
IMU module
MohamadAminGhanoum/IMU-board
planning to make a module that has small sensors on the pcbs, which will give me motion data, which i will track and recieve on either my phone or computer using the usb-c

Uwaterloo Baja SAE Central Data Acquisition Pcb
Baja daq is an open-source printed circuit board by myamhili, from the myamhili/Baja_daq repository on GitHub. It is a 4-layer board of 65 × 65 mm with 57 parts on 36 nets, routed with 375 tracks and 145 vias.
It is built around the TJA1051T, AMS1117-3.3 and L7805, with the ISM330DHCX and SMAJ15A among its other parts. Its parts include 20 capacitors, 17 resistors, 4 ICs, 2 connectors and 1 diode. It belongs with the STM32 boards of this library.
A custom, ruggedized telemetry and data logging PCB engineered for the University of Waterloo Baja SAE racing vehicle.
Unlike standard microcontroller breakout boards, this DAQ node is designed to survive the harsh electrical and mechanical environment of an automotive chassis. It features a 4-layer load-dump protected layout, dedicated hardware for high-speed logging, and a real-time FreeRTOS firmware architecture.
The board interfaces directly with the vehicle's 12V starter battery and is hardened against off-road electrical surges:
The system runs a custom C firmware utilizing the STM32 HAL and CMSIS-RTOS.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C13, C14, C15, C19 |
| 5 | 47k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6 |
| 5 | Conn_01x03 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | CAN, J3, J4, SUSP_FR, SUSP_RR |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, RPM, RPM |
| 2 | 1.7k | Resistor_SMD:R_0805_2012Metric | R12, R15 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C16, C18 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R14, R17 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 3.3k | Resistor_SMD:R_0805_2012Metric | R13, R16 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C17 |
| 1 | 120Ω | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Conn_01x02 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J7 |
| 1 | Conn_01x04 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | TEMP |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DEB |
| 1 | ISM330DHCX | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | IMU |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | SMAJ15A | Diode_SMD:D_SMA | D1 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

MohamadAminGhanoum/IMU-board
planning to make a module that has small sensors on the pcbs, which will give me motion data, which i will track and recieve on either my phone or computer using the usb-c

comedy1982-spec/pcb-viewer
Dadu 기반 ELD 솔레노이드 ECU. 12 V 입력, TC364 · CAN-FD · PMIC, PCB 위 센서는 NTC 하나. A4911(3상 드라이버)의 A·B 레그로 H-브리지(하프브리지 IAUC60N04S6N050H ×2, 레그 션트 2 mΩ ×2), C 레그는 비워 두고 SPI로 그 고장(VC · CHO · CLO · OC3)을 마스크.

EdgeOfAssembly/multi-hdd-usb3-adapter
USB3 multi-HDD adapter (PATA+SATA) — JLCPCB Gerbers/BOM

hasan-abuzaid/nft-hydroponic-controller
Open-hardware ESP32-S3 controller for NFT hydroponics: pH/EC/level sensing, 6 relay channels, ESPHome + Home Assistant

zmuhammad07/TakeUp
TakeUp is a voice controlled quadrocopter designed to recieve commends through seemless audio transmission.

MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it


FireLabsCA/HabitatCAN-Dev-Board-ESP32
HabitatCAN development board with ESP32 microprocessor
It measures 65 × 65 mm and has 4 copper layers, 1.6 mm thick.
57 parts, built around the TJA1051T, AMS1117-3.3, L7805 and ISM330DHCX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the myamhili/Baja_daq repository on GitHub, at the commit this page was made from: the board is pcb/baja_daq.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask myamhili before reusing the design.