Skip to the content
2 layers52 × 94.2 mmTangara faceplate, the printed circuit board in 3D

Tangara faceplate

mudkip350/tangara_fork
Size
52 × 94.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
35
Pads
149
Tracks, vias
218, 95
Pours
12
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Jan 2026
Updated
23 Jan 2026

Overview

Tangara faceplate is an open-source printed circuit board by mudkip350, from the mudkip350/tangara_fork repository on GitHub. It is a 2-layer board of 52 × 94.2 mm with 46 parts on 35 nets, routed with 218 tracks and 95 vias.

It is built around the AT42QT2120-MMH, DRV2605LDGS and AC0603JR-0710KL, with the AC0603FR-131ML, GT-F0509SR15-15SMT01 and PJC138K_R1_00001 among its other parts. Its parts include 9 resistors, 5 capacitors, 3 connectors, 3 switches and 2 ICs. It belongs with the RP2040 boards of this library.

Main components

6

Parts

46
QtyValueFootprintReferences
810kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R9
4MountingHoleMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
31uFCapacitor_SMD:C_0805_2012MetricC3, C4, C5
1+TestPoint:TestPoint_Pad_D1.5mmJ1
1-TestPoint:TestPoint_Pad_D1.5mmJ2
10.1uFCapacitor_SMD:C_0603_1608MetricC1
11MResistor_SMD:R_0603_1608MetricR8
122uFCapacitor_SMD:C_1206_3216MetricC2
13V3TestPoint:TestPoint_Pad_D1.0mmTP8
1AT42QT2120Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mmU1
1BUTTONfaceplate-footprints:qtouch-buttonSW1
1CSTestPoint:TestPoint_Pad_D1.0mmTP5
1DRV2605LDGSPackage_SO:VSSOP-10_3x3mm_P0.5mmU2
1G***kibuzzard-63E31E51kibuzzard-63E31E51
1G***kibuzzard-63E31E57kibuzzard-63E31E57
1GNDTestPoint:TestPoint_Pad_D1.0mmTP9
1GUARDfaceplate-footprints:qtouch-guardSW3
1JD-T1800faceplate-footprints:JD-T1800LCD1
1LEDTestPoint:TestPoint_Pad_D1.0mmTP7
1LOGOLOGOG***
1LOGOfootprints:oshwa-certG***
1MB Connectorfaceplate-footprints:G-Switch GT-F0509SR15-15SMT01J4
1PICOTestPoint:TestPoint_Pad_D1.0mmTP3
1PJC138KPackage_TO_SOT_SMD:SOT-323_SC-70Q1
1RSTestPoint:TestPoint_Pad_D1.0mmTP6
1SCLTestPoint:TestPoint_Pad_D1.0mmTP1
1SCLKTestPoint:TestPoint_Pad_D1.0mmTP4
1SDATestPoint:TestPoint_Pad_D1.0mmTP2
1WHEELfaceplate-footprints:qtouch-wheelSW2

The 41 most common of 46 parts.

Similar boards

  • 4 layers52 × 94.2 mmTangara mainboard, the printed circuit board in 3D

    Tangara mainboard

    dpaola2/Harmony

    Current logistics, September 26: core modules are received, and the revision B shells, LCD supports and carrier gauge passed loose fit checks. Screws and foam are ordered. The SD trial playlist is prepared.

    124 parts
  • 2 layers27.5 × 41.5 mmXmas orn, the printed circuit board in 3D

    Xmas orn

    MRobertEvers/esp32-xmas

    ESP32 xmas display

    20 parts
  • 2 layers287.8 × 126.7 mmNoName, the printed circuit board in 3D

    NoName

    AlaaSaadAbdo/battoota

    Keyboards

    267 parts188
  • 6 layers50.2 × 77.2 mmMeko, the printed circuit board in 3D

    Meko

    KOEGlike/meko

    A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad

    274 parts90GPL-3.0
  • 2 layers71.1 × 24.1 mmDactyl manuform gimbal, the printed circuit board in 3D

    Dactyl manuform gimbal

    sffubs/dactyl_manuform_gimbal

    Instrutions and designs for building the dactyl-manuform-gimbal keyboard

    20 parts57
  • 4 layers82.8 × 33 mmE ink watch, the printed circuit board in 3D

    E ink watch

    sandgum/Triangulate-ES_01-Watch

    A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

    162 parts22
  • 2 layers55.6 × 71.2 mmBYTE PANELkicad pcb, the printed circuit board in 3D

    BYTE PANELkicad pcb

    oneohm/BYTE

    The BYTE hands free interface

    78 parts11GPL-3.0
  • 4 layers72 × 75 mmNrf52480 Dev board, the printed circuit board in 3D

    Nrf52480 Dev board

    brendena/Nordic_Pebble_Steel

    The goal of this project is to replace the main motherboard in the pebble steel with newer parts. Specifically the cpu will be a Nordic NRF52840.

    75 parts9

Questions

How big is the Tangara faceplate PCB?

It measures 52 × 94.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tangara faceplate use?

46 parts, built around the AT42QT2120-MMH, DRV2605LDGS, AC0603JR-0710KL and AC0603FR-131ML. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tangara faceplate KiCad files?

From the mudkip350/tangara_fork repository on GitHub, at the commit this page was made from: the board is tangara-hw/tangara-faceplate/tangara-faceplate.kicad_pcb and its schematic tangara-hw/tangara-faceplate/tangara-faceplate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tangara faceplate design in my own project?

Its repository states no licence, so its author keeps all rights: ask mudkip350 before reusing the design.