2 layers49 × 39 mm
2 layers145 × 130 mm
Phaser
cillian64/phaserHardware device to track mains frequency and distinguish outlets on different phases
- Size
- 145 × 130 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 31
- Pads
- 196
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 14 Oct 2016
- Updated
- 4 Nov 2016
Overview
Phaser is an open-source printed circuit board by cillian64, from the cillian64/phaser repository on GitHub. It is a 2-layer board of 145 × 130 mm with 49 parts on 31 nets.
It is built around the AD8541ARZ, BQ24232HARGT and LMX93, with the BSS138P among its other parts. Its parts include 14 capacitors, 12 resistors, 7 ICs, 6 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
4
AD8541ARZ
SOIC-8-40℃~+125℃ 1 100pA 15mA 1nA 2.7V~5.5V 40dB 42nV/√Hz@1kHz 45uA 4uV/℃ 6mV 800V/ms 980kHz Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational Amplifier
BQ24232HARGT
VQFN-16-EP(3x3)-5℃~+125℃ 4.35V 4.35V~10.2V 500mA 6.5uA Charging IC Lithium Battery Support VQFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery Management
LMX93
UncategorisedSTMicroelectronics
BSS138P
SOT-23-55℃~+150℃ 1 N-channel 1.5V 1.6Ω@10V 350mW、1.14W 360mA 50pF 60V 800pC@4.5V SOT-23 MOSFETs ROHSNexperiaMOSFETs
README
README.mdphaser
Hardware device to track mains frequency and distinguish outlets on different phases
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | agg:0603 | R2, R4, R6, R7, R8, R12 |
| 5 | 100n | agg:0603 | C7, C11, C12, C13, C14 |
| 4 | 1u | agg:0603 | C2, C4, C5, C8 |
| 3 | 4u7 | agg:0603 | C3, C6, C10 |
| 3 | 68 | agg:0603 | R9, R10, R11 |
| 3 | BSS138P | agg:SOT-23 | Q1, Q2, Q3 |
| 1 | 0.1uF/275V/X2 | footprints:ECQU2A104ML | C1 |
| 1 | 100mA TD | footprints:5x20_clip | F1 |
| 1 | 10n | agg:0603 | C9 |
| 1 | 1k8 | agg:0603 | R1 |
| 1 | 230/6+6 1VA | footprints:VB1.0-2-6 | T1 |
| 1 | 45k | agg:0603 | R3 |
| 1 | 50k | agg:0603 | R5 |
| 1 | AD8541 | agg:SOT-23-5 | IC4 |
| 1 | BATT | footprints:JST-PH-2 | P2 |
| 1 | BLUE | agg:SIL-254P-02 | D3 |
| 1 | BQ24232HA | agg:QFN-16-EP-TI | IC2 |
| 1 | CLK_SRC | agg:SIL-254P-03 | SW2 |
| 1 | COAX | agg:SMA-EDGE | P3 |
| 1 | FOX924B-20.000 | footprints:FOX924 | U2 |
| 1 | L | agg:SIL-254P-01 | P1 |
| 1 | LMx93 | agg:SOIC-8 | IC3 |
| 1 | MCP1700 | agg:SOT-23 | IC1 |
| 1 | MICROUSB | agg:MICROUSB_MOLEX_47589-0001 | J1 |
| 1 | N | agg:SIL-254P-01 | P5 |
| 1 | RED | agg:SIL-254P-02 | D1 |
| 1 | STM32F042K4U6 | agg:QFN-32-EP-ST | IC5 |
| 1 | SW | agg:SIL-254P-02 | SW1 |
| 1 | SWD_TC | agg:TC2030-NL | P4 |
| 1 | VTX-214-003-105 | footprints:VTX214 | U1 |
| 1 | YELLOW | agg:SIL-254P-02 | D2 |
Questions
How big is the Phaser PCB?
It measures 145 × 130 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Phaser use?
49 parts, built around the AD8541ARZ, BQ24232HARGT, LMX93 and BSS138P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phaser KiCad files?
From the cillian64/phaser repository on GitHub, at the commit this page was made from: the board is hardware/phaser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phaser design in my own project?
Its repository states no licence, so its author keeps all rights: ask cillian64 before reusing the design.
Similar boards
- 2 layers
- 2 layers100 × 100 mm
- 4 layers238.4 × 144.7 mm
- 2 layers44 × 44 mm
- 2 layers40 × 40 mm
NeoBoard
alvaroferran/NeoBoard
Robotics controller shield for the NanoPi Neo Air with two DC motor drivers and a LiPo battery charger
73 parts3 - 2 layers14.4 × 24.9 mm
- 4 layers101.6 × 162.6 mm
