

Aerocore
Flight controller for 3-inch FPV drones, built around an STM32F411 and BMI270 IMU. Custom 4-layer PCB with power regulation, IMU, USB-C, and 4-motor ESC control.
- Size
- 36 × 36 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 59
- Pads
- 213
- Tracks, vias
- 345, 100
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Sep 2026
- Updated
- 27 Oct 2026
Overview
Aerocore is an open-source printed circuit board by msamikassem, from the msamikassem/Aerocore repository on GitHub. It is a 4-layer board of 36 × 36 mm with 58 parts on 59 nets, routed with 345 tracks and 100 vias.
It is built around the STM32F411CEU6, BMI270 and TLV75533PDBV, with the TYPE-C-31-M-12 among its other parts. Its parts include 18 capacitors, 13 connectors, 9 resistors, 4 ICs and 4 diodes. It belongs with the robots and motor control and sensors and measurement boards and the STM32 boards of this library.
Main components
4STM32F411CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 100MHz 128KB 12bit 32 Bit 36 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)BMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersTLV75533PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Thermal Shutdown、Input undervoltage protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdAerocore — 3" Flight Controller
Aerocore is a flight controller for 3-inch FPV drones, built around an STM32F411 microcontroller and a BMI270 IMU. It handles IMU sensing, ESC motor control, USB configuration, and power regulation from a 4S LiPo on a single 4-layer board.
## What it does
- Runs an STM32F411CEU6 (Cortex-M4, 100MHz) as the main flight computer
- BMI270 6-axis IMU over SPI for gyro/accel
- USB-C mainly for serial communication with a PC
- Powers itself from a 4S LiPo, steps down to 5V (buck) and 3.3V (LDO) on board
- Drives 4 ESCs via PWM
- UART header for an ELRS receiver
- Dedicated ST-Link header for programming/debugging
- 2 status LEDs + 2 power LEDS (5v and 3v)
Key specs
| MCU | STM32F411CEU6, 100MHz Cortex-M4, QFN48 |
| IMU | Bosch BMI270, SPI |
| Input power | 4S LiPo (up to 60A absolute max draw, 15A per motor) |
| Onboard rails | 5V (LMR51430 buck), 3.3V (TLV75533 LDO) |
| USB | USB-C, USB2.0 full-speed |
| Board | 4 layers, 36×36mm, 1.6mm thick |
| Stackup | JLC04161H-7628 (1oz outer / 0.5oz inner copper) |
| Mounting holes | 4× M2.5, 26.5×26.5mm spacing |
Repo layout
hardware/ -> PCB files
kicad/ -> the actual schematic + PCB source files (final version)
Component/
Data_sheets/ -> Data sheets of chosen components
My_FootPrints.pretty/ -> FootPrints not avaliable on KiCAD
Schematics/ -> Schematics not avaliable on KiCAD
3D part/ -> Components' 3D model
archive/ -> PCB V1
manufacturing/ -> files needed by PCB manufacturer
bom/ -> bill of material
cpl/ -> component placement
DRC/ -> KiCAD Error and warning reports
firmware/ -> flight firmware
docs/
design-log -> PCB design decisions and difficulties
specs -> PCB specifications Status
- Schematic design
- PCB layout
- Ordered from JLCPCB
- Board assembled and bring-up tested
- Firmware
- First flight
Tools used
- KiCad 7 for schematic + PCB
License
MIT — see LICENSE. Feel free to use any of this for your own projects; if you spot a mistake I haven't caught yet, I'd genuinely like to know.
Author
Mohammed Kassem — built as a personal project. [msamikassem@gmail.com/ linkedin.com/in/msamikassem]
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C7, C8, C11, C13, C14, C16, C17 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R5, R6, R8, R9 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 4 | ~ | MountingHole:MountingHole_2.7mm | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C18 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C10, C12 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C9, C15 |
| 2 | 5K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 13.7k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 16MHZ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 5V_OUT | Custom:Power_Pad_1.5x1.5mm | J1 |
| 1 | 6.8u | Inductor_SMD:L_Sunlord_MWSA0603S | L1 |
| 1 | BAT_IN | Custom:Power_Pad_4x5mm | J2 |
| 1 | BMI270 | Custom:XDCR_BMI270 | U3 |
| 1 | ELSR | Custom:Power_Pad_4_1.5x1.5mm | J12 |
| 1 | ESC1_PWM | Custom:Power_Pad_1.5x1.5mm | J5 |
| 1 | ESC1_PWR | Custom:Power_Pad_2.5x3.5mm | J4 |
| 1 | ESC2_PWM | Custom:Power_Pad_1.5x1.5mm | J7 |
| 1 | ESC2_PWR | Custom:Power_Pad_2.5x3.5mm | J6 |
| 1 | ESC3_PWM | Custom:Power_Pad_1.5x1.5mm | J9 |
| 1 | ESC3_PWR | Custom:Power_Pad_2.5x3.5mm | J8 |
| 1 | ESC4_PWM | Custom:Power_Pad_1.5x1.5mm | J11 |
| 1 | ESC4_PWR | Custom:Power_Pad_2.5x3.5mm | J10 |
| 1 | LMR51430 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | ST-LINK header | Custom:Solder_Pad_5_1.5x1.5mm | J13 |
| 1 | STM32F411CEU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U4 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TYPE-C-31-M-12 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
Similar boards
- 4 layers65.1 × 30.2 mm

- 4 layers180.4 × 157.2 mm

- 2 layers303.6 × 96.1 mm

- 4 layers39 × 69 mm

- 2 layers

LED Coaster
Olivermoberg98/LED-Coaster
Battery-powered RGB LED drink coaster: ESP32-C3 firmware, Android BLE app, KiCad PCB and 3D-printed enclosure
84 partsMIT - 4 layers75.2 × 99.5 mm

FOC
nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…
261 parts81 - 4 layers46.3 × 38.6 mm

- 4 layers48 × 87 mm

Questions
How big is the Aerocore PCB?
It measures 36 × 36 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Aerocore use?
58 parts, built around the STM32F411CEU6, BMI270, TLV75533PDBV and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aerocore KiCad files?
From the msamikassem/Aerocore repository on GitHub, at the commit this page was made from: the board is hardware/kicad/Aerocore.kicad_pcb and its schematic hardware/kicad/Aerocore.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aerocore design in my own project?
Its repository states no licence, so its author keeps all rights: ask msamikassem before reusing the design.