

ToneControls
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 216
- Nets
- 233
- Pads
- 702
- Tracks, vias
- 887, 48
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2018
- Updated
- 6 Mar 2021
Overview
ToneControls is an open-source printed circuit board by mrwillem, from the mrwillem/PCBs repository on GitHub. It is a 2-layer board with 216 parts on 233 nets, routed with 887 tracks and 48 vias.
It is built around the LM358, TLP222AF and LTV-847S-BC. Its parts include 80 resistors, 42 capacitors, 36 ICs, 24 connectors and 16 diodes.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierTLP222AF
DIP-41.3V 100us 2.5kV 2Ω 60V 800us One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays - MOS Output (PhotoMOS)LTV-847S-BC
SMD-16P-30℃~+100℃ 1.2V 100mV@20mA,1mA 200mW 35V 3us 4 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-16P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
README
README.mdPCBs
Parts
216| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +32 |
| 16 | 0R0 | Resistors_SMD:R_1206 | R49, R50, R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64 |
| 16 | C | Capacitors_SMD:C_0805 | C2, C4, C16, C17, C19, C20, C22, C23, C25, C26, C28, C29, C31, C32, C34, C35 |
| 16 | DIODE | Diodes_SMD_Addons:SOD-323-Handsoldering | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | DUAL_LDR | Housings_DIP:DIP-6_W7.62mm | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 16 | POT | Potentiometer_addons:Potentiometer_Piher_3-8Zoll__Angular_ScrewFront | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12, RV13, RV14, RV15, RV16 |
| 11 | CONN_01X02 | Connect:PINHEAD1-2 | P2, P5, P8, P9, P10, P11, P12, P13, P14, P15, P16 |
| 8 | 100nF | Capacitors_SMD:C_0805 | C1, C15, C18, C21, C24, C27, C30, C33 |
| 8 | LM358 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U20, U21, U22, U23, U24, U25, U26, U27 |
| 5 | 10uF | Capacitors_SMD:c_elec_4x5.8 | C3, C5, C6, C7, C8 |
| 5 | CONN_01X01 | Pin_Headers:Pin_Header_Angled_1x01 | P1, P6, P7, P23, P24 |
| 5 | CONN_01X01 | drillhole:hole | P17, P18, P19, P20, P21 |
| 5 | NSL-32 | Opto-Devices:Optoisolator_NSL-32 | U28, U29, U30, U31, U32 |
| 4 | 4K7 | Resistors_SMD:R_0805_HandSoldering | R65, R66, R67, R68 |
| 3 | 10 nF | Capacitors_SMD:C_0805 | C12, C13, C14 |
| 3 | 2uF | Capacitors_SMD:C_0805 | C9, C10, C11 |
| 3 | TLP222A | Housings_DIP:DIP-4_W7.62mm_LongPads | U36, U38, U39 |
| 2 | 10K | Resistors_SMD:R_0805_HandSoldering | R76, R79 |
| 2 | 1K8 | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R70, R75 |
| 2 | 1M | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R74, R111 |
| 2 | 2M2 | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R71, R73 |
| 2 | 47K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R77, R78 |
| 2 | CONN_02X20 | Connect:IDC_Header_Straight_40pins | P3, P22 |
| 2 | DG403 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U33, U40 |
| 2 | INDUCTOR_SMALL | Capacitors_SMD:C_0805_HandSoldering | L1, L2 |
| 1 | 15u | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C41 |
| 1 | 1nF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C42 |
| 1 | 1u | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C40 |
| 1 | 20nF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C37 |
| 1 | 2nF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C38 |
| 1 | 470K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R69 |
| 1 | 680K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R72 |
| 1 | 82pF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C39 |
| 1 | C | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C36 |
| 1 | CONN_01X06 | Connect:PINHEAD1-6 | P4 |
| 1 | DG445 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U35 |
| 1 | LTV847S | Housings_DIP:DIP-16_W7.62mm_LongPads | U37 |
More from mrwillem/PCBs
12- 4 layers

- 4 layers91 × 100 mm

- 6 layers100 × 95 mm

- 4 layers92 × 98 mm

- 4 layers92 × 98 mm

- 2 layers173 × 114 mm

- 4 layers79 × 80.5 mm

- 4 layers126.2 × 94 mm

- 2 layers100 × 105 mm

- 4 layers

- 4 layers100 × 59 mm

- 2 layers56 × 100 mm

Similar boards
- 2 layers68 × 86.9 mm

NBoxRpi
trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.
95 parts5CC-BY-SA-4.0 - 2 layers100.3 × 99.3 mm

Miatuino
Maverick765/miatuino
まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。
121 parts1GPL-2.0 - 4 layers85 × 45 mm

Poc 4cell
cajt/poc-scp-ft-4s-bms-app
Proof of concept fault tolerant SCP with a BMS Application.
85 partsBSD-2-Clause - 2 layers81.3 × 63.5 mm

- 2 layers21 × 37.3 mm

- 2 layers113.5 × 70.5 mm

- 2 layers71.5 × 50.6 mm

- 2 layers93.2 × 117 mm

Questions
What parts does the ToneControls use?
216 parts, built around the LM358, TLP222AF and LTV-847S-BC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ToneControls KiCad files?
From the mrwillem/PCBs repository on GitHub, at the commit this page was made from: the board is ToneControls/ToneControls.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ToneControls design in my own project?
Its repository states no licence, so its author keeps all rights: ask mrwillem before reusing the design.