
Processing board
N-Pulse/BMI-EMG-HW
Find the schematics and PCB layout for the hardware of the EMG Bracelet

This repository contains the PCB design of the EMG bracelet's main board used for EMG signal processing and decoding. Detailed description of the project can be found in the Documentation folder
Processing board is an open-source printed circuit board by N-Pulse, from the N-Pulse/EMG-HW-MainBoard repository on GitHub, published under the CC-BY-4.0 licence. It is a 4-layer board of 95.3 × 62 mm with 135 parts on 125 nets, routed with 813 tracks and 292 vias.
It is built around the STM32WBA63CIU6, DLF162500LT-5028A1 and ADS7953SBDBTR, with the BGS13SN8E6327XTSA1, REF5025AQDRQ1 and PMEG4030AEXE-QX among its other parts. Its parts include 56 capacitors, 22 resistors, 11 connectors, 9 ICs and 6 diodes. It belongs with the STM32 boards of this library.
This repository contains the PCB design of the EMG bracelet's main board used for EMG signal processing and decoding. Detailed description of the project can be found in the Documentation folder
This work is licensed under a Creative Commons Attribution 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 150pF | Capacitor_SMD:C_0402_1005Metric | C5, C7, C10, C11, C13, C14, C15, C17, C18, C20, C22, C23, C24, C25, C26, C27 +1 |
| 14 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C28, C30, C32, C40, C41, C42, C43, C45, C46, C47, C51, C57 |
| 10 | 100R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R7, R8, R10, R11, R14, R20 |
| 10 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R6, R9, R12, R13, R17, R18, R19, R21, R22 |
| 6 | 10uF | Capacitor_SMD:C_0402_1005Metric | C16, C29, C31, C33, C50, C52 |
| 6 | PN5260 | PN5260:PN5260 | TP1, TP3, TP5, TP6, TP12, TP13 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C9, C12, C19, C44 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP4, TP7, TP8, TP11 |
| 4 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4, J5, J8, J9 |
| 4 | IN_S42BT LED | LED_SMD:LED_0402_1005Metric | D1, D4, D5, D6 |
| 2 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C38, C39 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 27pF | Capacitor_SMD:C_0805_2012Metric | C53, C54 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | DMN66D0LT-7 | DMN66D0LT-7:SOT50P160X90-3N | Q2, Q3 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 2 | PMEG4030AEXE-QX | PMEG4030AEXE-QX:PMEG4030AEXEQX | D2, D3 |
| 2 | TL3305BF100QG | TL3305BF100QG:TL3305BF160QG | SW1, SW2 |
| 2 | Unknown | Capacitor_SMD:C_0402_1005Metric | C36, C37 |
| 1 | 0.3pF | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 0.8pF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 1 uF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric | C55 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C49 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C48 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | 5V- | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | ADS7953SBDBT | ADS7953SBDBT:DBT38 | U4 |
| 1 | AMCA31-2R450G-S1F-T3 | AMCA31-2R450G-S1F-T3:ANTC3216X140N | AE2 |
| 1 | BGS13SN8E6327XTSA1 | BGS13SN8E6327XTSA1:BGS13SN8E6327XTSA1 | U8 |
| 1 | CONMHF1-SMD-G-T | CONMHF1-SMD-G-T:CONMHF1SMDGT | J10 |
| 1 | CX2016DB32000D0FLJCC | CX2016DB32000D0FLJCC:xtal4_CX2016DB_AVX | XTAL1 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | DLF162500LT-5028A1 | DLF162500LT-5028A1:DLF162500LT5028A1 | FL1 |
| 1 | DMP3056LSS-13 | DMP3056LSS-13:SOIC127P600X170-8N | Q1 |
| 1 | ECS-120-18-5PX-CKM-TR | ECS-120-18-5PX-CKM-TR:ECS120185PXCKMTR | XTAL2 |
| 1 | LD1117DT18TR | LD1117DT18TR:TO228P972X240-3N | U7 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | LD1117S50TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | LOGO | logo:logo35_black | G*** |
| 1 | MCP2200-I_SO | MCP2200-I_SO:SOIC127P1030X265-20N | U9 |
| 1 | OPA192IDR | OPA192IDR:SOIC127P600X175-8N | U2 |
| 1 | PCB_antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | REF5025AQDRQ1 | REF5025AQDRQ1:SOIC127P600X175-8N | U3 |
| 1 | STM32WBA63CIU6 | SMT32WBA63:UFQFPN-48_STM | U1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | USB4215-03-A_REVA | USB4215_03_A:GCT_USB4215-03-A_REVA | J11 |

N-Pulse/BMI-EMG-HW
Find the schematics and PCB layout for the hardware of the EMG Bracelet



bdini13/esp32-cc1101-multiband
Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.


davispe1/wearable-imu
Node PCB — revision 1.0. 4-layer board (F.Cu, In1.Cu, In2.Cu, B.Cu).

TENNLab-UTK/NWRIST
Code and KiCAD PCB design for the NWRIST: Neuromorphic Wearable for Real-Time Intelligent Sensing Technology paper

It measures 95.3 × 62 mm and has 4 copper layers, 1.16 mm thick.
135 parts, built around the STM32WBA63CIU6, DLF162500LT-5028A1, ADS7953SBDBTR and BGS13SN8E6327XTSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the N-Pulse/EMG-HW-MainBoard repository on GitHub, at the commit this page was made from: the board is Processing_board/Processing_board.kicad_pcb and its schematic Processing_board/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).