4 layers101.6 × 162.6 mm
2 layers108.7 × 45.7 mm
Projectile
mribble/CameraAxe61Camera Axe 6
- Size
- 108.7 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 19
- Pads
- 92
- Tracks, vias
- 200, 29
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Dec 2016
- Updated
- 30 May 2019
Overview
Projectile is an open-source printed circuit board by mribble, from the mribble/CameraAxe6 repository on GitHub. It is a 2-layer board of 108.7 × 45.7 mm with 39 parts on 19 nets, routed with 200 tracks and 29 vias.
Its parts include 16 resistors, 8 capacitors, 6 diodes, 4 crystals and 2 ICs.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 49.9 | Resistors_SMD:R_0603 | R6, R8, R9, R10 |
| 4 | HOLE | Mounting_Holes:MountingHole_2.5mm_Pad | X1, X2, X3, X4 |
| 4 | LED | LEDs:LED_D5.0mm | D2, D3, D4, D5 |
| 3 | 0.1uF | Capacitors_SMD:C_0603 | C2, C7, C8 |
| 2 | 100K | Resistors_SMD:R_0603 | R7, R13 |
| 2 | 10K | Resistors_SMD:R_0603 | R14, R15 |
| 2 | 1K | Resistors_SMD:R_0603 | R4, R16 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C3, C5 |
| 2 | 280R | Resistors_SMD:R_0603 | R3, R11 |
| 2 | 4.3pF | Capacitors_SMD:C_0805 | C4, C6 |
| 2 | 49.9R | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 8.98K | Resistors_SMD:R_0603 | R5, R12 |
| 2 | D_Photo | LEDs:LED_D5.0mm | D1, D6 |
| 2 | OPA320 | TO_SOT_Packages_SMD:SOT-23-5 | U1, U2 |
| 2 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 1 | 10uF | Capacitors_SMD:C_1206 | C1 |
| 1 | JACK_RJ45 | CA6:RJ45_pcbwing | J1 |
Questions
How big is the Projectile PCB?
It measures 108.7 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Projectile use?
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Projectile KiCad files?
From the mribble/CameraAxe6 repository on GitHub, at the commit this page was made from: the board is Pcb/Modules/Projectile/Projectile.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Projectile design in my own project?
Its repository states no licence, so its author keeps all rights: ask mribble before reusing the design.
More from mribble/CameraAxe6
12- 2 layers86.4 × 86.4 mm
- 2 layers61 × 45.7 mm
- 2 layers101.6 × 162.6 mm
- 2 layers63.5 × 33 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers45.7 × 36.8 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers45.7 × 36.8 mm
Similar boards
- 2 layers24.4 × 24.4 mm
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k - 2 layers100 × 33.5 mm
Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm
VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm
Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers40 × 20 mm
ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers100 × 70.3 mm
- 2 layers81.3 × 53.3 mm
RGB LED 1.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
39 parts429GPL-2.0 - 2 layers65.7 × 44.8 mm
