Skip to the content
4 layers47.5 × 41 mmDecodingBoard, the printed circuit board in 3D

DecodingBoard

N-Pulse/BMI-EMG-HW

Find the schematics and PCB layout for the hardware of the EMG Bracelet

Size
47.5 × 41 mm
Copper layers
4
Thickness
1.6 mm
Parts
71
Nets
82
Pads
278
Tracks, vias
551, 122
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Nov 2025
Updated
6 Nov 2026

Overview

DecodingBoard is an open-source printed circuit board by N-Pulse, from the N-Pulse/BMI-EMG-HW repository on GitHub. It is a 4-layer board of 47.5 × 41 mm with 71 parts on 82 nets, routed with 551 tracks and 122 vias.

It is built around the STM32WBA65CIU6, ESDS302DBVR-TP and TPS2121RUXR, with the TPS7A7200RGWT, USBLC6-2SC6 and TL3305BF100QG among its other parts. Its parts include 30 capacitors, 19 resistors, 7 ICs, 5 connectors and 3 diodes. It belongs with the STM32 boards of this library.

Main components

7

Parts

71
QtyValueFootprintReferences
15100nFCapacitor_SMD:C_0402_1005MetricC5, C6, C8, C9, C10, C11, C12, C14, C21, C22, C23, C24, C26, C28, C31
6100Resistor_SMD:R_0402_1005MetricR1, R2, R13, R14, R15, R17
610uFCapacitor_SMD:C_0603_1608MetricC4, C13, C16, C17, C27, C29
3IN_S42BT LEDLED_SMD:LED_0402_1005MetricD1, D2, D6
210pFCapacitor_SMD:C_0603_1608MetricC19, C20
223.7kResistor_SMD:R_0402_1005MetricR8, R11
24.7kResistor_SMD:R_0603_1608MetricR3, R4
24.7uFCapacitor_SMD:C_0603_1608MetricC3, C25
25.1kResistor_SMD:R_0402_1005MetricR5, R6
25kResistor_SMD:R_0402_1005MetricR9, R12
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2
2TL3305BF100QGFootprints:TL3305BF160QGSW1, SW2
10.01uFCapacitor_SMD:C_0402_1005MetricC18
110 μF 6.3V X5RCapacitor_SMD:C_0805_2012MetricC1
110kResistor_SMD:R_0402_1005MetricR16
11uFCapacitor_SMD:C_0402_1005MetricC15
12.2uHInductor_SMD:L_0805_2012MetricL2
12053380002Footprints:CONN_2053380000-SD_02_MOLJ4
1220pFCapacitor_SMD:C_0402_1005MetricC2
1330Resistor_SMD:R_0402_1005MetricR19
14.7kResistor_SMD:R_0402_1005MetricR18
1470nFCapacitor_SMD:C_0402_1005MetricC7
15037630391Footprints:5037630391J6
15037630491Footprints:CONN_5037630000-SD_04_MOLJ5
151.1kResistor_SMD:R_0402_1005MetricR10
186.8kResistor_SMD:R_0603_1608MetricR7
1CX2016DB32000D0FLJCCFootprints:CX2016DB32000D0FLJCCXTAL1
1ESDS302DBVRFootprints:SOT95P280X145-5NU1
1MCP111-195I_TOFootprints:LR645N3GP013IC3
1RN4871-V_RM140Footprints:RN4871VRM140IC2
1STM32WBA65CIU6Footprints:QFN50P700X700X60-49N-DIC1
1TPS2121RUXRFootprints:TPS2121RUXRU4
1TPS7A7200RGWTFootprints:QFN65P500X500X100-21N-DU2
1TSM-106-02-T-SH-LCFootprints:SAMTEC_TSM-106-02-T-SH-LCJ3
1TestPointTestPoint:TestPoint_Pad_D1.0mmTP1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4110J1

More from N-Pulse/BMI-EMG-HW

4
  • 4 layers60 × 34.1 mmPower v3.3, the printed circuit board in 3D

    Power v3.3

    N-Pulse/BMI-EMG-HW

    Find the schematics and PCB layout for the hardware of the EMG Bracelet

    63 parts
  • 2 layers33.1 × 54 mmProcessing board, the printed circuit board in 3D

    Processing board

    N-Pulse/BMI-EMG-HW

    Find the schematics and PCB layout for the hardware of the EMG Bracelet

    59 parts
  • 4 layers48.3 × 13.2 mmBioAmp EXG Pill, the printed circuit board in 3D

    BioAmp EXG Pill

    N-Pulse/BMI-EMG-HW

    Find the schematics and PCB layout for the hardware of the EMG Bracelet

    41 parts
  • 2 layers39.2 × 11 mmBioAmp EXG Pill, the printed circuit board in 3D

    BioAmp EXG Pill

    N-Pulse/BMI-EMG-HW

    Find the schematics and PCB layout for the hardware of the EMG Bracelet

    21 parts

Similar boards

  • 4 layers95.3 × 62 mmProcessing board, the printed circuit board in 3D

    Processing board

    N-Pulse/EMG-HW-MainBoard

    This repository contains the PCB design of the EMG bracelet's main board used for EMG signal processing and decoding. Detailed description of the project can be found in the Documentation folder

    135 partsCC-BY-4.0
  • 2 layers79 × 66.8 mmDeneme, the printed circuit board in 3D

    Deneme

    bugraalpaydin/aks-pcb

    70 parts
  • 8 layers42.2 × 67.2 mmOBC PCB, the printed circuit board in 3D

    OBC PCB

    timohueser/OpenBikeComputer

    Open source Bikecomputer with a focus on exploration and adventure.

    186 parts11GPL-3.0
  • 2 layers48 × 32 mmFanboard, the printed circuit board in 3D

    Fanboard

    jbuonagurio/fanboard-pcb

    Fan Control Board Hardware Design

    36 parts2
  • 4 layers50 × 75 mmOneroiV1, the printed circuit board in 3D

    OneroiV1

    HomeOnDuna/Nyx-Flight-Computers

    Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.

    166 parts1
  • 6 layers75 × 21.4 mmSmartcube revA, the printed circuit board in 3D

    Smartcube revA

    manhoosbilli1/smart-cube-multi-pcb-flex-assembly

    Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)

    39 parts1
  • 4 layers198.4 × 104.3 mmDC33, the printed circuit board in 3D

    DC33

    Maritime-Hacking-Village/Badge-2025

    Public repository for the official MHV 2025 badge.

    200 parts15CERN-OHL-W-2.0
  • 4 layers100 × 100 mmFCCU v21-schematic pcb, the printed circuit board in 3D

    FCCU v21-schematic pcb

    HydrogreenPollub/fuel_cell_control_unit_pcb_fccu_v2_1

    Last FCCU version made by Michał Borkowski. All connections are similiar with FCCUv2. Add 2x n-mosfet with Wago conectors on the back side and 2x ADC on the same i2c line

    280 parts

Questions

How big is the DecodingBoard PCB?

It measures 47.5 × 41 mm and has 4 copper layers, 1.6 mm thick.

What parts does the DecodingBoard use?

71 parts, built around the STM32WBA65CIU6, ESDS302DBVR-TP, TPS2121RUXR and TPS7A7200RGWT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DecodingBoard KiCad files?

From the N-Pulse/BMI-EMG-HW repository on GitHub, at the commit this page was made from: the board is DecodingBoard/Board V4/DecodingBoard/DecodingBoard.kicad_pcb and its schematic BioAmps/BioAmp_V1/BioAmp-EXG-Pill.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DecodingBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask N-Pulse before reusing the design.