2 layers88.9 × 106 mm
2 layers23 × 100 mm
Split mult
mort13/clandestine_circuitry12Collection of diy synth projects
- Size
- 23 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 17
- Pads
- 78
- Tracks, vias
- 113, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 6 May 2025
Overview
Split mult is an open-source printed circuit board by mort13, from the mort13/clandestine_circuitry repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 23 × 100 mm with 23 parts on 17 nets, routed with 113 tracks and 33 vias.
Its parts include 8 resistors, 7 connectors, 4 capacitors, 2 diodes and 1 IC.
README
README.mdclandestine_circuitry
Collection of diy synth projects Be aware, some schematics and boardfiles may contain errors and bugs. Especially the ones designed by me.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | AudioJack3 | mort_mix:Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J1, J2, J3, J4, J6, J7 |
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4 |
| 2 | 0.1uF_0603_16V | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R6 |
| 2 | 1N5819 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp | D1, D2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7, R8 |
| 2 | 47uF_5x5.3_16V | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Bourns_PTV112-4_Dual_Vertical | RV1 |
| 1 | Eurorack_Power_10pin_Unshrouded | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J5 |
| 1 | TL074 | PCM_4ms_Package_DIP:DIP-14_W7.62mm | U1 |
Questions
How big is the Split mult PCB?
It measures 23 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Split mult use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Split mult KiCad files?
From the mort13/clandestine_circuitry repository on GitHub, at the commit this page was made from: the board is split_mult/split_mult.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Split mult design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from mort13/clandestine_circuitry
12- 2 layers164.5 × 106 mm
- 2 layers69.2 × 107 mm
- 4 layers88.9 × 109.9 mm
- 2 layers88.9 × 106 mm
- 2 layers69.2 × 106.7 mm
- 2 layers39.3 × 106.7 mm
- 2 layers48.8 × 110 mm
- 2 layers38.7 × 106.7 mm
- 2 layers35.6 × 110 mm
- 2 layers43 × 110 mm
- 2 layers90.3 × 113.3 mm
Similar boards
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258