Skip to the content
1122

TL3305BF100QG

E-SwitchExtended

- Lack of specifications ROHS

Part id
e-switch/TL3305BF100QG
Category
Uncategorised
Pins
4
In stock
0 at JLCPCB (C42367714)
Used on
11 open-source boards

Overview

The TL3305BF100QG is an uncategorised made by E-Switch with 4 pins. - Lack of specifications ROHS.

PCBKit's library has its footprint (Button_Switch_SMD:SW_SPST_TL3305B, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C42367714). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

1122
Button_Switch_SMD:SW_SPST_TL3305BFrom KiCad's library

Open-source boards using it

11See all 11
  • 4 layers198.4 × 104.3 mmDC33, the printed circuit board in 3D

    DC33

    Maritime-Hacking-Village/Badge-2025

    Public repository for the official MHV 2025 badge.

    200 parts15CERN-OHL-W-2.0
  • 4 layers100 × 100 mmFCCU v21-schematic pcb, the printed circuit board in 3D

    FCCU v21-schematic pcb

    HydrogreenPollub/fuel_cell_control_unit_pcb_fccu_v2_1

    Last FCCU version made by Michał Borkowski. All connections are similiar with FCCUv2. Add 2x n-mosfet with Wago conectors on the back side and 2x ADC on the same i2c line

    280 parts
  • 2 layers100 × 100 mmSchematic main2, the printed circuit board in 3D

    Schematic main2

    HydrogreenPollub/pcb-fuel-cell-control

    New fuel cell control pcb

    227 partsMIT
  • 2 layers47.5 × 50 mmHAMS node, the printed circuit board in 3D

    HAMS node

    JakubFranek/Home-Air-Monitoring-System

    Home Air Monitoring System (HAMS) is my personal hardware & embedded software development project designed to monitor indoor and outdoor air quality in my home.

    45 parts
  • 2 layers164 × 126.5 mmDAB converter, the printed circuit board in 3D

    DAB converter

    lbregy/Power-Electronics

    202 parts
  • 2 layers88.9 × 72.6 mm3band testboard mcu based, the printed circuit board in 3D

    3band testboard mcu based

    Maltheren/Connectivity_3band_LoRaboard

    The first revision lora testboards for the tunnel measurement project

    84 parts
  • 4 layers47.5 × 41 mmDecodingBoard, the printed circuit board in 3D

    DecodingBoard

    N-Pulse/BMI-EMG-HW

    Find the schematics and PCB layout for the hardware of the EMG Bracelet

    71 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TL3305BF100QG?

Yes. the footprint Button_Switch_SMD:SW_SPST_TL3305B, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the TL3305BF100QG datasheet?

E-Switch publishes it: the Datasheet link on this page opens it.

Where can I order the TL3305BF100QG?

JLCPCB lists it as part C42367714, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TL3305BF100QG?

Parts like it in the library: the TL3305CF100QG by E-Switch. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TL3305BF100QG?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.