Skip to the content
12345678

AD8541ARZ

Analog DevicesExtended

-40℃~+125℃ 1 100pA 15mA 1nA 2.7V~5.5V 40dB 42nV/√Hz@1kHz 45uA 4uV/℃ 6mV 800V/ms 980kHz Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
adi/AD8541ARZ
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
177 at JLCPCB (C652934)
Used on
12 open-source boards

Overview

The AD8541ARZ is an operational Amplifier made by Analog Devices in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 100pA 15mA 1nA 2.7V~5.5V 40dB 42nV/√Hz@1kHz 45uA 4uV/℃ 6mV 800V/ms 980kHz Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AD8541ARZ, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 177 are in stock at JLCPCB (part C652934). 12 open-source boards in 8 repositories on GitHub use it.

Symbol

1NC5NC8NC4V-7V+6OUTA2IN A–3IN A+
EasyEDA_Cloud:AD8541ARZFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the AD8541ARZ
PinNameType
1NCUnspecified
2IN A–Unspecified
3IN A+Unspecified
4V-Unspecified
5NCUnspecified
6OUTAOutput
7V+Unspecified
8NCUnspecified

Open-source boards using it

12See all 12
  • 2 layers44 × 44 mmMeteostation, the printed circuit board in 3D

    Meteostation

    Maniak003/Meteostation

    109 parts7
  • 2 layers14.4 × 24.9 mmHvoltmeter, the printed circuit board in 3D

    Hvoltmeter

    Maniak003/HV-voltmeter

    High voltage (to 3kV) voltmeter

    35 parts3
  • 4 layers96 × 43 mmOutdoor module, the printed circuit board in 3D

    Outdoor module

    shm-dmitry/auto_close_window

    This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

    127 parts1Apache-2.0
  • 2 layers145 × 130 mmPhaser, the printed circuit board in 3D

    Phaser

    cillian64/phaser

    Hardware device to track mains frequency and distinguish outlets on different phases

    49 parts
  • 4 layers97 × 55 mmPowerSupply, the printed circuit board in 3D

    PowerSupply

    MSUMuonDetector/MuonDetector

    Hobbyist muon detector meant to be used while hiking. For our senior design project

    51 parts
  • 2 layers40.5 × 35 mmAtmega kicad, the printed circuit board in 3D

    Atmega kicad

    Pauloux/Projet-ATCE

    Projet du cours ATCE portant sur l'asservissement d'un oscillateur à quartz

    35 partsGPL-3.0
  • 2 layers101.6 × 101.6 mmRelay board hardware, the printed circuit board in 3D

    Relay board hardware

    SeniorDesign-2024/Relay-Board

    Repo for relay board that controls the charging port connection state

    24 parts
  • 4 layers97.5 × 52 mmMain module, the printed circuit board in 3D

    Main module

    shm-dmitry/auto_close_window

    This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

    121 parts1Apache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AD8541ARZ?

Yes. The symbol is EasyEDA_Cloud:AD8541ARZ and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AD8541ARZ?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the AD8541ARZ datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the AD8541ARZ?

JLCPCB lists it as part C652934, with 177 in stock; the sellers' links on this page open their listings.

What can replace the AD8541ARZ?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AD8541ARZ?

12 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.