
Nest mini v2-drop in pcb
iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.
MDDExtended
-65℃~+150℃ 15V 16.4A@10/1000us 18.5V 1uA 24.4V 400W@10/1000us TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS
The SMAJ15A is an ESD And Surge Protection made by MDD in a DO-214AC(SMA) package with 2 pins. -65℃~+150℃ 15V 16.4A@10/1000us 18.5V 1uA 24.4V 400W@10/1000us TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS.
PCBKit's library has its KiCad symbol (Diode:SMAJ15A, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 6,502 are in stock at JLCPCB (part C113958). 61 open-source boards in 49 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Passive |
| 2 | A2 | Passive |

iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

fahreddinaykut/SparkAltBatteryBoard
A custom research-oriented battery interface and telemetry board for the DJI Spark platform, built around a standard 3S LiPo battery pack instead of the discontinued, hard-to-find OEM Smart Battery.

thomasnonis/ppse-2021
This is the repository for SALMO, the Solar Azimuth and eLevation Motorized lOcator. It is a PCB used for driving a tracking solar panel system, using GPS location and a MPPT algorithm to maximise the incident power.

CoraBeanz/linescan-hyperspectral-splatting
A homebuilt pushbroom spectrograph rides a robot arm, and the 3D Gaussian splat it trains stores a full 500–950 nm spectrum in every Gaussian instead of an RGB color.

jasperhax0r/CompaqPortableKeyboard
Mechanical Keyboard for the original Compaq Portable XT-Class

nicholasshort/GuitarFX
This is a digital guitar effects pedal designed as a generic DSP platform. I've written simple algorithms such as volume and tone control, however plans are in the works for others: namely hard and soft clipping…

Poent/RC-Snowblower
Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
Yes. The symbol is Diode:SMAJ15A and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.
DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.
MDD publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C113958, with 6,502 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SMAJ15A by GOODWORK, the SMAJ15CA by hongjiacheng, the SMAJ15CA by GOODWORK and the SMAJ15CA by MDD. Check their datasheets: a part that fits the footprint may still differ in its ratings.
61 boards in 49 repositories on GitHub; the most starred are listed on this page, with their KiCad files.