2 layers86.4 × 86.4 mm
4 layers101.6 × 162.6 mm
Camera Axe 6
- Size
- 101.6 × 162.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 184
- Nets
- 205
- Pads
- 748
- Tracks, vias
- 2,648, 377
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Dec 2016
- Updated
- 30 May 2019
Overview
CA6 is an open-source printed circuit board by mribble, from the mribble/CameraAxe6 repository on GitHub. It is a 4-layer board of 101.6 × 162.6 mm with 184 parts on 205 nets, routed with 2,648 tracks and 377 vias.
It is built around the SN74AHC1G08DBV and BSS138P. Its parts include 66 resistors, 41 capacitors, 16 transistors, 10 connectors and 9 diodes. It belongs with the ESP8266 and SAM D and SAM boards of this library.
Main components
2
SN74AHC1G08DBV
SOT-23-5-55℃~+125℃ 1 1.5V~3.85V 1.9V~2V、2.9V~3V、3.8V、4.4V~4.5V 1uA 2 2V~5.5V 440mV 500mV~1.65V 7.9ns@5V,50pF 74AHC Series 8mA 8mA AND Gate SOT-23-5 Logic Gates ROHSTexas InstrumentsLogic Gates
BSS138P
SOT-23-55℃~+150℃ 1 N-channel 1.5V 1.6Ω@10V 350mW、1.14W 360mA 50pF 60V 800pC@4.5V SOT-23 MOSFETs ROHSNexperiaMOSFETs
Parts
184| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10K | CA6:SM0603_Resistor | R1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R21, R61, R63 +5 |
| 18 | 0.1uf | CA6:c_0603 | C3, C4, C10, C11, C12, C13, C15, C19, C21, C22, C29, C34, C35, C38, C39, C40 +2 |
| 18 | 274R | CA6:SM0603_Resistor | R22, R23, R24, R30, R33, R34, R37, R38, R41, R42, R45, R46, R49, R50, R53, R54 +2 |
| 16 | 680R | CA6:SM0603_Resistor | R31, R32, R35, R36, R39, R40, R43, R44, R47, R48, R51, R52, R55, R56, R59, R60 |
| 16 | BSS138P | CA6:SOT23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 13 | 10uf | CA6:c_1206 | C1, C2, C5, C9, C16, C18, C28, C30, C31, C32, C33, C37, C42 |
| 9 | Jumper_NC_Small | CA6:Jumper_connected | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 9 | LED2C | CA6:LED-SOT-23 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 8 | CAM/FLASH | CA6:161-3334-E_Big_Pad | CAM0, CAM1, CAM2, CAM3, CAM4, CAM5, CAM6, CAM7 |
| 5 | 100k | CA6:SM0603_Resistor | R17, R18, R19, R20, R25 |
| 5 | 20pf | CA6:c_0603 | C14, C17, C20, C24, C25 |
| 4 | 100uf | CA6:c_elec_6.3x5.7 | C6, C7, C23, C26 |
| 4 | HOLE | CA6:HOLE_3.0mm | X1, X2, X3, X4 |
| 3 | Ferrite Bead | CA6:SM0805 | FB1, FB2, FB3 |
| 3 | VR | CA6:SM0603 | VR1, VR2, VR3 |
| 2 | 39R | CA6:SM0603_Resistor | R26, R27 |
| 2 | 4.7k | CA6:SM0603_Resistor | R62, R65 |
| 2 | 74LS244 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1, U2 |
| 1 | 10uF | CA6:c_1206 | C27 |
| 1 | 30K | CA6:SM0603_Resistor | R29 |
| 1 | 32khz | CA6:AB26TRQ | X8 |
| 1 | 6K8+1% | CA6:SM0603_Resistor | R28 |
| 1 | ATSAM3X8EA-AU_LQFP-144 | CA6:TQFP144 | U16 |
| 1 | AUX | CA6:IDC_50PIN(2X25)-90 | J6 |
| 1 | BATTERY | CA6:BATTERY_4AA_12BH348-GR | BT1 |
| 1 | BAT_CON | CA6:Screw_Terminal_Block_2P | J2 |
| 1 | BUTTON_0 | CA6:PTS645_throughhole | SW4 |
| 1 | CA_LOGO_150 | CA6:CA_Logo_15mm | LOGO1 |
| 1 | CRYSTAL_4 | CA6:CRYSTAL_ABM3B | X7 |
| 1 | Connection_Card | Socket_Strips:Socket_Strip_Straight_2x06_Pitch2.54mm | P2 |
| 1 | ERASE | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | ESP-12E/F | CA6:ESP-12E-B | U4 |
| 1 | ESP-Programming-FTDI | Socket_Strips:Socket_Strip_Straight_1x06_Pitch2.54mm | P3 |
| 1 | FUSE | CA6:SM1812 | F1 |
| 1 | JTAG | CA6:JTAG_20021121-00010C4LF | P1 |
| 1 | MICRO_USB | CA6:USB_MICRO_10118194-0001LF | J1 |
| 1 | MODULE_0 | CA6:RJ45_pcbwing | J3 |
| 1 | MODULE_1 | CA6:RJ45_pcbwing | J5 |
| 1 | MODULE_2 | CA6:RJ45_pcbwing | J4 |
| 1 | MODULE_3 | CA6:RJ45_pcbwing | J8 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_PTS645 | SW3 |
| 1 | SN74AHC1G08 | CA6:SOT-23-5_GATE | U3 |
| 1 | USB/BATTERY | Buttons_Switches_ThroughHole:SW_E-Switch_EG1224_SPDT_Angled | SW2 |
| 1 | VREG_33 | CA6:SOT223-5 | U12 |
Questions
How big is the CA6 PCB?
It measures 101.6 × 162.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CA6 use?
184 parts, built around the SN74AHC1G08DBV and BSS138P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CA6 KiCad files?
From the mribble/CameraAxe6 repository on GitHub, at the commit this page was made from: the board is Pcb/CA6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CA6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mribble before reusing the design.
More from mribble/CameraAxe6
12- 2 layers108.7 × 45.7 mm
- 2 layers61 × 45.7 mm
- 2 layers101.6 × 162.6 mm
- 2 layers63.5 × 33 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers45.7 × 36.8 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers45.7 × 36.8 mm
Similar boards
- 4 layers110 × 46 mm
- 4 layers205.5 × 152 mm
- 2 layers83 × 38 mm
Ultraphotonicsense elec
PhenixRobotik/ultraphotonicsense-elec
Board for ToF sensors management
80 partsGPL-3.0 - 4 layers72 × 51.1 mm
Esp32s3-audio streamer
wemaxon/esp32-audio-streamer
Hardware design for a WiFi/Bluetooth audio streamer using the esp32 microcontroller and the PCM5102A DAC, intended to be used with squeezelite firmware.
63 parts - 4 layers238.4 × 144.7 mm
- 2 layers40 × 40 mm
NeoBoard
alvaroferran/NeoBoard
Robotics controller shield for the NanoPi Neo Air with two DC motor drivers and a LiPo battery charger
73 parts3 - 2 layers145 × 130 mm
Phaser
cillian64/phaser
Hardware device to track mains frequency and distinguish outlets on different phases
49 parts - 2 layers120 × 83 mm
Accord logger
jgazeley/accord
Raspberry Pi Pico W firmware and keyless-entry hardware for a 2001 Honda Accord.
147 partsApache-2.0