4 layers101.6 × 162.6 mm
2 layers86.4 × 86.4 mm
CAFlash
mribble/CameraAxe61Camera Axe 6
- Size
- 86.4 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 54
- Pads
- 509
- Tracks, vias
- 259, 77
- Pours
- 38
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Dec 2016
- Updated
- 30 May 2019
Overview
CAFlash is an open-source printed circuit board by mribble, from the mribble/CameraAxe6 repository on GitHub. It is a 2-layer board of 86.4 × 86.4 mm with 79 parts on 54 nets, routed with 259 tracks and 77 vias.
It is built around the ATTINY44-20SSU, ZXGD3009DYTA and UA78M05CDCYR, with the FQD10N20CTM and IRFS4227 among its other parts. Its parts include 39 diodes, 12 resistors, 10 capacitors, 4 ICs and 4 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATTINY44-20SSU
SOIC-14SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ZXGD3009DYTA
SOT-363-55℃~+150℃ 1 1.38A 1.58A 20nA 210ns 240ns 40V Low Side MOSFET SOT-363 Gate Drivers ROHSDiodes IncorporatedGate Drivers
UA78M05CDCYR
SOT-2230℃~+125℃@(Ta) 1 25V 2V 4.5mA 40uV 500mA 5V 62dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FQD10N20CTM
TO-252AA-55℃~+150℃ 1 N-channel 125pF 200V 26nC@10V 360mΩ@10V 4V 50W 510pF 53pF 7.8A N-Channel ±30V TO-252AA MOSFETs ROHSonsemiMOSFETs
IRFS4227
D2PAK200V, 63A, N-Channel Power MOSFETInfineon TechnologiesUncategorised
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | LED_PAD | CA6:LED_Cree-MHB-A | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +20 |
| 4 | 0.1uF | Capacitors_SMD:C_0603 | C2, C3, C8, C9 |
| 4 | HOLE | Mounting_Holes:MountingHole_3.2mm_M3_Pad | X1, X2, X3, X4 |
| 3 | 100K | Resistors_SMD:R_0603 | R5, R6, R9 |
| 3 | 10uF | Capacitors_SMD:C_1206 | C4, C5, C7 |
| 3 | 1K | Resistors_SMD:R_0603 | R4, R11, R13 |
| 3 | 470 | Resistors_SMD:R_0603 | R1, R2, R8 |
| 2 | D_Schottky | Diodes_SMD:D_SMC | D2, D3 |
| 1 | 0.47uF | Capacitors_SMD:C_1812 | C10 |
| 1 | 100uF | Capacitors_SMD:CP_Elec_6.3x5.7 | C1 |
| 1 | 100uH | CA6:Bourns_SDR1307A | L1 |
| 1 | 1M | Resistors_SMD:R_1206 | R12 |
| 1 | 20K | Resistors_SMD:R_0603 | R14 |
| 1 | 22 | Resistors_SMD:R_1206 | R3 |
| 1 | 68uF | Capacitors_ThroughHole:CP_Radial_D12.5mm_P5.00mm | C6 |
| 1 | ATTINY44-20SSU | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U3 |
| 1 | CA_Logo_150 | CA6:CA_Logo_15mm | G1 |
| 1 | FQD10N20CTM | TO_SOT_Packages_SMD:TO-252-2 | Q1 |
| 1 | IRFS4227 | CA6:D2Pak | Q2 |
| 1 | JACK_STEREO | CA6:161-3334-E_Big_Pad | J8 |
| 1 | Jack-DC | CA6:BARREL_JACK_Round | J1 |
| 1 | LED2C | CA6:LED-SOT-23 | D1 |
| 1 | LED_LIGHT_PIPE | CA6:SLP3-150-100-R | U1 |
| 1 | Programmer | Socket_Strips:Socket_Strip_Straight_1x06_Pitch2.54mm | J2 |
| 1 | Thermistor | Resistors_SMD:R_0603 | TH1 |
| 1 | UA78M05CDCYR | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | ZXGD3009DYTA | TO_SOT_Packages_SMD:SOT-363_SC-70-6 | U4 |
The 77 most common of 79 parts.
Questions
How big is the CAFlash PCB?
It measures 86.4 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CAFlash use?
79 parts, built around the ATTINY44-20SSU, ZXGD3009DYTA, UA78M05CDCYR and FQD10N20CTM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAFlash KiCad files?
From the mribble/CameraAxe6 repository on GitHub, at the commit this page was made from: the board is CameraAxeFlash/Pcb/CAFlash.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAFlash design in my own project?
Its repository states no licence, so its author keeps all rights: ask mribble before reusing the design.
More from mribble/CameraAxe6
12- 2 layers108.7 × 45.7 mm
- 2 layers61 × 45.7 mm
- 2 layers101.6 × 162.6 mm
- 2 layers63.5 × 33 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers45.7 × 36.8 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers45.7 × 36.8 mm
Similar boards
- 6 layers150 × 87 mm
POWERCORE V2.0 MOTHERBOARD
Rack-Robotics/Powercore-V2.0
Open-Source wire EDM power supply by Rack Robotics, Inc.
254 parts258 - 2 layers71 × 63 mm
PowerSection
brettski74/Modular-Solder-Reflow
Modular designs for a DIY solder reflow hotplate, controller, power supply and more.
39 parts6 - 2 layers108.2 × 124.9 mm
- 2 layers54.4 × 26 mm
USBtiny ISP Programmer ATtiny44
abdontroche/FabISP-USBtinyISP-ATtiny44
This is a version of the Fab-ISP programmer that is used in the Fab Academy course around the world
16 parts6MIT - 2 layers35.6 × 17.8 mm
AutoFlyer
mribble/ElectricEelWheel5
The Electric Eel Wheel 5 is an electric spinning wheel that converts fiber (an example being sheep's wool) into yarn. This site contains the open source files for this project.
18 parts14 - 2 layers36.8 × 34.7 mm
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers128.8 × 99.5 mm
WarriorAttend
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
79 parts915 - 2 layers80 × 107.5 mm
Minino
ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.
79 parts183GPL-3.0