

Tal watch
- Size
- 24.7 × 24.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 28
- Pads
- 131
- Tracks, vias
- 257, 28
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Oct 2025
- Updated
- 8 Jul 2026
Overview
Tal watch is an open-source printed circuit board by moizZM, from the moizZM/PCB-Design-Work repository on GitHub. It is a 2-layer board of 24.7 × 24.7 mm with 28 parts on 28 nets, routed with 257 tracks and 28 vias.
It is built around the ATTINY1616-SN, CR2032 and RV-3028-C7. Its parts include 13 diodes, 8 resistors, 3 capacitors, 3 ICs and 1 switch. It belongs with the wearables boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY1616-SN
SOIC-20-300mil-40℃~+105℃ 1.8V~5.5V 16KB 18 20MHz 256Byte 2KB 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CR2032
-- Unclassified goods ROHSMaxellUncategorisedRV-3028-C7
DFN-8(1.5x3.2)DFN-8(1.5x3.2) Real Time Clocks ROHSMicro CrystalReal Time Clocks
README
USB-C Power Supply/README.mdUSB-C Power Supply
3D viwe
Layout
USB-C Power Supply
Overview
This project demonstrates the complete design and development of a USB-C Power Supply circuit.
The goal was to create a small PCB that outputs 5 V through a USB Type-C connector using correct CC (Configuration Channel) resistors.
The board includes a power indicator LED, decoupling capacitors, and is fully ready for JLCPCB manufacturing.
What Was Done
- Designed a schematic in KiCad 8.0 for a 5 V USB-C power source.
- Implemented CC1 and CC2 pull-down resistors (5.1 kΩ) for correct USB-C negotiation.
- Added 100 nF decoupling capacitor for voltage stability.
- Added LED indicator with 1 kΩ resistor for power-on status.
- Created and annotated all symbols and footprints in KiCad.
- Designed a two-layer PCB layout following JLCPCB design rules.
- Defined board outline, silkscreen labels, mounting holes, and reference text.
- Generated Gerber, Drill, BOM, and Pick-and-Place files for fabrication.
- Verified schematic (ERC) and layout (DRC) before manufacturing.
- Prepared files for JLCPCB assembly and optional 3D-printed enclosure.
Hardware Details
| Parameter | Description |
|---|---|
| Input | USB-C Receptacle (VBUS = 5 V) |
| Output | 2-Pin Header (5 V / GND) |
| Resistors | 5.1 kΩ × 2 (CC1/CC2), 1 kΩ × 1 (LED) |
| Capacitors | 100 nF (Decoupling) |
| Indicator | Power LED |
| Board Layers | 2 |
| Power | 5 V @ up to 3 A |
| Mounting | 4 × M2 holes |
Project Files
USB-C Power Supply.kicad_pro– KiCad project fileUSB-C Power Supply.kicad_sch– SchematicUSB-C Power Supply.kicad_pcb– PCB layoutSCH.pdf– Printable schematic reference
Manufacturing and Assembly
- Export Gerber and Drill files from KiCad.
- Upload the ZIP archive to JLCPCB.
- Choose desired solder-mask and silkscreen colors.
- (Optional) Add logo or image for silkscreen layer.
- Order boards (with or without assembly) and test after delivery.
Testing
- Connected a USB-C cable from a 5 V adapter.
- Verified 5 V output at the terminal header.
- Observed LED indicator ON confirming active power.
- Ensured no short circuits or trace issues.
Results
The PCB provides a stable 5 V output, compact design, and clear labeling.
It can serve as a reference or base module for USB-powered embedded projects or sensor systems that need a simple regulated power supply.
Tools Used
- KiCad 8.0 – Schematic capture and PCB layout
- JLCPCB – PCB manufacturing and assembly
- Fusion 360 (optional) – Enclosure and 3D model design
Author
Moiz Zaheer Malik
Hochschule Hamm-Lippstadt (HSHL)
October 2025
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | LED | LED_SMD:LED_Kingbright_AAA3528ESGCT | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 4 | 100 | Resistor_SMD:R_0201_0603Metric | R1, R6, R7, R15 |
| 2 | 100nF | Capacitor_SMD:C_0201_0603Metric | C2, C3 |
| 2 | 10K | Resistor_SMD:R_0201_0603Metric | R4, R5 |
| 2 | 4.7K | Resistor_SMD:R_0201_0603Metric | R2, R3 |
| 1 | 10uF | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | ATtiny1616-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | CR2032 | CR2032:CR2032-SMD | U4 |
| 1 | RV-3028-C7 | Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
More from moizZM/PCB-Design-Work
2- 4 layers23.2 × 29 mm

- 2 layers30 × 32 mm

Similar boards
- 2 layers85.6 × 54 mm

PersonalPCB BC
Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake
73 partsMIT - 2 layers80.5 × 53.8 mm

- 4 layers65 × 56 mm

Kingfisher hat
westphae/kingfisher
Go flight data recorder for a turbonormalized Beech Bonanza V35B, running on a Raspberry Pi 5
53 parts - 2 layers50.8 × 50.8 mm

DC2026 LASIR
CmdrZin/chips_avr_examples
AVR assembly and C code for robotics and other projects.
38 parts6MIT - 4 layers174 × 29 mm

- 2 layers25.4 × 28.8 mm

Kicad linear
fjalvingh/8bit-busdisplay
PCB for showing an 8 bit hex number from a 5V bus on a 7-segment display using an ATTINY1616
7 parts1 - 2 layers100 × 60 mm

- 2 layers81.2 × 46.1 mm

Lightmeter
empdo/lightmeter
An open-hardware handheld photographic light meter. Set shutter speed and ISO on two dials, press the button, and one of nine LEDs lights up to show the aperture you should use. Runs from a single CR2032.
47 parts
Questions
How big is the Tal watch PCB?
It measures 24.7 × 24.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tal watch use?
28 parts, built around the ATTINY1616-SN, CR2032 and RV-3028-C7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tal watch KiCad files?
From the moizZM/PCB-Design-Work repository on GitHub, at the commit this page was made from: the board is Binary Watch/tal watch.kicad_pcb and its schematic ATtiny Microcontroller Board/attiny microcontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tal watch design in my own project?
Its repository states no licence, so its author keeps all rights: ask moizZM before reusing the design.