4075AM5G and ME6211A33M3G-N among its other parts. Its parts include 43 capacitors, 30 resistors, 16 connectors, 11 ICs and 5 diodes. It belongs with the ESP32 boards of this library.
Main components
12CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-WROVER-E(4MB)
SMD,18x31.4mmSMD,18x31.4mm WiFi Modules ROHSEspressif SystemsWiFi ModulesPAM8302AADCR
SOP-8-40℃~+85℃ 0.3% 1-Channel 2.5Wx1@4Ω 2V~5.5V 4mA 50dB 80dB 85% Class D Filterless architecture SOP-8 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersPAM8908JER
QFN-16-EP(3x3)-40℃~+85℃ 0.03% 100dB 2 Pairs Differential Inputs 2-Channel 2.5V~5.5V 35mWx2@16Ω 4mA 75dB Class AB Enable/shutdown function、Digitally programmable gain QFN-16-EP(3x3) Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersME4075AM5G
SOT-23-5-40℃~+85℃ 1 3.6V 4V~6.5V 55uA 800mA Charging IC Not supported SOT-23-5 Battery Management ROHSMICRONEBattery ManagementME6211A33M3G-N
SOT-23-3-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCA9555PW
TSSOP-24-40℃~+85℃ 1.1uA 16 2.3V~5.5V 3mA 400kHz 8 I2C、SMBus Interrupt Output Reset function、Cascade and address expansion TSSOP-24 I/O Expanders ROHSNXP SemiconductorsI/O ExpandersPJ-327F-5A
SMD3.5mm Headphone Jack 30V 500mA Brass Tin SMD Audio Connectors ROHSHRO ElectronicsAudio Connectors (Headphones)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsS8050-J3Y
SOT-231 NPN 100nA 150MHz 25V 300mA 300mW 350 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSJSMSEMIBipolar (BJT)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdPCBs for espuino.
Note: Work in progress, no working prototyp yet.
Mainboard:
- Board with esp32 wrover, connectors for 6 buttons and led ring, lifepo battery charger, speaker (mono+stereo) and headphones.
Capabutton:
- Capacitive button with led and solder connector
Parts
150| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C11, C14, C15, C21, C22, C23, C24, C26, C28, C31, C32, C33, C37, C38, C41 +4 |
| 10 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3, TP4, TP5, TP6, TP11, TP12, TP13, TP14, TP15, TP16 |
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C10, C13, C17, C18, C25, C27, C34, C40 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C8, C9, C12, C35, C36, C39 |
| 5 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R23, R26, R27, R28 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R29, R30, R31 |
| 4 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C19, C20, C29, C30 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnly | H1, H2, H3, H4 |
| 4 | ~ | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R9, R17, R18 |
| 3 | ~ | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP7 |
| 2 | 1-2: Stereo, 2-3: Mono | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4, JP6 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R24, R25 |
| 2 | 1R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R20 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R12, R14 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | PAM8302AAD | footprint:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U10, U11 |
| 2 | Polyfuse | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 2 | S8050-J3Y | footprint:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | Q3, Q4 |
| 1 | 1.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Boot SW | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Btn1 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J4 |
| 1 | Btn2 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | Btn3 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6 |
| 1 | Btn4 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | Btn5 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8 |
| 1 | Btn6 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J9 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | CHRG_LED | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Close for mono | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | DIN41612_02x10_AB | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J15 |
| 1 | ESP32-WROVER-E | PCM_Espressif:ESP32-WROVER-E | U5 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | HP.DET | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | HP.EN | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP7 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | I2S | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J13 |
| 1 | IO5_LED | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP10 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | ME4075AM5G | footprint:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BL | U1 |
| 1 | ME6211A33M3G-N | footprint:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | Micro_SD_Card_Det1 | footprint:TF-SMD_TF-115 | J16 |
| 1 | Neopixel | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J10 |
| 1 | PAM8908JER | footprint:QFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U8 |
| 1 | PCA.INT | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP8 |
| 1 | PCA9555PW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U9 |
| 1 | PCM5102APWR | footprint:TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U7 |
| 1 | PE.EN | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP18 |
| 1 | PJ-327F-5A | footprint:AUDIO-SMD_PJ-327F-5A | U6 |
| 1 | POWER_LED | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | RFID | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J14 |
| 1 | RXD | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | Reset SW | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SD.DET | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | SS14 | Diode_SMD:D_SMA | D2 |
| 1 | SW_POWER_LED | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP9 |
| 1 | Speaker Left/Mono | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Speaker Right | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | TXD | TestPoint:TestPoint_Pad_D1.5mm | TP17 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | TP19 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J12 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.5mm | TP9 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D3 |
More from orakeldel/espuino-pcbs
1- 2 layers24 × 16 mm

Similar boards
- 2 layers98.1 × 99.7 mm

- 4 layers100 × 100 mm

Pico Dev iCE
frohro/pico-dev-ice
This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.
294 parts3 - 2 layers37.6 × 16.1 mm

USB UART BRIDGE
Jana-Marie/USB-UART-BRIDGE
USB-UART-BRIDGE & ESP programmer featuring tag-connect
22 parts5 - 2 layers25 × 40 mm

Air quality
lcdporto/air-quality-sensor
A Home Assistant compatible air quality sensor as a demonstration of the process of PCB design
32 parts1 - 4 layers80 × 54 mm

Poket
kaorii-ako/Poket
ESP32-S3 Bluetooth MP3 player - custom PCB + 3D-printed case, built from scratch
104 parts - 2 layers100 × 85 mm

ESP32 MediaCarrier routed
xmyoot/esp32-media-carrier
ESP32 multimedia carrier board with 7–24 V DC buck regulator, 3.2 W Class-D I2S audio amp, WS2812 LED ring driver, and SPI TFT display header
97 partsMIT - 4 layers38.5 × 47 mm

- 4 layers99.5 × 65 mm

Questions
How big is the Espuino pcbs PCB?
It measures 28 × 100.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Espuino pcbs use?
150 parts, built around the CH340C, ESP32-WROVER-E(4MB), PAM8302AADCR and PAM8908JER. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Espuino pcbs KiCad files?
From the orakeldel/espuino-pcbs repository on GitHub, at the commit this page was made from: the board is mainboard/mainboard.kicad_pcb and its schematic capabutton/capabutton2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Espuino pcbs design in my own project?
Its repository states no licence, so its author keeps all rights: ask orakeldel before reusing the design.